Alumaweld Stryker Inboard 2011 boat specs
Alumaweld
Alumaweld Stryker Inboard 2011
2011
View full specs →
VS
Alumaweld Stryker Sterndrive 2008 boat specs
Alumaweld
Alumaweld Stryker Sterndrive 2008
2008
View full specs →

Alumaweld Stryker Inboard 2011 vs Alumaweld Stryker Sterndrive 2008 — A Close Look at Two Modified Vees

When two boats share the same hull type — in this case both the Alumaweld Stryker Inboard 2011 and the Alumaweld Stryker Sterndrive 2008 are modified vee designs with aluminum construction — the buying decision usually comes down to a handful of practical questions: how many people are you putting on the water, how far do you trailer, and what does your tow vehicle weigh?

On paper these two are close siblings in the size department — Alumaweld Stryker Inboard 2011 at 20,3 ft versus Alumaweld Stryker Sterndrive 2008 at 19,0 ft. Weight tells a clearer story for trailering families: the Alumaweld Stryker Inboard 2011 tips the scales at 1 665 lbs — 1 446 lbs more than the Alumaweld Stryker Sterndrive 2008 at 219 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.

The power gap is worth calling out. Rated to 225 hp, the Alumaweld Stryker Sterndrive 2008 has a 25-hp advantage over the Alumaweld Stryker Inboard 2011's 200-hp ceiling — enough to notice on acceleration and at cruising speed, particularly with a full passenger load. Both carry nearly identical fuel loads — 38 gal and 38 gal — so range won't be a tiebreaker here.

Both boats are rated for 5 passengers — a good fit for a family of four or five plus guests. Comfort at capacity is another matter; the longer hull typically means more seat options and better weight distribution.

Bottom line: Performance buyers should lean toward the Alumaweld Stryker Sterndrive 2008 and its 225-hp ceiling. If fuel economy and quieter running matter more than top-end speed, the Alumaweld Stryker Inboard 2011 with its 200-hp rating is the more economical daily driver.
General Boat Info
MakeAlumaweld
MakeAlumaweld
ModelStryker Inboard
ModelStryker Sterndrive
Model Year2011
Model Year2008
Measurements / Dimensions
Beam94 in. At Chine: 72 in
Beam85.5 in. At Chine: 66 in
Beam - Meters2.39
Beam - Meters2.18
Beam - Inches94
Beam - Inches85.5
Deadrise14℃ RMV
Deadrise14℃ RMV
Depth - Detail26 in
Depth - Detail26 in
Depth - Centimeters66.04
Depth - Centimeters66.04
Depth - Inches26
Depth - Inches26
Weight - Detail1,665 lbs
Weight - Detail2,190 lbs
Weight - kg755.23
Weight - kg993.37
Weight - lbs.1665
Weight - lbs.219
Height - DetailSide: 29 in
Height - DetailSide: 29 in
Height - Meters0.74
Height - Meters0.74
Height - Inches29
Height - Inches29
Length - Feet20.25
Length - Feet19
Length overall - Detail20 ft. 3 in
Length overall - Detail19 ft. 3 in
Length overall - Meters6.17
Length overall - Meters5.87
Length overall - Inches243
Length overall - Inches231
Length - Inchesnot available
Length - Inches3
Body / Hull
Hull materialAluminum
Hull materialAluminum
Hull thicknessBottom: 0.190 in. Side: 0.125 in. Transom: 0.125 in
Hull thicknessBottom: 0.190 in. Side: 0.125 in
Hull typeModified Vee
Hull typeModified Vee
Engine and Drivetrain
Fuel tank capacity - Detail38 gal
Fuel tank capacity - Detail38 gal
Fuel tank capacity - Liters143.85
Fuel tank capacity - Liters143.85
Fuel tank capacity - Gal38
Fuel tank capacity - Gal38
Fuel typeGas
Fuel typeGas
Drive typeInboard
Drive typeJet Drive
Engine max200 hp
Engine max225 hp
Operational Info
Maximum capacity1,200 lbs
Maximum capacity1,200 lbs
Maximum people5 at 750 lbs
Maximum people5 @ 750 lbs

Alumaweld Stryker Inboard 2011 vs Alumaweld Stryker Sterndrive 2008 — Common Questions

Which is the larger boat — the Alumaweld Stryker Inboard 2011 or the Alumaweld Stryker Sterndrive 2008?
The Alumaweld Stryker Inboard 2011 is the longer of the two at 20,3 feet overall. The Alumaweld Stryker Sterndrive 2008 comes in at 19,0 feet, making it roughly 1,3 ft shorter — a meaningful difference in deck room and overall on-water presence.
Which is easier to trailer — the Alumaweld Stryker Inboard 2011 or the Alumaweld Stryker Sterndrive 2008?
For trailering, the Alumaweld Stryker Sterndrive 2008 has the edge at 219 lbs dry weight versus 1 665 lbs for the Alumaweld Stryker Inboard 2011. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.
Which boat can handle a bigger outboard?
The Alumaweld Stryker Sterndrive 2008 is rated to a maximum of 225 hp, giving it the larger power ceiling. The Alumaweld Stryker Inboard 2011 tops out at 200 hp. Keep in mind that maximum ratings are just that — matching the motor to the actual load and usage pattern usually matters more than chasing the ceiling.
How many people can each boat hold?
The Alumaweld Stryker Inboard 2011 is Coast Guard rated for 5 passengers, while the Alumaweld Stryker Sterndrive 2008 is certified for 5. Note that legal capacity and comfortable capacity aren't always the same thing — on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.
Which boat is wider, and does it affect trailering?
The Alumaweld Stryker Inboard 2011 measures 94" wide, compared to 86" for the Alumaweld Stryker Sterndrive 2008. The US standard-width towing limit is 8’6" (102") in most states — anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.
How do the fuel tanks compare on the Alumaweld Stryker Inboard 2011 and Alumaweld Stryker Sterndrive 2008?
Both boats carry similar fuel loads — 38 gallons and 38 gallons respectively. Range will depend heavily on motor choice, throttle usage, and whether you're on flat lake water or coastal chop.
Are the Alumaweld Stryker Inboard 2011 and Alumaweld Stryker Sterndrive 2008 from the same manufacturer?
Yes — both the Alumaweld Stryker Inboard 2011 and the Alumaweld Stryker Sterndrive 2008 are built by Alumaweld. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.