Alumaweld Stryker Inboard 2011 boat specs
Alumaweld
Alumaweld Stryker Inboard 2011
2011
View full specs →
VS
Alumaweld Stryker Sport 2012 boat specs
Alumaweld
Alumaweld Stryker Sport 2012
2012
View full specs →

Alumaweld Stryker Inboard 2011 vs Alumaweld Stryker Sport 2012 — A Close Look at Two Modified Vees

When two boats share the same hull type — in this case both the Alumaweld Stryker Inboard 2011 and the Alumaweld Stryker Sport 2012 are modified vee designs with aluminum construction — the buying decision usually comes down to a handful of practical questions: how many people are you putting on the water, how far do you trailer, and what does your tow vehicle weigh?

On paper these two are close siblings in the size department — Alumaweld Stryker Inboard 2011 at 20,3 ft versus Alumaweld Stryker Sport 2012 at 18,3 ft. Weight tells a clearer story for trailering families: the Alumaweld Stryker Inboard 2011 tips the scales at 1 665 lbs — 480 lbs more than the Alumaweld Stryker Sport 2012 at 1 185 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.

The power gap is worth calling out. Rated to 200 hp, the Alumaweld Stryker Inboard 2011 has a 85-hp advantage over the Alumaweld Stryker Sport 2012's 115-hp ceiling — enough to notice on acceleration and at cruising speed, particularly with a full passenger load. Both carry nearly identical fuel loads — 38 gal and 38 gal — so range won't be a tiebreaker here.

Both boats are rated for 5 passengers — a good fit for a family of four or five plus guests. Comfort at capacity is another matter; the longer hull typically means more seat options and better weight distribution.

Bottom line: Performance buyers should lean toward the Alumaweld Stryker Inboard 2011 and its 200-hp ceiling. If fuel economy and quieter running matter more than top-end speed, the Alumaweld Stryker Sport 2012 with its 115-hp rating is the more economical daily driver.
General Boat Info
MakeAlumaweld
MakeAlumaweld
ModelStryker Inboard
ModelStryker Sport
Model Year2011
Model Year2012
Measurements / Dimensions
Beam94 in. At Chine: 72 in
Beam89 in. At Chine: 72 in
Beam - Meters2.39
Beam - Meters2.26
Beam - Inches94
Beam - Inches89
Deadrise14℃ RMV
Deadrise14℃
Depth - Detail26 in
Depth - Detail27.5 in
Depth - Centimeters66.04
Depth - Centimeters71.12
Depth - Inches26
Depth - Inches27.5
Weight - Detail1,665 lbs
Weight - Detail1,185 lbs
Weight - kg755.23
Weight - kg537.51
Weight - lbs.1665
Weight - lbs.1185
Height - DetailSide: 29 in
Height - DetailSide: 29 in
Height - Meters0.74
Height - Meters0.74
Height - Inches29
Height - Inches29
Length - Feet20.25
Length - Feet18.25
Length overall - Detail20 ft. 3 in
Length overall - Detail18 ft. 3 in
Length overall - Meters6.17
Length overall - Meters5.56
Length overall - Inches243
Length overall - Inches219
Height [transom]not available
Height [transom]20 in
Body / Hull
Hull materialAluminum
Hull materialAluminum
Hull thicknessBottom: 0.190 in. Side: 0.125 in. Transom: 0.125 in
Hull thicknessBottom: 0.160 in. Side: 0.100 in. Transom: 0.125 in
Hull typeModified Vee
Hull typeModified Vee
Engine and Drivetrain
Fuel tank capacity - Detail38 gal
Fuel tank capacity - Detail38 gal
Fuel tank capacity - Liters143.85
Fuel tank capacity - Liters143.85
Fuel tank capacity - Gal38
Fuel tank capacity - Gal38
Fuel typeGas
Fuel typeGas
Drive typeInboard
Drive typenot available
Engine max200 hp
Engine maxProp: 115 hp Jet: 80 hp
Operational Info
Maximum capacity1,200 lbs
Maximum capacity1,200 lbs
Maximum people5 at 750 lbs
Maximum people5 / 750 lbs

Alumaweld Stryker Inboard 2011 vs Alumaweld Stryker Sport 2012 — Common Questions

Which is the larger boat — the Alumaweld Stryker Inboard 2011 or the Alumaweld Stryker Sport 2012?
The Alumaweld Stryker Inboard 2011 is the longer of the two at 20,3 feet overall. The Alumaweld Stryker Sport 2012 comes in at 18,3 feet, making it roughly 2,0 ft shorter — a meaningful difference in deck room and overall on-water presence.
Which is easier to trailer — the Alumaweld Stryker Inboard 2011 or the Alumaweld Stryker Sport 2012?
For trailering, the Alumaweld Stryker Sport 2012 has the edge at 1 185 lbs dry weight versus 1 665 lbs for the Alumaweld Stryker Inboard 2011. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.
Which boat can handle a bigger outboard?
The Alumaweld Stryker Inboard 2011 is rated to a maximum of 200 hp, giving it the larger power ceiling. The Alumaweld Stryker Sport 2012 tops out at 115 hp. Keep in mind that maximum ratings are just that — matching the motor to the actual load and usage pattern usually matters more than chasing the ceiling.
How many people can each boat hold?
The Alumaweld Stryker Inboard 2011 is Coast Guard rated for 5 passengers, while the Alumaweld Stryker Sport 2012 is certified for 5. Note that legal capacity and comfortable capacity aren't always the same thing — on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.
Which boat is wider, and does it affect trailering?
The Alumaweld Stryker Inboard 2011 measures 94" wide, compared to 89" for the Alumaweld Stryker Sport 2012. The US standard-width towing limit is 8’6" (102") in most states — anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.
How do the fuel tanks compare on the Alumaweld Stryker Inboard 2011 and Alumaweld Stryker Sport 2012?
Both boats carry similar fuel loads — 38 gallons and 38 gallons respectively. Range will depend heavily on motor choice, throttle usage, and whether you're on flat lake water or coastal chop.
Are the Alumaweld Stryker Inboard 2011 and Alumaweld Stryker Sport 2012 from the same manufacturer?
Yes — both the Alumaweld Stryker Inboard 2011 and the Alumaweld Stryker Sport 2012 are built by Alumaweld. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.