Both the Alumaweld Intruder Sterndrive 2011 and the Alumaweld Super Vee LT 20 ft. 2013 are modified-V designs, both built in aluminium, so the buying decision usually comes down to a handful of practical questions: how many people are you putting on the water, how far do you trailer, and what does your tow vehicle weigh?
On paper these two are close siblings in the size department - Alumaweld Intruder Sterndrive 2011 at 20,1 ft versus Alumaweld Super Vee LT 20 ft. 2013 at 20,3 ft. Weight tells a clearer story for trailering families: the Alumaweld Intruder Sterndrive 2011 tips the scales at 2 260 lbs - 1 060 lbs more than the Alumaweld Super Vee LT 20 ft. 2013 at 1 200 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.
The power gap is worth calling out. Rated to 225 hp, the Alumaweld Intruder Sterndrive 2011 has a 110-hp advantage over the Alumaweld Super Vee LT 20 ft. 2013's 115-hp ceiling - enough to notice on acceleration and at cruising speed, particularly with a full passenger load. Fuel capacity breaks the other way: the Alumaweld Intruder Sterndrive 2011 carries 60 gallons versus 35 gallons in the Alumaweld Super Vee LT 20 ft. 2013. On a lake day that's negligible, but for coastal cruising or long reservoir runs the extra range matters.
Both boats are rated for 6 passengers - a good fit for a family of four or five plus guests. Comfort at capacity is another matter; the longer hull typically means more seat options and better weight distribution.
Bottom line: Performance buyers should lean toward the Alumaweld Intruder Sterndrive 2011 and its 225-hp ceiling. If fuel economy and quieter running matter more than top-end speed, the Alumaweld Super Vee LT 20 ft. 2013 with its 115-hp rating is the more economical daily driver.