Alumaweld Intruder Sterndrive 2010 boat specs
Alumaweld
Alumaweld Intruder Sterndrive 2010
2010
View full specs →
VS
Alumaweld Stryker V6 2008 boat specs
Alumaweld
Alumaweld Stryker V6 2008
2008
View full specs →

Alumaweld Intruder Sterndrive 2010 vs Alumaweld Stryker V6 2008: A Close Look at Two Modified-V Boats

Both the Alumaweld Intruder Sterndrive 2010 and the Alumaweld Stryker V6 2008 are modified-V designs, both built in aluminium, so the buying decision usually comes down to a handful of practical questions: how many people are you putting on the water, how far do you trailer, and what does your tow vehicle weigh?

On paper these two are close siblings in the size department - Alumaweld Intruder Sterndrive 2010 at 18,2 ft versus Alumaweld Stryker V6 2008 at 19,0 ft. At 1 955 lbs and 2 010 lbs respectively, both sit in a similar weight class - either should pair comfortably with most mid-size SUVs and half-ton trucks, though always confirm your specific tow rating with the motor added.

Both boats share a closely matched power ceiling - 220 hp for the Alumaweld Intruder Sterndrive 2010 and 230 hp for the Alumaweld Stryker V6 2008. Real-world performance will come down more to which motor is actually bolted on, its load at the time, and whether it's a 4-stroke or 2-stroke setup. Fuel capacity breaks the other way: the Alumaweld Intruder Sterndrive 2010 carries 47 gallons versus 36 gallons in the Alumaweld Stryker V6 2008. On a lake day that's negligible, but for coastal cruising or long reservoir runs the extra range matters.

Both boats are rated for 5 passengers - a good fit for a family of four or five plus guests. Comfort at capacity is another matter; the longer hull typically means more seat options and better weight distribution.

Bottom line: The Alumaweld Intruder Sterndrive 2010 and Alumaweld Stryker V6 2008 are closely matched on the specs that matter most. Test-ride both on the water you actually use, check current dealer pricing, and factor in long-term service access before you sign.
General Boat Info
MakeAlumaweld
MakeAlumaweld
ModelIntruder Sterndrive
ModelStryker V6
Model Year2010
Model Year2008
Measurements / Dimensions
Beam89 in. At Chine: 70 in.
Beam85.5 in. At Chine: 66 in.
Beam - Meters2.26
Beam - Meters2.18
Beam - Inches89
Beam - Inches85.5
Deadrise14℃
Deadrise14℃ RMV
Depth - Detail25 in.
Depth - Detail26 in.
Depth - Centimeters63.5
Depth - Centimeters66.04
Depth - Inches25
Depth - Inches26
Weight - Detail1,955 lbs.
Weight - Detail2,010 lbs.
Weight - kg886.77
Weight - kg911.72
Weight - lbs.1955
Weight - lbs.2010
Height - DetailSide: 30 in.
Height - DetailSide: 29 in.
Height - Meters0.76
Height - Meters0.74
Height - Inches30
Height - Inches29
Length - Feet18.17
Length - Feet19
Length overall - Detail18 ft. 2 in.
Length overall - Detail19 ft. 3 in.
Length overall - Meters5.54
Length overall - Meters5.87
Length overall - Inches218
Length overall - Inches231
Length - Inchesnot available
Length - Inches3
Body / Hull
Hull materialAluminum
Hull materialAluminum
Hull thicknessBottom: 0.190 in. Side: 0.125 in.
Hull thicknessBottom: 0.190 in. Side: 0.125 in.
Hull typeModified Vee
Hull typeModified Vee
Engine and Drivetrain
Fuel tank capacity - Detail47 gal.
Fuel tank capacity - Detail36 gal.
Fuel tank capacity - Liters177.91
Fuel tank capacity - Liters136.27
Fuel tank capacity - Gal47
Fuel tank capacity - Gal36
Fuel typeGas
Fuel typeGas
Drive typeInboard
Drive typeJet Drive
Engine max220 hp
Engine max230 hp
Operational Info
Maximum capacity1,300 lbs.
Maximum capacity1,200 lbs.
Maximum people5 at 750 lbs.
Maximum people5 @ 750 lbs.

Alumaweld Intruder Sterndrive 2010 vs Alumaweld Stryker V6 2008 - Common Questions

Which is the larger boat - the Alumaweld Intruder Sterndrive 2010 or the Alumaweld Stryker V6 2008?
The Alumaweld Stryker V6 2008 is the longer of the two at 19,0 feet overall. The Alumaweld Intruder Sterndrive 2010 comes in at 18,2 feet, making it roughly 0,8 ft shorter - a meaningful difference in deck room and overall on-water presence.
Which is easier to trailer - the Alumaweld Intruder Sterndrive 2010 or the Alumaweld Stryker V6 2008?
For trailering, the Alumaweld Intruder Sterndrive 2010 has the edge at 1 955 lbs dry weight versus 2 010 lbs for the Alumaweld Stryker V6 2008. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.
Which boat can handle a bigger outboard?
The Alumaweld Stryker V6 2008 is rated to a maximum of 230 hp, giving it the larger power ceiling. The Alumaweld Intruder Sterndrive 2010 tops out at 220 hp. Keep in mind that maximum ratings are just that - matching the motor to the actual load and usage pattern usually matters more than chasing the ceiling.
How many people can each boat hold?
The Alumaweld Intruder Sterndrive 2010 is Coast Guard rated for 5 passengers, while the Alumaweld Stryker V6 2008 is certified for 5. Note that legal capacity and comfortable capacity aren't always the same thing - on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.
Which boat is wider, and does it affect trailering?
The Alumaweld Intruder Sterndrive 2010 measures 89" wide, compared to 86" for the Alumaweld Stryker V6 2008. The US standard-width towing limit is 8’6" (102") in most states - anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.
Which boat has the larger fuel tank - the Alumaweld Intruder Sterndrive 2010 or the Alumaweld Stryker V6 2008?
The Alumaweld Intruder Sterndrive 2010 has the bigger tank at 47 gallons, versus 36 gallons on the Alumaweld Stryker V6 2008. That 11-gallon difference translates to roughly 33–55 nautical miles of additional range at cruising speed, depending on motor, load, and conditions.
Are the Alumaweld Intruder Sterndrive 2010 and Alumaweld Stryker V6 2008 from the same manufacturer?
Yes - both the Alumaweld Intruder Sterndrive 2010 and the Alumaweld Stryker V6 2008 are built by Alumaweld. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.