Detailed Evaluation & Buyer Recommendation
Alumaweld Intruder Outboard 2010 vs Alumaweld Super Vee LT 20 2008: A Close Look at Two Modified-V Boats
Both the Alumaweld Intruder Outboard 2010 and the Alumaweld Super Vee LT 20 2008 are modified-V designs, both built in aluminium, so the buying decision usually comes down to a handful of practical questions: how many people are you putting on the water, how far do you trailer, and what does your tow vehicle weigh?
On paper these two are close siblings in the size department - Alumaweld Intruder Outboard 2010 at 20,1 ft versus Alumaweld Super Vee LT 20 2008 at 20,0 ft. Weight tells a clearer story for trailering families: the Alumaweld Intruder Outboard 2010 tips the scales at 1 895 lbs - 695 lbs more than the Alumaweld Super Vee LT 20 2008 at 1 200 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.
The power gap is worth calling out. Rated to 200 hp, the Alumaweld Intruder Outboard 2010 has a 85-hp advantage over the Alumaweld Super Vee LT 20 2008's 115-hp ceiling - enough to notice on acceleration and at cruising speed, particularly with a full passenger load. Fuel capacity breaks the other way: the Alumaweld Intruder Outboard 2010 carries 60 gallons versus 35 gallons in the Alumaweld Super Vee LT 20 2008. On a lake day that's negligible, but for coastal cruising or long reservoir runs the extra range matters.
Both boats are rated for 6 passengers - a good fit for a family of four or five plus guests. Comfort at capacity is another matter; the longer hull typically means more seat options and better weight distribution.
Bottom line: Performance buyers should lean toward the Alumaweld Intruder Outboard 2010 and its 200-hp ceiling. If fuel economy and quieter running matter more than top-end speed, the Alumaweld Super Vee LT 20 2008 with its 115-hp rating is the more economical daily driver.
General Boat Info
MakeAlumaweld
MakeAlumaweld
ModelIntruder Outboard
ModelSuper Vee LT 20
Model Year2010
Model Year2008
Measurements / Dimensions
Beam98 in. At Chine: 82 in.
Beam95 in. At Chine: 72 in.
Beam - Meters2.49
Beam - Meters2.41
Beam - Inches98
Beam - Inches95
Deadrise14℃ / 18℃
Deadrise6℃
Depth - Detail27 in.
Depth - Detail25 in.
Depth - Centimeters68.58
Depth - Centimeters63.5
Depth - Inches27
Depth - Inches25
Weight - Detail1,895 lbs.
Weight - Detail1,200 lbs.
Weight - kg859.56
Weight - kg544.31
Weight - lbs.1895
Weight - lbs.1200
Height - DetailSide: 33 in.
Height - DetailSide: 30 in.
Height - Meters0.84
Height - Meters0.76
Height - Inches33
Height - Inches30
Height [transom]20 in. / 25 in.
Height [transom]20 in.
Length - Feet20.08
Length - Feet20
Length overall - Detail20 ft. 1 in.
Length overall - Detail20 ft. 3 in.
Length overall - Meters6.12
Length overall - Meters6.17
Length overall - Inches241
Length overall - Inches243
Length - Inchesnot available
Length - Inches3
Body / Hull
Hull materialAluminum
Hull materialAluminum
Hull thicknessBottom: 0.190 in. Sides: 0.125 in.
Hull thicknessBottom: 0.190 in. Side: 0.125 in.
Hull typeModified Vee
Hull typeModified Vee
Engine and Drivetrain
Fuel tank capacity - Detail60 gal.
Fuel tank capacity - Detail35 gal.
Fuel tank capacity - Liters227.12
Fuel tank capacity - Liters132.49
Fuel tank capacity - Gal60
Fuel tank capacity - Gal35
Drive typeOutboard
Drive typeOutboard
Engine maxProp / Jet: 200 hp
Engine maxProp: 115 hp, 115 hp (tiller) Jet: 80 hp, 105 hp (tiller)
Operational Info
Maximum capacity1,700 lbs.
Maximum capacity1,700 lbs.
Maximum people6 at 900 lbs.
Maximum peoplenot available