When two boats share the same hull type — in this case both the Alumaweld Intruder Outboard 18 2008 and the Alumaweld Talon 17 2008 are modified vee designs with aluminum construction — the buying decision usually comes down to a handful of practical questions: how many people are you putting on the water, how far do you trailer, and what does your tow vehicle weigh?

On paper these two are close siblings in the size department — Alumaweld Intruder Outboard 18 2008 at 18,0 ft versus Alumaweld Talon 17 2008 at 17,0 ft. Weight tells a clearer story for trailering families: the Alumaweld Talon 17 2008 tips the scales at 935 lbs — 803 lbs less than the Alumaweld Intruder Outboard 18 2008 at 132 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.

The power gap is worth calling out. Rated to 115 hp, the Alumaweld Intruder Outboard 18 2008 has a 55-hp advantage over the Alumaweld Talon 17 2008's 60-hp ceiling — enough to notice on acceleration and at cruising speed, particularly with a full passenger load. Fuel capacity breaks the other way: the Alumaweld Intruder Outboard 18 2008 carries 47 gallons versus 18 gallons in the Alumaweld Talon 17 2008. On a lake day that's negligible, but for coastal cruising or long reservoir runs the extra range matters.

Both boats are rated for 4 passengers — a good fit for a family of four or five plus guests. Comfort at capacity is another matter; the longer hull typically means more seat options and better weight distribution.

At this size, power-to-weight ratio matters more than outright horsepower. The Alumaweld Intruder Outboard 18 2008 comes in at 1 lbs per hp versus 16 lbs per hp for the Alumaweld Talon 17 2008. The lower the ratio the more explosive the acceleration — meaningful on a short RIB where bursts of speed, quick planing, and agility in surf or tight waterways define the experience.