Alumaweld Intruder Inboard 2010 boat specs
Alumaweld
Alumaweld Intruder Inboard 2010
2010
View full specs →
VS
Alumaweld Intruder Outboard 2012 boat specs
Alumaweld
Alumaweld Intruder Outboard 2012
2012
View full specs →

Alumaweld Intruder Inboard 2010 vs Alumaweld Intruder Outboard 2012: A Close Look at Two Modified-V Boats

Both the Alumaweld Intruder Inboard 2010 and the Alumaweld Intruder Outboard 2012 are modified-V designs, both built in aluminium, so the buying decision usually comes down to a handful of practical questions: how many people are you putting on the water, how far do you trailer, and what does your tow vehicle weigh?

On paper these two are close siblings in the size department - Alumaweld Intruder Inboard 2010 at 20,1 ft versus Alumaweld Intruder Outboard 2012 at 20,4 ft. Weight tells a clearer story for trailering families: the Alumaweld Intruder Outboard 2012 tips the scales at 1 895 lbs - 135 lbs less than the Alumaweld Intruder Inboard 2010 at 1 760 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.

Both boats share a closely matched power ceiling - 200 hp for the Alumaweld Intruder Inboard 2010 and 200 hp for the Alumaweld Intruder Outboard 2012. Real-world performance will come down more to which motor is actually bolted on, its load at the time, and whether it's a 4-stroke or 2-stroke setup. Both carry nearly identical fuel loads - 60 gal and 60 gal - so range won't be a tiebreaker here.

Both boats are rated for 6 passengers - a good fit for a family of four or five plus guests. Comfort at capacity is another matter; the longer hull typically means more seat options and better weight distribution.

At this size, power-to-weight ratio matters more than outright horsepower. The Alumaweld Intruder Inboard 2010 comes in at 9 lbs per hp versus 10 lbs per hp for the Alumaweld Intruder Outboard 2012. The lower the ratio the more explosive the acceleration - meaningful on a short RIB where bursts of speed, quick planing, and agility in surf or tight waterways define the experience.

The Alumaweld Intruder Inboard 2010 is an inflatable design - lighter, easier to store, and quicker to launch from a beach or dock without a slipway. The Alumaweld Intruder Outboard 2012 is a rigid hull, which typically offers a more confident ride in chop and easier maintenance over the long term.

Bottom line: The Alumaweld Intruder Inboard 2010 and Alumaweld Intruder Outboard 2012 are closely matched on the specs that matter most. Test-ride both on the water you actually use, check current dealer pricing, and factor in long-term service access before you sign.
General Boat Info
MakeAlumaweld
MakeAlumaweld
ModelIntruder Inboard
ModelIntruder Outboard
Model Year2010
Model Year2012
Measurements / Dimensions
Beam98 in. At Chine: 82 in.
Beam99.5 in. At Chine: 82 in.
Beam - Meters2.49
Beam - Meters2.54
Beam - Inches98
Beam - Inches99.5
Deadrise14℃
Deadrise18℃
Depth - Detail25 in.
Depth - Detail29 in.
Depth - Centimeters63.5
Depth - Centimeters73.66
Depth - Inches25
Depth - Inches29
Weight - Detail1,760 lbs.
Weight - Detail1,895 lbs.
Weight - kg798.32
Weight - kg859.56
Weight - lbs.1760
Weight - lbs.1895
Height - DetailSide: 33 in.
Height - DetailSide: 33 in.
Height - Meters0.84
Height - Meters0.84
Height - Inches33
Height - Inches33
Length - Feet20.08
Length - Feet20.42
Length overall - Detail20 ft. 1 in.
Length overall - Detail20 ft. 5 in.
Length overall - Meters6.12
Length overall - Meters6.22
Length overall - Inches241
Length overall - Inches245
Height [transom]not available
Height [transom]25 in.
Body / Hull
Hull materialAluminum
Hull materialAluminum
Hull typeModified Vee
Hull typeModified Vee
Hull thicknessnot available
Hull thicknessBottom: 0.190 in. Sides: 0.125 in. Transom: 0.250 in.
Pontoon and Inflatable Specific
Number of tubesBottom: 0.190 in. Side: 0.125 in.
Number of tubesnot available
Engine and Drivetrain
Fuel tank capacity - Detail60 gal.
Fuel tank capacity - Detail60 gal.
Fuel tank capacity - Liters227.12
Fuel tank capacity - Liters227.12
Fuel tank capacity - Gal60
Fuel tank capacity - Gal60
Fuel typeGas
Fuel typeGas
Drive typeJet Drive
Drive typeOutboard
Engine max200 hp
Engine maxProp / Jet: 200 hp
Operational Info
Maximum capacity1,700 lbs.
Maximum capacity1,700 lbs.
Maximum people6 at 900 lbs.
Maximum people6 / 900 lbs.

Alumaweld Intruder Inboard 2010 vs Alumaweld Intruder Outboard 2012 - Common Questions

Which is the larger boat - the Alumaweld Intruder Inboard 2010 or the Alumaweld Intruder Outboard 2012?
The Alumaweld Intruder Outboard 2012 is the longer of the two at 20,4 feet overall. The Alumaweld Intruder Inboard 2010 comes in at 20,1 feet, making it roughly 0,3 ft shorter - a meaningful difference in deck room and overall on-water presence.
Which is easier to trailer - the Alumaweld Intruder Inboard 2010 or the Alumaweld Intruder Outboard 2012?
For trailering, the Alumaweld Intruder Inboard 2010 has the edge at 1 760 lbs dry weight versus 1 895 lbs for the Alumaweld Intruder Outboard 2012. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.
How many people can each boat hold?
The Alumaweld Intruder Inboard 2010 is Coast Guard rated for 6 passengers, while the Alumaweld Intruder Outboard 2012 is certified for 6. Note that legal capacity and comfortable capacity aren't always the same thing - on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.
Which boat is wider, and does it affect trailering?
The Alumaweld Intruder Outboard 2012 measures 100" wide, compared to 98" for the Alumaweld Intruder Inboard 2010. The US standard-width towing limit is 8’6" (102") in most states - anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.
How do the fuel tanks compare on the Alumaweld Intruder Inboard 2010 and Alumaweld Intruder Outboard 2012?
Both boats carry similar fuel loads - 60 gallons and 60 gallons respectively. Range will depend heavily on motor choice, throttle usage, and whether you're on flat lake water or coastal chop.
Are the Alumaweld Intruder Inboard 2010 and Alumaweld Intruder Outboard 2012 from the same manufacturer?
Yes - both the Alumaweld Intruder Inboard 2010 and the Alumaweld Intruder Outboard 2012 are built by Alumaweld. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.