Alumaweld Free Drifter 2013 boat specs
Alumaweld
Alumaweld Free Drifter 2013
2013
View full specs →
VS
Alumaweld Intruder Inboard 2010 boat specs
Alumaweld
Alumaweld Intruder Inboard 2010
2010
View full specs →

Alumaweld Free Drifter 2013 vs Alumaweld Intruder Inboard 2010 — A Close Look at Two Modified Vees

When two boats share the same hull type — in this case both the Alumaweld Free Drifter 2013 and the Alumaweld Intruder Inboard 2010 are modified vee designs with aluminum construction — the buying decision usually comes down to a handful of practical questions: how many people are you putting on the water, how far do you trailer, and what does your tow vehicle weigh?

On paper these two are close siblings in the size department — Alumaweld Free Drifter 2013 at 18,1 ft versus Alumaweld Intruder Inboard 2010 at 20,1 ft. At 96 lbs and 176 lbs respectively, both sit in a similar weight class — either should pair comfortably with most mid-size SUVs and half-ton trucks, though always confirm your specific tow rating with the motor added.

The power gap is worth calling out. Rated to 200 hp, the Alumaweld Intruder Inboard 2010 has a 85-hp advantage over the Alumaweld Free Drifter 2013's 115-hp ceiling — enough to notice on acceleration and at cruising speed, particularly with a full passenger load. Fuel capacity breaks the other way: the Alumaweld Free Drifter 2013 carries 37 gallons versus 6 gallons in the Alumaweld Intruder Inboard 2010. On a lake day that's negligible, but for coastal cruising or long reservoir runs the extra range matters.

For family outings this is probably the sharpest distinction between the two. The Alumaweld Intruder Inboard 2010 is rated for 6 passengers, while the Alumaweld Free Drifter 2013 caps at 5. If you're regularly pulling extended family or a group of friends onto the water, the extra seats on the Alumaweld Intruder Inboard 2010 could be the deciding factor.

At this size, power-to-weight ratio matters more than outright horsepower. The Alumaweld Free Drifter 2013 comes in at 1 lbs per hp versus 1 lbs per hp for the Alumaweld Intruder Inboard 2010. The lower the ratio the more explosive the acceleration — meaningful on a short RIB where bursts of speed, quick planing, and agility in surf or tight waterways define the experience.

The Alumaweld Intruder Inboard 2010 is an inflatable design — lighter, easier to store, and quicker to launch from a beach or dock without a slipway. The Alumaweld Free Drifter 2013 is a rigid hull, which typically offers a more confident ride in chop and easier maintenance over the long term.

Bottom line: Choose the Alumaweld Intruder Inboard 2010 if your priority is putting more people on the water — it handles 6 passengers and at 20,1 ft it has the deck room to back that rating up comfortably. The Alumaweld Free Drifter 2013 is the smarter pick if you want a lighter, easier-to-trailer boat rated for 5 that costs less to run day-to-day.
General Boat Info
MakeAlumaweld
MakeAlumaweld
ModelFree Drifter
ModelIntruder Inboard
Model Year2013
Model Year201
Measurements / Dimensions
Beam84 in. At Chine: 66 in
Beam98 in. At Chine: 82 in
Beam - Meters2.13
Beam - Meters2.49
Beam - Inches84
Beam - Inches98
Deadrise6℃ with shoe
Deadrise14℃
Depth - Detail24 in
Depth - Detail25 in
Depth - Centimeters60.96
Depth - Centimeters63.5
Depth - Inches24
Depth - Inches25
Weight - Detail960 lbs
Weight - Detail1,760 lbs
Weight - kg435.45
Weight - kg798.32
Weight - lbs.96
Weight - lbs.176
Height - DetailSide: 28 in
Height - DetailSide: 33 in
Height - Meters0.71
Height - Meters0.84
Height - Inches28
Height - Inches33
Height [transom]25 in
Height [transom]not available
Length - Feet18.08
Length - Feet20.08
Length overall - Detail18 ft. 1 in
Length overall - Detail20 ft. 1 in
Length overall - Meters5.51
Length overall - Meters6.12
Length overall - Inches217
Length overall - Inches241
Body / Hull
Hull materialAluminum
Hull materialAluminum
Hull thicknessBottom: 0.160 in. Side: 0.100 in. Transome: 0.125 in
Hull thicknessnot available
Hull typeModified Vee
Hull typeModified Vee
Engine and Drivetrain
Fuel tank capacity - Detail37 gal
Fuel tank capacity - Detail60 gal
Fuel tank capacity - Liters140.06
Fuel tank capacity - Liters227.12
Fuel tank capacity - Gal37
Fuel tank capacity - Gal6
Fuel typeGas
Fuel typeGas
Engine maxProp / Jet (Remote): 115 hp / 80 hp Prop / Jet (Tiller): 75 hp / 80 hp
Engine max200 hp
Drive typenot available
Drive typeJet Drive
Operational Info
Maximum capacity1,200 lbs
Maximum capacity1,700 lbs
Maximum people5 / 750 lbs
Maximum people6 at 900 lbs
Pontoon and Inflatable Specific
Number of tubesnot available
Number of tubesBottom: 0.190 in. Side: 0.125 in

Alumaweld Free Drifter 2013 vs Alumaweld Intruder Inboard 2010 — Common Questions

Which is the larger boat — the Alumaweld Free Drifter 2013 or the Alumaweld Intruder Inboard 2010?
The Alumaweld Intruder Inboard 2010 is the longer of the two at 20,1 feet overall. The Alumaweld Free Drifter 2013 comes in at 18,1 feet, making it roughly 2,0 ft shorter — a meaningful difference in deck room and overall on-water presence.
Which is easier to trailer — the Alumaweld Free Drifter 2013 or the Alumaweld Intruder Inboard 2010?
For trailering, the Alumaweld Free Drifter 2013 has the edge at 96 lbs dry weight versus 176 lbs for the Alumaweld Intruder Inboard 2010. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.
Which boat can handle a bigger outboard?
The Alumaweld Intruder Inboard 2010 is rated to a maximum of 200 hp, giving it the larger power ceiling. The Alumaweld Free Drifter 2013 tops out at 115 hp. Keep in mind that maximum ratings are just that — matching the motor to the actual load and usage pattern usually matters more than chasing the ceiling.
How many people can each boat hold?
The Alumaweld Free Drifter 2013 is Coast Guard rated for 5 passengers, while the Alumaweld Intruder Inboard 2010 is certified for 6. Note that legal capacity and comfortable capacity aren't always the same thing — on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.
Which boat is wider, and does it affect trailering?
The Alumaweld Intruder Inboard 2010 measures 98" wide, compared to 84" for the Alumaweld Free Drifter 2013. The US standard-width towing limit is 8’6" (102") in most states — anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.
Which boat has the larger fuel tank — the Alumaweld Free Drifter 2013 or the Alumaweld Intruder Inboard 2010?
The Alumaweld Free Drifter 2013 has the bigger tank at 37 gallons, versus 6 gallons on the Alumaweld Intruder Inboard 2010. That 31-gallon difference translates to roughly 93–155 nautical miles of additional range at cruising speed, depending on motor, load, and conditions.
Are the Alumaweld Free Drifter 2013 and Alumaweld Intruder Inboard 2010 from the same manufacturer?
Yes — both the Alumaweld Free Drifter 2013 and the Alumaweld Intruder Inboard 2010 are built by Alumaweld. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.