Alumacraft Sierra 1236 2012 boat specs
Alumacraft
Alumacraft Sierra 1236 2012
2012
View full specs →
VS
Alumacraft T14V 2013 boat specs
Alumacraft
Alumacraft T14V 2013
2013
View full specs →

Alumacraft Sierra 1236 2012 vs Alumacraft T14V 2013: Same Brand, Different Boat

The Alumacraft Sierra 1236 2012 is a flat-bottom design and the Alumacraft T14V 2013 is a modified-V design, so you're likely deciding between two noticeably different on-water experiences. Hull type shapes everything from ride quality and fuel burn to dock handling and resale trajectory.

On paper these two are close siblings in the size department - Alumacraft Sierra 1236 2012 at 12,0 ft versus Alumacraft T14V 2013 at 14,0 ft. At 125 lbs and 202 lbs respectively, both sit in a similar weight class - either should pair comfortably with most mid-size SUVs and half-ton trucks, though always confirm your specific tow rating with the motor added.

Both boats share a closely matched power ceiling - 15 hp for the Alumacraft Sierra 1236 2012 and 15 hp for the Alumacraft T14V 2013. Real-world performance will come down more to which motor is actually bolted on, its load at the time, and whether it's a 4-stroke or 2-stroke setup.

For family outings this is probably the sharpest distinction between the two. The Alumacraft T14V 2013 is rated for 4 passengers, while the Alumacraft Sierra 1236 2012 caps at 3. If you're regularly pulling extended family or a group of friends onto the water, the extra seats on the Alumacraft T14V 2013 could be the deciding factor.

At this size, power-to-weight ratio matters more than outright horsepower. The Alumacraft Sierra 1236 2012 comes in at 8 lbs per hp versus 14 lbs per hp for the Alumacraft T14V 2013. The lower the ratio the more explosive the acceleration - meaningful on a short RIB where bursts of speed, quick planing, and agility in surf or tight waterways define the experience.

Bottom line: Choose the Alumacraft T14V 2013 if your priority is putting more people on the water - it handles 4 passengers and at 14,0 ft it has the deck room to back that rating up comfortably. The Alumacraft Sierra 1236 2012 is the smarter pick if you want a lighter, easier-to-trailer boat rated for 3 that costs less to run day-to-day.
General Boat Info
MakeAlumacraft
MakeAlumacraft
ModelSierra 1236
ModelT14V
Model Year2012
Model Year2013
Measurements / Dimensions
Beam55 in.
Beam61 in. (1.52 m)
Beam - Meters1.4
Beam - Meters1.55
Beam - Inches55
Beam - Inches61
Weight - Detail125 lbs.
Weight - Detail202 lbs. (92 kg)
Weight - kg56.7
Weight - kg91.63
Weight - lbs.125
Weight - lbs.202
Height - DetailSide: 19 in.
Height - Detail26 in. (0.66 m) bow
Height - Meters0.48
Height - Meters0.66
Height - Inches19
Height - Inches26
Height [transom]15 in.
Height [transom]15 in. (0.38 m)
Length - Feet12
Length - Feet14
Length overall - Detail12 ft.
Length overall - Detail14 ft. (4.2 m)
Length overall - Meters3.66
Length overall - Meters4.27
Length overall - Inches144
Length overall - Inches168
Width [transom] - Detailnot available
Width [transom] - Detail60 in. (1.52 m)
Body / Hull
Hull materialAluminum
Hull materialAluminum
Hull thickness0.053 in.
Hull thickness0.060 in. (1.52 mm) bottom 0.050 in. (1.27 mm) sides
Hull typeFlat
Hull typeModified Vee
Engine and Drivetrain
Fuel typeGas
Fuel typeGas
Drive typeOutboard
Drive typeOutboard
Horsepower15 hp
Horsepowernot available
Engine maxnot available
Engine max15 hp (11 kW)
Operational Info
Maximum capacity540 lbs.
Maximum capacity825 lbs. (374 kg)
Maximum people3
Maximum people4

Alumacraft Sierra 1236 2012 vs Alumacraft T14V 2013 - Common Questions

Which is the larger boat - the Alumacraft Sierra 1236 2012 or the Alumacraft T14V 2013?
The Alumacraft T14V 2013 is the longer of the two at 14,0 feet overall. The Alumacraft Sierra 1236 2012 comes in at 12,0 feet, making it roughly 2,0 ft shorter - a meaningful difference in deck room and overall on-water presence.
Which is easier to trailer - the Alumacraft Sierra 1236 2012 or the Alumacraft T14V 2013?
For trailering, the Alumacraft Sierra 1236 2012 has the edge at 125 lbs dry weight versus 202 lbs for the Alumacraft T14V 2013. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.
How many people can each boat hold?
The Alumacraft Sierra 1236 2012 is Coast Guard rated for 3 passengers, while the Alumacraft T14V 2013 is certified for 4. Note that legal capacity and comfortable capacity aren't always the same thing - on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.
Which boat has the better power-to-weight ratio?
The Alumacraft Sierra 1236 2012 has a better power-to-weight ratio at 8 lbs per hp compared to 14 lbs per hp for the Alumacraft T14V 2013. A lower number means quicker acceleration and faster time to plane - the number that actually matters most on short, sporty boats like these.
Which boat is wider, and does it affect trailering?
The Alumacraft T14V 2013 measures 61" wide, compared to 55" for the Alumacraft Sierra 1236 2012. The US standard-width towing limit is 8’6" (102") in most states - anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.
Are the Alumacraft Sierra 1236 2012 and Alumacraft T14V 2013 from the same manufacturer?
Yes - both the Alumacraft Sierra 1236 2012 and the Alumacraft T14V 2013 are built by Alumacraft. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.