Alumacraft Sierra 1236 2012 boat specs
Alumacraft
Alumacraft Sierra 1236 2012
2012
View full specs →
VS
Alumacraft T12V 2009 boat specs
Alumacraft
Alumacraft T12V 2009
2009
View full specs →

Alumacraft Sierra 1236 2012 vs Alumacraft T12V 2009: Same Brand, Different Boat

The spec sheets list the Alumacraft Sierra 1236 2012 as flat and the Alumacraft T12V 2009 as other, so check how each hull rides in the conditions you use before you decide.

On paper these two are close siblings in the size department - Alumacraft Sierra 1236 2012 at 12,0 ft versus Alumacraft T12V 2009 at 12,0 ft. At 125 lbs and 160 lbs respectively, both sit in a similar weight class - either should pair comfortably with most mid-size SUVs and half-ton trucks, though always confirm your specific tow rating with the motor added.

Both boats share a closely matched power ceiling - 15 hp for the Alumacraft Sierra 1236 2012 and 10 hp for the Alumacraft T12V 2009. Real-world performance will come down more to which motor is actually bolted on, its load at the time, and whether it's a 4-stroke or 2-stroke setup.

Both boats are rated for 3 passengers - a good fit for a family of four or five plus guests. Comfort at capacity is another matter; the longer hull typically means more seat options and better weight distribution.

At this size, power-to-weight ratio matters more than outright horsepower. The Alumacraft Sierra 1236 2012 comes in at 8 lbs per hp versus 16 lbs per hp for the Alumacraft T12V 2009. The lower the ratio the more explosive the acceleration - meaningful on a short RIB where bursts of speed, quick planing, and agility in surf or tight waterways define the experience.

Bottom line: The Alumacraft Sierra 1236 2012 and Alumacraft T12V 2009 are closely matched on the specs that matter most. Test-ride both on the water you actually use, check current dealer pricing, and factor in long-term service access before you sign.
General Boat Info
MakeAlumacraft
MakeAlumacraft
ModelSierra 1236
ModelT12V
Model Year2012
Model Year2009
Measurements / Dimensions
Beam55 in.
Beam60 in. (1.52 m)
Beam - Meters1.4
Beam - Meters1.52
Beam - Inches55
Beam - Inches60
Weight - Detail125 lbs.
Weight - Detail160 lbs. (73 kg)
Weight - kg56.7
Weight - kg72.57
Weight - lbs.125
Weight - lbs.160
Height - DetailSide: 19 in.
Height - Detail25 in. (0.64 m)
Height - Meters0.48
Height - Meters0.64
Height - Inches19
Height - Inches25
Height [transom]15 in.
Height [transom]15 in. (0.38 m)
Length - Feet12
Length - Feet12
Length overall - Detail12 ft.
Length overall - Detail12 ft. 2 in. (3.7 m)
Length overall - Meters3.66
Length overall - Meters3.71
Length overall - Inches144
Length overall - Inches146
Width [transom] - Detailnot available
Width [transom] - Detail60 in. (1.52 m)
Length - Metersnot available
Length - Meters3.7
Length - Inchesnot available
Length - Inches2
Body / Hull
Hull materialAluminum
Hull materialAluminum
Hull thickness0.053 in.
Hull thicknessFull Vee Hull: Bottom-0.060 in. (1.52 mm) Sides-0.050 in. (1.27 mm)
Hull typeFlat
Hull typeOther
Engine and Drivetrain
Fuel typeGas
Fuel typeGas
Drive typeOutboard
Drive typeOutboard
Horsepower15 hp
Horsepowernot available
Engine maxnot available
Engine max10 hp (7 kW)
Operational Info
Maximum capacity540 lbs.
Maximum capacity655 lbs. (297 kg)
Maximum people3
Maximum people3

Alumacraft Sierra 1236 2012 vs Alumacraft T12V 2009 - Common Questions

Which is the larger boat - the Alumacraft Sierra 1236 2012 or the Alumacraft T12V 2009?
The Alumacraft T12V 2009 is the longer of the two at 12,0 feet overall. The Alumacraft Sierra 1236 2012 comes in at 12,0 feet, making it roughly 0,0 ft shorter - a meaningful difference in deck room and overall on-water presence.
Which is easier to trailer - the Alumacraft Sierra 1236 2012 or the Alumacraft T12V 2009?
For trailering, the Alumacraft Sierra 1236 2012 has the edge at 125 lbs dry weight versus 160 lbs for the Alumacraft T12V 2009. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.
How many people can each boat hold?
The Alumacraft Sierra 1236 2012 is Coast Guard rated for 3 passengers, while the Alumacraft T12V 2009 is certified for 3. Note that legal capacity and comfortable capacity aren't always the same thing - on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.
Which boat has the better power-to-weight ratio?
The Alumacraft Sierra 1236 2012 has a better power-to-weight ratio at 8 lbs per hp compared to 16 lbs per hp for the Alumacraft T12V 2009. A lower number means quicker acceleration and faster time to plane - the number that actually matters most on short, sporty boats like these.
Which boat is wider, and does it affect trailering?
The Alumacraft T12V 2009 measures 60" wide, compared to 55" for the Alumacraft Sierra 1236 2012. The US standard-width towing limit is 8’6" (102") in most states - anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.
Are the Alumacraft Sierra 1236 2012 and Alumacraft T12V 2009 from the same manufacturer?
Yes - both the Alumacraft Sierra 1236 2012 and the Alumacraft T12V 2009 are built by Alumacraft. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.