Alumacraft Riveted Jon MV 1648 (15 & 20) 2012 boat specs
Alumacraft
Alumacraft Riveted Jon MV 1648 (15 & 20) 2012
2012
View full specs →
VS
Alumacraft V16 2008 boat specs
Alumacraft
Alumacraft V16 2008
2008
View full specs →

Alumacraft Riveted Jon MV 1648 (15 & 20) 2012 vs Alumacraft V16 2008: Same Brand, Different Boat

The spec sheets list the Alumacraft Riveted Jon MV 1648 (15 & 20) 2012 as modified vee and the Alumacraft V16 2008 as other, so check how each hull rides in the conditions you use before you decide.

On paper these two are close siblings in the size department - Alumacraft Riveted Jon MV 1648 (15 & 20) 2012 at 16,0 ft versus Alumacraft V16 2008 at 16,0 ft. At 280 lbs and 310 lbs respectively, both sit in a similar weight class - either should pair comfortably with most mid-size SUVs and half-ton trucks, though always confirm your specific tow rating with the motor added.

Both boats share a closely matched power ceiling - 30 hp for the Alumacraft Riveted Jon MV 1648 (15 & 20) 2012 and 25 hp for the Alumacraft V16 2008. Real-world performance will come down more to which motor is actually bolted on, its load at the time, and whether it's a 4-stroke or 2-stroke setup.

Both boats are rated for 5 passengers - a good fit for a family of four or five plus guests. Comfort at capacity is another matter; the longer hull typically means more seat options and better weight distribution.

At this size, power-to-weight ratio matters more than outright horsepower. The Alumacraft Riveted Jon MV 1648 (15 & 20) 2012 comes in at 9 lbs per hp versus 12 lbs per hp for the Alumacraft V16 2008. The lower the ratio the more explosive the acceleration - meaningful on a short RIB where bursts of speed, quick planing, and agility in surf or tight waterways define the experience.

Bottom line: The Alumacraft Riveted Jon MV 1648 (15 & 20) 2012 and Alumacraft V16 2008 are closely matched on the specs that matter most. Test-ride both on the water you actually use, check current dealer pricing, and factor in long-term service access before you sign.
General Boat Info
MakeAlumacraft
MakeAlumacraft
ModelRiveted Jon MV 1648 (15 & 20)
ModelV16
Model Year2012
Model Year2008
Measurements / Dimensions
Beam70 in.
Beam70 in. (1.78 m)
Beam - Meters1.78
Beam - Meters1.78
Beam - Inches70
Beam - Inches70
Weight - Detail280 lbs.
Weight - Detail310 lbs. (140 kg)
Weight - kg127.01
Weight - kg140.61
Weight - lbs.280
Weight - lbs.310
Height - Detail21 in.
Height - Detail30 in. (0.76 m)
Height - Meters0.53
Height - Meters0.76
Height - Inches21
Height - Inches30
Height [transom]15 / 20 in.
Height [transom]20 in. (0.51 m)
Length - Feet16
Length - Feet16
Length overall - Detail16 ft.
Length overall - Detail16 ft. 9 in. (5.1 m)
Length overall - Meters4.88
Length overall - Meters5.11
Length overall - Inches192
Length overall - Inches201
Width [transom] - Detailnot available
Width [transom] - Detail62 in. (1.58 m)
Length - Metersnot available
Length - Meters5.1
Length - Inchesnot available
Length - Inches9
Body / Hull
Hull materialAluminum
Hull materialAluminum
Hull thickness0.070 in.
Hull thicknessFull Vee Hull-0.065 in. (1.65 mm)
Hull typeModified Vee
Hull typeOther
Engine and Drivetrain
Fuel typeGas
Fuel typeGas
Drive typeOutboard
Drive typeOutboard
Engine max30 hp
Engine max25 hp (18 kW)
Operational Info
Maximum capacity1,010 lbs.
Maximum capacity1,380 lbs. (626 kg)
Maximum people5
Maximum people5

Alumacraft Riveted Jon MV 1648 (15 & 20) 2012 vs Alumacraft V16 2008 - Common Questions

Which is the larger boat - the Alumacraft Riveted Jon MV 1648 (15 & 20) 2012 or the Alumacraft V16 2008?
The Alumacraft V16 2008 is the longer of the two at 16,0 feet overall. The Alumacraft Riveted Jon MV 1648 (15 & 20) 2012 comes in at 16,0 feet, making it roughly 0,0 ft shorter - a meaningful difference in deck room and overall on-water presence.
Which is easier to trailer - the Alumacraft Riveted Jon MV 1648 (15 & 20) 2012 or the Alumacraft V16 2008?
For trailering, the Alumacraft Riveted Jon MV 1648 (15 & 20) 2012 has the edge at 280 lbs dry weight versus 310 lbs for the Alumacraft V16 2008. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.
How many people can each boat hold?
The Alumacraft Riveted Jon MV 1648 (15 & 20) 2012 is Coast Guard rated for 5 passengers, while the Alumacraft V16 2008 is certified for 5. Note that legal capacity and comfortable capacity aren't always the same thing - on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.
Which boat has the better power-to-weight ratio?
The Alumacraft Riveted Jon MV 1648 (15 & 20) 2012 has a better power-to-weight ratio at 9 lbs per hp compared to 12 lbs per hp for the Alumacraft V16 2008. A lower number means quicker acceleration and faster time to plane - the number that actually matters most on short, sporty boats like these.
Do these boats require an oversize trailer permit to tow on US highways?
Both the Alumacraft Riveted Jon MV 1648 (15 & 20) 2012 and Alumacraft V16 2008 share an 70 in. beam - meaning both sit right at the 8’6" threshold that most US states use for standard-width loads. In most states you can tow at that width without a special permit, but regulations vary. Always check the rules for your state and any states you'll be passing through before your first long haul.
Are the Alumacraft Riveted Jon MV 1648 (15 & 20) 2012 and Alumacraft V16 2008 from the same manufacturer?
Yes - both the Alumacraft Riveted Jon MV 1648 (15 & 20) 2012 and the Alumacraft V16 2008 are built by Alumacraft. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.