The spec sheets list the Alumacraft Riveted Jon 1436 LT 2011 as flat and the Alumacraft T12V 2010 as other, so check how each hull rides in the conditions you use before you decide.
On paper these two are close siblings in the size department - Alumacraft Riveted Jon 1436 LT 2011 at 14,0 ft versus Alumacraft T12V 2010 at 12,2 ft. At 135 lbs and 160 lbs respectively, both sit in a similar weight class - either should pair comfortably with most mid-size SUVs and half-ton trucks, though always confirm your specific tow rating with the motor added.
Both boats share a closely matched power ceiling - 15 hp for the Alumacraft Riveted Jon 1436 LT 2011 and 10 hp for the Alumacraft T12V 2010. Real-world performance will come down more to which motor is actually bolted on, its load at the time, and whether it's a 4-stroke or 2-stroke setup.
Both boats are rated for 3 passengers - a good fit for a family of four or five plus guests. Comfort at capacity is another matter; the longer hull typically means more seat options and better weight distribution.
At this size, power-to-weight ratio matters more than outright horsepower. The Alumacraft Riveted Jon 1436 LT 2011 comes in at 9 lbs per hp versus 16 lbs per hp for the Alumacraft T12V 2010. The lower the ratio the more explosive the acceleration - meaningful on a short RIB where bursts of speed, quick planing, and agility in surf or tight waterways define the experience.
Bottom line: The Alumacraft Riveted Jon 1436 LT 2011 and Alumacraft T12V 2010 are closely matched on the specs that matter most. Test-ride both on the water you actually use, check current dealer pricing, and factor in long-term service access before you sign.