When two boats share the same hull type — in this case both the Alumacraft Pro 175 2009 and the Alumacraft Vs and Ts V-16 (20 in.) 2011 are modified vee designs with aluminum construction — the buying decision usually comes down to a handful of practical questions: how many people are you putting on the water, how far do you trailer, and what does your tow vehicle weigh?

On paper these two are close siblings in the size department — Alumacraft Pro 175 2009 at 17,0 ft versus Alumacraft Vs and Ts V-16 (20 in.) 2011 at 16,6 ft. Weight tells a clearer story for trailering families: the Alumacraft Vs and Ts V-16 (20 in.) 2011 tips the scales at 285 lbs — 273 lbs less than the Alumacraft Pro 175 2009 at 12 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.

The power gap is worth calling out. Rated to 90 hp, the Alumacraft Pro 175 2009 has a 65-hp advantage over the Alumacraft Vs and Ts V-16 (20 in.) 2011's 25-hp ceiling — enough to notice on acceleration and at cruising speed, particularly with a full passenger load.

For family outings this is probably the sharpest distinction between the two. The Alumacraft Vs and Ts V-16 (20 in.) 2011 is rated for 5 passengers, while the Alumacraft Pro 175 2009 caps at 4. If you're regularly pulling extended family or a group of friends onto the water, the extra seats on the Alumacraft Vs and Ts V-16 (20 in.) 2011 could be the deciding factor.

At this size, power-to-weight ratio matters more than outright horsepower. The Alumacraft Pro 175 2009 comes in at 0 lbs per hp versus 11 lbs per hp for the Alumacraft Vs and Ts V-16 (20 in.) 2011. The lower the ratio the more explosive the acceleration — meaningful on a short RIB where bursts of speed, quick planing, and agility in surf or tight waterways define the experience.