Detailed Evaluation & Buyer Recommendation
Alumacraft PF170 2006 vs Alumacraft Pro 175 2013: Same Brand, Different Boat
The Alumacraft PF170 2006 is a modified-V design and the Alumacraft Pro 175 2013 is a flat-bottom design, so you're likely deciding between two noticeably different on-water experiences. Hull type shapes everything from ride quality and fuel burn to dock handling and resale trajectory.
On paper these two are close siblings in the size department - Alumacraft PF170 2006 at 17,0 ft versus Alumacraft Pro 175 2013 at 17,4 ft. Weight tells a clearer story for trailering families: the Alumacraft Pro 175 2013 tips the scales at 1 075 lbs - 275 lbs less than the Alumacraft PF170 2006 at 800 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.
The power gap is worth calling out. Rated to 90 hp, the Alumacraft Pro 175 2013 has a 30-hp advantage over the Alumacraft PF170 2006's 60-hp ceiling - enough to notice on acceleration and at cruising speed, particularly with a full passenger load.
Both boats are rated for 4 passengers - a good fit for a family of four or five plus guests. Comfort at capacity is another matter; the longer hull typically means more seat options and better weight distribution.
At this size, power-to-weight ratio matters more than outright horsepower. The Alumacraft Pro 175 2013 comes in at 12 lbs per hp versus 13 lbs per hp for the Alumacraft PF170 2006. The lower the ratio the more explosive the acceleration - meaningful on a short RIB where bursts of speed, quick planing, and agility in surf or tight waterways define the experience.
Bottom line: Performance buyers should lean toward the Alumacraft Pro 175 2013 and its 90-hp ceiling. If fuel economy and quieter running matter more than top-end speed, the Alumacraft PF170 2006 with its 60-hp rating is the more economical daily driver.
General Boat Info
MakeAlumacraft
MakeAlumacraft
Model Year2006
Model Year2013
Measurements / Dimensions
Beam74 in. (1.88 m) Bottom: 52 in. (1.32 m)
Beam84 / 56 in. (2.13 / 1.42 m)
Beam - Meters1.88
Beam - Meters1.42
Beam - Inches74
Beam - Inches56
Weight - Detail800 lbs. (363 kg)
Weight - Detail1,075 lbs. (488 kg)
Weight - kg362.87
Weight - kg487.61
Weight - lbs.800
Weight - lbs.1075
Width [transom] - Detail74 in. (1.88 m)
Width [transom] - Detail84 in. (2.13 m)
Height - Detail22 in. (.56 m)
Height - Detailnot available
Height - Meters0.56
Height - Metersnot available
Height - Inches22
Height - Inchesnot available
Height [transom]22 in. (.56 m)
Height [transom]21 in. (0.53 m)
Length - Meters5.18
Length - Metersnot available
Length - Feet17
Length - Feet17.42
Length overall - Detail17 ft. 0 in. (5.18 m)
Length overall - Detail17 ft. 5 in. (5.3 m)
Length overall - Meters5.18
Length overall - Meters5.31
Length overall - Inches204
Length overall - Inches209
Depth - Detailnot available
Depth - Detail23 in. (0.58 m) side height
Depth - Centimetersnot available
Depth - Centimeters58.42
Depth - Inchesnot available
Depth - Inches23
Body / Hull
Hull materialAluminum
Hull materialAluminum
Hull thicknessBottom/sides: .102 in. (2.5 mm)
Hull thickness0.102 in. (2.6 mm)
Hull typeModified Vee
Hull typeFlat
Engine and Drivetrain
Drive typeOutboard
Drive typeOutboard
Engine max60 hp (45 kw)
Engine max90 hp (67 kW)
Fuel tank capacity - Detailnot available
Fuel tank capacity - Detail20 gal. (76 l)
Fuel tank capacity - Litersnot available
Fuel tank capacity - Liters75.71
Fuel tank capacity - Galnot available
Fuel tank capacity - Gal20
Operational Info
Maximum capacity900 lbs. (408 kg)
Maximum capacity1,200 lbs. (544 kg)
Maximum people4
Maximum people4
Storagenot available
StorageBow & Aft Livewell: 20 gal. (76 l)