Alumacraft Navigator 175 Tiller 2010 boat specs
Alumacraft
Alumacraft Navigator 175 Tiller 2010
2010
View full specs →
VS
Alumacraft Riveted Jon 1036 2011 boat specs
Alumacraft
Alumacraft Riveted Jon 1036 2011
2011
View full specs →

Alumacraft Navigator 175 Tiller 2010 vs Alumacraft Riveted Jon 1036 2011: Same Brand, Different Boat

The Alumacraft Navigator 175 Tiller 2010 is a deep-V design and the Alumacraft Riveted Jon 1036 2011 is a flat-bottom design, so you're likely deciding between two noticeably different on-water experiences. Hull type shapes everything from ride quality and fuel burn to dock handling and resale trajectory.

Size is the most obvious dividing line here. The Alumacraft Navigator 175 Tiller 2010 measures 17,7 feet overall (2010), giving it roughly 7,7 additional feet of deck space compared to the Alumacraft Riveted Jon 1036 2011 at 10,0 feet (2011). Weight tells a clearer story for trailering families: the Alumacraft Navigator 175 Tiller 2010 tips the scales at 1 145 lbs - 1 040 lbs more than the Alumacraft Riveted Jon 1036 2011 at 105 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.

The power gap is worth calling out. Rated to 75 hp, the Alumacraft Navigator 175 Tiller 2010 has a 72-hp advantage over the Alumacraft Riveted Jon 1036 2011's 3-hp ceiling - enough to notice on acceleration and at cruising speed, particularly with a full passenger load.

For family outings this is probably the sharpest distinction between the two. The Alumacraft Navigator 175 Tiller 2010 is rated for 5 passengers, while the Alumacraft Riveted Jon 1036 2011 caps at 3. If you're regularly pulling extended family or a group of friends onto the water, the extra seats on the Alumacraft Navigator 175 Tiller 2010 could be the deciding factor.

At this size, power-to-weight ratio matters more than outright horsepower. The Alumacraft Navigator 175 Tiller 2010 comes in at 15 lbs per hp versus 35 lbs per hp for the Alumacraft Riveted Jon 1036 2011. The lower the ratio the more explosive the acceleration - meaningful on a short RIB where bursts of speed, quick planing, and agility in surf or tight waterways define the experience.

Bottom line: Choose the Alumacraft Navigator 175 Tiller 2010 if your priority is putting more people on the water - it handles 5 passengers and at 17,7 ft it has the deck room to back that rating up comfortably. The Alumacraft Riveted Jon 1036 2011 is the smarter pick if you want a lighter, easier-to-trailer boat rated for 3 that costs less to run day-to-day.
General Boat Info
MakeAlumacraft
MakeAlumacraft
ModelNavigator 175 Tiller
ModelRiveted Jon 1036
Model Year2010
Model Year2011
Measurements / Dimensions
Beam95 in. (2.41 m)
Beam55 in.
Beam - Meters2.41
Beam - Meters1.4
Beam - Inches95
Beam - Inches55
Depth - DetailMaximum: 42 in. (1.09 m) To Floor: 23 in. (0.58 m)
Depth - Detailnot available
Depth - Centimeters106.68
Depth - Centimetersnot available
Depth - Inches42
Depth - Inchesnot available
Weight - Detail1,145 lbs. (519 kg)
Weight - Detail105 lbs.
Weight - kg519.36
Weight - kg47.63
Weight - lbs.1145
Weight - lbs.105
Width [transom] - Detail93 in. (2.36 m)
Width [transom] - Detailnot available
Height [transom]20 in. (0.63 m)
Height [transom]15 in.
Length - Meters5.38
Length - Metersnot available
Length - Feet17.67
Length - Feet10
Length overall - Detail17 ft. 8 in. (5.38 m)
Length overall - Detail10 ft. 0 in.
Length overall - Meters5.38
Length overall - Meters3.05
Length overall - Inches212
Length overall - Inches120
Height - Detailnot available
Height - Detail19 in.
Height - Metersnot available
Height - Meters0.48
Height - Inchesnot available
Height - Inches19
Body / Hull
Hull materialAluminum
Hull materialAluminum
Hull thicknessBottom: 0.080 in. (2 mm)
Hull thickness0.053 in.
Hull typeDeep Vee
Hull typeFlat
Engine and Drivetrain
Fuel tank capacity - Detail38 gal. (144 l)
Fuel tank capacity - Detailnot available
Fuel tank capacity - Liters143.85
Fuel tank capacity - Litersnot available
Fuel tank capacity - Gal38
Fuel tank capacity - Galnot available
Fuel typeGas
Fuel typeGas
Drive typeOutboard
Drive typeOutboard
Engine max75 hp (56 kW)
Engine max3 hp
Operational Info
Maximum capacity1,145 lbs. (519 kg)
Maximum capacity365 lbs.
Maximum people5
Maximum people3

Alumacraft Navigator 175 Tiller 2010 vs Alumacraft Riveted Jon 1036 2011 - Common Questions

Which is the larger boat - the Alumacraft Navigator 175 Tiller 2010 or the Alumacraft Riveted Jon 1036 2011?
The Alumacraft Navigator 175 Tiller 2010 is the longer of the two at 17,7 feet overall. The Alumacraft Riveted Jon 1036 2011 comes in at 10,0 feet, making it roughly 7,7 ft shorter - a meaningful difference in deck room and overall on-water presence.
Which is easier to trailer - the Alumacraft Navigator 175 Tiller 2010 or the Alumacraft Riveted Jon 1036 2011?
For trailering, the Alumacraft Riveted Jon 1036 2011 has the edge at 105 lbs dry weight versus 1 145 lbs for the Alumacraft Navigator 175 Tiller 2010. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.
Which boat can handle a bigger outboard?
The Alumacraft Navigator 175 Tiller 2010 is rated to a maximum of 75 hp, giving it the larger power ceiling. The Alumacraft Riveted Jon 1036 2011 tops out at 3 hp. Keep in mind that maximum ratings are just that - matching the motor to the actual load and usage pattern usually matters more than chasing the ceiling.
How many people can each boat hold?
The Alumacraft Navigator 175 Tiller 2010 is Coast Guard rated for 5 passengers, while the Alumacraft Riveted Jon 1036 2011 is certified for 3. Note that legal capacity and comfortable capacity aren't always the same thing - on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.
Which boat has the better power-to-weight ratio?
The Alumacraft Navigator 175 Tiller 2010 has a better power-to-weight ratio at 15 lbs per hp compared to 35 lbs per hp for the Alumacraft Riveted Jon 1036 2011. A lower number means quicker acceleration and faster time to plane - the number that actually matters most on short, sporty boats like these.
Which boat is wider, and does it affect trailering?
The Alumacraft Navigator 175 Tiller 2010 measures 95" wide, compared to 55" for the Alumacraft Riveted Jon 1036 2011. The US standard-width towing limit is 8’6" (102") in most states - anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.
Are the Alumacraft Navigator 175 Tiller 2010 and Alumacraft Riveted Jon 1036 2011 from the same manufacturer?
Yes - both the Alumacraft Navigator 175 Tiller 2010 and the Alumacraft Riveted Jon 1036 2011 are built by Alumacraft. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.