Alumacraft Navigator 165 2000 vs Alumacraft PF 175 2013 - Boat Spec Comparison

Q: Which is easier to trailer — the Alumacraft Navigator 165 2000 or the Alumacraft PF 175 2013?

For trailering, the Alumacraft Navigator 165 2000 has the edge at 82 lbs dry weight versus 1 085 lbs for the Alumacraft PF 175 2013. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.

Q: What is the maximum horsepower rating for these boats?

The Alumacraft PF 175 2013 has a documented max rating of 90 hp. Engine specifications for the Alumacraft Navigator 165 2000 were not available in our database — check the OEM spec sheet or manufacturer's website for confirmation.

Q: How many people can each boat hold?

The Alumacraft Navigator 165 2000 is Coast Guard rated for 5 passengers, while the Alumacraft PF 175 2013 is certified for 4. Note that legal capacity and comfortable capacity aren't always the same thing — on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.

Q: Which boat is wider, and does it affect trailering?

The Alumacraft Navigator 165 2000 measures 82" wide, compared to 56" for the Alumacraft PF 175 2013. The US standard-width towing limit is 8’6" (102") in most states — anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.

Q: Which boat has the larger fuel tank — the Alumacraft Navigator 165 2000 or the Alumacraft PF 175 2013?

The Alumacraft Navigator 165 2000 has the bigger tank at 22 gallons, versus 2 gallons on the Alumacraft PF 175 2013. That 20-gallon difference translates to roughly 60–100 nautical miles of additional range at cruising speed, depending on motor, load, and conditions.

Q: Are the Alumacraft Navigator 165 2000 and Alumacraft PF 175 2013 from the same manufacturer?

Yes — both the Alumacraft Navigator 165 2000 and the Alumacraft PF 175 2013 are built by Alumacraft. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.

Boat Comparison

Alumacraft Navigator 165 2000 vs Alumacraft PF 175 2013

Alumacraft

Alumacraft Navigator 165 2000

2000

View full specs →

Alumacraft

Alumacraft PF 175 2013

2013

View full specs →

Detailed Evaluation & Buyer Recommendation

Alumacraft Navigator 165 2000 vs Alumacraft PF 175 2013 — Same Brand, Different Boat

The Alumacraft Navigator 165 2000 vs Alumacraft PF 175 2013 comparison sits squarely in the category of decisions where specs alone won't tell the whole story — intended use, storage, and long-term ownership costs all factor in.

The Alumacraft PF 175 2013 tops out at 90 hp. Engine specs for the Alumacraft Navigator 165 2000 aren't listed — confirm with a dealer before selecting an outboard.Fuel capacity breaks the other way: the Alumacraft Navigator 165 2000 carries 22 gallons versus 2 gallons in the Alumacraft PF 175 2013. On a lake day that's negligible, but for coastal cruising or long reservoir runs the extra range matters.

For family outings this is probably the sharpest distinction between the two. The Alumacraft Navigator 165 2000 is rated for 5 passengers, while the Alumacraft PF 175 2013 caps at 4. If you're regularly pulling extended family or a group of friends onto the water, the extra seats on the Alumacraft Navigator 165 2000 could be the deciding factor.

Bottom line: Choose the Alumacraft Navigator 165 2000 if your priority is putting more people on the water — it handles 5 passengers and at 0,0 ft it has the deck room to back that rating up comfortably. The Alumacraft PF 175 2013 is the smarter pick if you want a lighter, easier-to-trailer boat rated for 4 that costs less to run day-to-day.

General Boat Info

MakeAlumacraft

ModelNavigator 165

ModelPF 175

Model Year2

Model Year2013

Measurements / Dimensions

Beam82"

Beam84 / 56 in. (2.13 / 1.42 m)

Beam - Meters2.08

Beam - Meters1.42

Beam - Inches82

Beam - Inches56

Weight - Detail820 lbs

Weight - Detail1,085 lbs. (492 kg)

Weight - kg371.95

Weight - kg492.15

Weight - lbs.82

Weight - lbs.1085

Length overall - Detail16' 5"

Length overall - Detail17 ft. 5 in. (5.3 m)

Length overall - Meters4.88

Length overall - Meters5.31

Length overall - Inches192

Length overall - Inches209

Depth - Detailnot available

Depth - Detail23 in. (0.58 m) side height

Depth - Centimetersnot available

Depth - Centimeters58.42

Depth - Inchesnot available

Depth - Inches23

Width [transom] - Detailnot available

Width [transom] - Detail84 in. (2.13 m)

Height [transom]not available

Height [transom]21 in. (0.53 m)

Length - Feetnot available

Length - Feet17.42

Body / Hull

Hull materialAluminum

Hull thicknessnot available

Hull thickness0.102 in. (2.6 mm)

Hull typenot available

Hull typeFlat

Engine and Drivetrain

Engine/s standard35 - 60hp

Engine/s standardnot available

Fuel tank capacity - Detail22 gallons

Fuel tank capacity - Detail20 gal. (76 l)

Fuel tank capacity - Liters83.28

Fuel tank capacity - Liters75.71

Fuel tank capacity - Gal22

Fuel tank capacity - Gal2

Fuel typenot available

Fuel typeGas

Drive typenot available

Drive typeOutboard

Engine maxnot available

Engine max90 hp (67 kW)

Operational Info

Maximum people5 person

Maximum people4

Storagenot available

StorageBow & Aft Livewell: 20 gal. (76 l)

Maximum capacitynot available

Maximum capacity1,180 lbs. (535 kg)

Alumacraft Navigator 165 2000 vs Alumacraft PF 175 2013 — Common Questions

Which is easier to trailer — the Alumacraft Navigator 165 2000 or the Alumacraft PF 175 2013?

For trailering, the Alumacraft Navigator 165 2000 has the edge at 82 lbs dry weight versus 1 085 lbs for the Alumacraft PF 175 2013. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.

What is the maximum horsepower rating for these boats?

The Alumacraft PF 175 2013 has a documented max rating of 90 hp. Engine specifications for the Alumacraft Navigator 165 2000 were not available in our database — check the OEM spec sheet or manufacturer's website for confirmation.

How many people can each boat hold?

The Alumacraft Navigator 165 2000 is Coast Guard rated for 5 passengers, while the Alumacraft PF 175 2013 is certified for 4. Note that legal capacity and comfortable capacity aren't always the same thing — on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.

Which boat is wider, and does it affect trailering?

The Alumacraft Navigator 165 2000 measures 82" wide, compared to 56" for the Alumacraft PF 175 2013. The US standard-width towing limit is 8’6" (102") in most states — anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.

Which boat has the larger fuel tank — the Alumacraft Navigator 165 2000 or the Alumacraft PF 175 2013?

The Alumacraft Navigator 165 2000 has the bigger tank at 22 gallons, versus 2 gallons on the Alumacraft PF 175 2013. That 20-gallon difference translates to roughly 60–100 nautical miles of additional range at cruising speed, depending on motor, load, and conditions.

Are the Alumacraft Navigator 165 2000 and Alumacraft PF 175 2013 from the same manufacturer?

Yes — both the Alumacraft Navigator 165 2000 and the Alumacraft PF 175 2013 are built by Alumacraft. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.

← Alumacraft Navigator 165 2000 full specs ← Alumacraft PF 175 2013 full specs