Matching a deep vee Alumacraft Navigator 165 Tiller 2008 against a modified vee Alumacraft VS170 2008 means you're likely deciding between two genuinely different on-water experiences. Hull type shapes everything from ride quality and fuel burn to dock handling and resale trajectory.

On paper these two are close siblings in the size department — Alumacraft Navigator 165 Tiller 2008 at 16,0 ft versus Alumacraft VS170 2008 at 17,0 ft. At 925 lbs and 852 lbs respectively, both sit in a similar weight class — either should pair comfortably with most mid-size SUVs and half-ton trucks, though always confirm your specific tow rating with the motor added.

Both boats share a closely matched power ceiling — 75 hp for the Alumacraft Navigator 165 Tiller 2008 and 70 hp for the Alumacraft VS170 2008. Real-world performance will come down more to which motor is actually bolted on, its load at the time, and whether it's a 4-stroke or 2-stroke setup. Fuel capacity breaks the other way: the Alumacraft VS170 2008 carries 16 gallons versus 2 gallons in the Alumacraft Navigator 165 Tiller 2008. On a lake day that's negligible, but for coastal cruising or long reservoir runs the extra range matters.

For family outings this is probably the sharpest distinction between the two. The Alumacraft Navigator 165 Tiller 2008 is rated for 5 passengers, while the Alumacraft VS170 2008 caps at 4. If you're regularly pulling extended family or a group of friends onto the water, the extra seats on the Alumacraft Navigator 165 Tiller 2008 could be the deciding factor.

At this size, power-to-weight ratio matters more than outright horsepower. The Alumacraft VS170 2008 comes in at 12 lbs per hp versus 12 lbs per hp for the Alumacraft Navigator 165 Tiller 2008. The lower the ratio the more explosive the acceleration — meaningful on a short RIB where bursts of speed, quick planing, and agility in surf or tight waterways define the experience.