The Alumacraft Navigator 165 Sport 2010 is a deep-V design and the Alumacraft VB 1756 AW Tunnel 2009 is a flat-bottom design, so you're likely deciding between two noticeably different on-water experiences. Hull type shapes everything from ride quality and fuel burn to dock handling and resale trajectory.
On paper these two are close siblings in the size department - Alumacraft Navigator 165 Sport 2010 at 16,7 ft versus Alumacraft VB 1756 AW Tunnel 2009 at 17,0 ft. Weight tells a clearer story for trailering families: the Alumacraft Navigator 165 Sport 2010 tips the scales at 1 050 lbs - 450 lbs more than the Alumacraft VB 1756 AW Tunnel 2009 at 600 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.
The power gap is worth calling out. Rated to 90 hp, the Alumacraft Navigator 165 Sport 2010 has a 40-hp advantage over the Alumacraft VB 1756 AW Tunnel 2009's 50-hp ceiling - enough to notice on acceleration and at cruising speed, particularly with a full passenger load.
Both boats are rated for 5 passengers - a good fit for a family of four or five plus guests. Comfort at capacity is another matter; the longer hull typically means more seat options and better weight distribution.
At this size, power-to-weight ratio matters more than outright horsepower. The Alumacraft Navigator 165 Sport 2010 comes in at 12 lbs per hp versus 12 lbs per hp for the Alumacraft VB 1756 AW Tunnel 2009. The lower the ratio the more explosive the acceleration - meaningful on a short RIB where bursts of speed, quick planing, and agility in surf or tight waterways define the experience.
Bottom line: Performance buyers should lean toward the Alumacraft Navigator 165 Sport 2010 and its 90-hp ceiling. If fuel economy and quieter running matter more than top-end speed, the Alumacraft VB 1756 AW Tunnel 2009 with its 50-hp rating is the more economical daily driver.