Alumacraft MV 1756 CC 2004 vs Alumacraft V14 2010 - Boat Spec Comparison

Q: Which is easier to trailer — the Alumacraft MV 1756 CC 2004 or the Alumacraft V14 2010?

For trailering, the Alumacraft MV 1756 CC 2004 has the edge at 6 lbs dry weight versus 23 lbs for the Alumacraft V14 2010. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.

Q: Which boat can handle a bigger outboard?

The Alumacraft MV 1756 CC 2004 is rated to a maximum of 75 hp, giving it the larger power ceiling. The Alumacraft V14 2010 tops out at 20 hp. Keep in mind that maximum ratings are just that — matching the motor to the actual load and usage pattern usually matters more than chasing the ceiling.

Q: How many people can each boat hold?

The Alumacraft MV 1756 CC 2004 is Coast Guard rated for 5 passengers, while the Alumacraft V14 2010 is certified for 5. Note that legal capacity and comfortable capacity aren't always the same thing — on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.

Q: Which boat is wider, and does it affect trailering?

The Alumacraft MV 1756 CC 2004 measures 83" wide, compared to 68" for the Alumacraft V14 2010. The US standard-width towing limit is 8’6" (102") in most states — anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.

Q: Are the Alumacraft MV 1756 CC 2004 and Alumacraft V14 2010 from the same manufacturer?

Yes — both the Alumacraft MV 1756 CC 2004 and the Alumacraft V14 2010 are built by Alumacraft. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.

Boat Comparison

Alumacraft MV 1756 CC 2004 vs Alumacraft V14 2010

Alumacraft

Alumacraft MV 1756 CC 2004

2004

View full specs →

Alumacraft

Alumacraft V14 2010

2010

View full specs →

Detailed Evaluation & Buyer Recommendation

Alumacraft MV 1756 CC 2004 vs Alumacraft V14 2010 — Same Brand, Different Boat

The Alumacraft MV 1756 CC 2004 vs Alumacraft V14 2010 comparison sits squarely in the category of decisions where specs alone won't tell the whole story — intended use, storage, and long-term ownership costs all factor in.

The power gap is worth calling out. Rated to 75 hp, the Alumacraft MV 1756 CC 2004 has a 55-hp advantage over the Alumacraft V14 2010's 20-hp ceiling — enough to notice on acceleration and at cruising speed, particularly with a full passenger load.

Both boats are rated for 5 passengers — a good fit for a family of four or five plus guests. Comfort at capacity is another matter; the longer hull typically means more seat options and better weight distribution.

Bottom line: Performance buyers should lean toward the Alumacraft MV 1756 CC 2004 and its 75-hp ceiling. If fuel economy and quieter running matter more than top-end speed, the Alumacraft V14 2010 with its 20-hp rating is the more economical daily driver.

General Boat Info

MakeAlumacraft

ModelMV 1756 CC

ModelV14

Model Year2004

Model Year201

Measurements / Dimensions

Beam83 in

Beam68 in. (1.73 m)

Beam - Meters2.11

Beam - Meters1.73

Beam - Inches83

Beam - Inches68

Weight - Detail600 lbs

Weight - Detail230 lbs. (104 kg)

Weight - kg272.16

Weight - kg104.33

Weight - lbs.6

Weight - lbs.23

Height - Detail24 in

Height - Detail30 in. (0.76 m)

Height - Meters0.61

Height - Meters0.76

Height - Inches24

Height - Inches3

Height [transom]21 in

Height [transom]15 in. or 20 in. (0.38 m or 0.51 m)

Length overall - Detail17 ft

Length overall - Detail14 ft. 5 in. (4.4 m)

Length overall - Meters5.18

Length overall - Meters4.39

Length overall - Inches204

Length overall - Inches173

Width [transom] - Detailnot available

Width [transom] - Detail62 in. (1.58 m)

Length - Metersnot available

Length - Meters4.4

Length - Feetnot available

Length - Feet14.42

Body / Hull

Hull materialAluminum

Hull thicknessnot available

Hull thicknessBottom: 0.065 in. (1.65 mm) Sides: 0.065 in. (1.65 mm)

Hull typenot available

Hull typeOther

Engine and Drivetrain

Engine max75 hp w/Tiller Steering

Engine max20 hp (15 kW)

Fuel typenot available

Fuel typeGas

Drive typenot available

Drive typeOutboard

Operational Info

Maximum people5 persons

Maximum people5

Maximum capacitynot available

Maximum capacity1,015 lbs. (542 kg)

Alumacraft MV 1756 CC 2004 vs Alumacraft V14 2010 — Common Questions

Which is easier to trailer — the Alumacraft MV 1756 CC 2004 or the Alumacraft V14 2010?

For trailering, the Alumacraft MV 1756 CC 2004 has the edge at 6 lbs dry weight versus 23 lbs for the Alumacraft V14 2010. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.

Which boat can handle a bigger outboard?

The Alumacraft MV 1756 CC 2004 is rated to a maximum of 75 hp, giving it the larger power ceiling. The Alumacraft V14 2010 tops out at 20 hp. Keep in mind that maximum ratings are just that — matching the motor to the actual load and usage pattern usually matters more than chasing the ceiling.

How many people can each boat hold?

The Alumacraft MV 1756 CC 2004 is Coast Guard rated for 5 passengers, while the Alumacraft V14 2010 is certified for 5. Note that legal capacity and comfortable capacity aren't always the same thing — on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.

Which boat is wider, and does it affect trailering?

The Alumacraft MV 1756 CC 2004 measures 83" wide, compared to 68" for the Alumacraft V14 2010. The US standard-width towing limit is 8’6" (102") in most states — anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.

Are the Alumacraft MV 1756 CC 2004 and Alumacraft V14 2010 from the same manufacturer?

Yes — both the Alumacraft MV 1756 CC 2004 and the Alumacraft V14 2010 are built by Alumacraft. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.

← Alumacraft MV 1756 CC 2004 full specs ← Alumacraft V14 2010 full specs