Alumacraft MV 1756 AW 2010 vs Alumacraft Pro 185 2012 - Boat Spec Comparison

Q: Which is the larger boat — the Alumacraft MV 1756 AW 2010 or the Alumacraft Pro 185 2012?

The Alumacraft Pro 185 2012 is the longer of the two at 18,4 feet overall. The Alumacraft MV 1756 AW 2010 comes in at 17,0 feet, making it roughly 1,4 ft shorter — a meaningful difference in deck room and overall on-water presence.

Q: Which is easier to trailer — the Alumacraft MV 1756 AW 2010 or the Alumacraft Pro 185 2012?

For trailering, the Alumacraft MV 1756 AW 2010 has the edge at 6 lbs dry weight versus 11 lbs for the Alumacraft Pro 185 2012. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.

Q: Which boat can handle a bigger outboard?

The Alumacraft Pro 185 2012 is rated to a maximum of 115 hp, giving it the larger power ceiling. The Alumacraft MV 1756 AW 2010 tops out at 50 hp. Keep in mind that maximum ratings are just that — matching the motor to the actual load and usage pattern usually matters more than chasing the ceiling.

Q: How many people can each boat hold?

The Alumacraft MV 1756 AW 2010 is Coast Guard rated for 5 passengers, while the Alumacraft Pro 185 2012 is certified for 4. Note that legal capacity and comfortable capacity aren't always the same thing — on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.

Q: Which boat is wider, and does it affect trailering?

The Alumacraft MV 1756 AW 2010 measures 83" wide, compared to 6" for the Alumacraft Pro 185 2012. The US standard-width towing limit is 8’6" (102") in most states — anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.

Q: Are the Alumacraft MV 1756 AW 2010 and Alumacraft Pro 185 2012 from the same manufacturer?

Yes — both the Alumacraft MV 1756 AW 2010 and the Alumacraft Pro 185 2012 are built by Alumacraft. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.

Boat Comparison

Alumacraft MV 1756 AW 2010 vs Alumacraft Pro 185 2012

Alumacraft

Alumacraft MV 1756 AW 2010

2010

View full specs →

Alumacraft

Alumacraft Pro 185 2012

2012

View full specs →

Detailed Evaluation & Buyer Recommendation

Alumacraft MV 1756 AW 2010 vs Alumacraft Pro 185 2012 — Same Brand, Different Boat

Matching a modified vee Alumacraft MV 1756 AW 2010 against a flat Alumacraft Pro 185 2012 means you're likely deciding between two genuinely different on-water experiences. Hull type shapes everything from ride quality and fuel burn to dock handling and resale trajectory.

On paper these two are close siblings in the size department — Alumacraft MV 1756 AW 2010 at 17,0 ft versus Alumacraft Pro 185 2012 at 18,4 ft. At 6 lbs and 11 lbs respectively, both sit in a similar weight class — either should pair comfortably with most mid-size SUVs and half-ton trucks, though always confirm your specific tow rating with the motor added.

The power gap is worth calling out. Rated to 115 hp, the Alumacraft Pro 185 2012 has a 65-hp advantage over the Alumacraft MV 1756 AW 2010's 50-hp ceiling — enough to notice on acceleration and at cruising speed, particularly with a full passenger load.

For family outings this is probably the sharpest distinction between the two. The Alumacraft MV 1756 AW 2010 is rated for 5 passengers, while the Alumacraft Pro 185 2012 caps at 4. If you're regularly pulling extended family or a group of friends onto the water, the extra seats on the Alumacraft MV 1756 AW 2010 could be the deciding factor.

Bottom line: Choose the Alumacraft MV 1756 AW 2010 if your priority is putting more people on the water — it handles 5 passengers and at 17,0 ft it has the deck room to back that rating up comfortably. The Alumacraft Pro 185 2012 is the smarter pick if you want a lighter, easier-to-trailer boat rated for 4 that costs less to run day-to-day.

General Boat Info

MakeAlumacraft

ModelMV 1756 AW

ModelPro 185

Model Year201

Model Year2012

Measurements / Dimensions

Beam83 in. (2.11 m)

Beam88 / 60 in. (2.18 / 1.52 m)

Beam - Meters2.11

Beam - Meters1.52

Beam - Inches83

Beam - Inches6

Weight - Detail600 lbs. (272 kg)

Weight - Detail1,100 lbs. (498 kg)

Weight - kg272.16

Weight - kg498.95

Weight - lbs.6

Weight - lbs.11

Width [transom] - Detail56 in. (1.42 m)

Width [transom] - Detail86 in. (2.18 m)

Height - Detail24 in. (.61 m)

Height - DetailSide Height: 24 in. (0.61 m)

Height - Meters0.61

Height - Inches24

Height [transom]21 in. (.53 m)

Height [transom]21 in. (0.53 m)

Length - Meters5.2

Length - Metersnot available

Length - Feet17

Length - Feet18.42

Length overall - Detail17 ft. (5.2 m)

Length overall - Detail18 ft. 5 in. (5.62 m)

Length overall - Meters5.18

Length overall - Meters5.61

Length overall - Inches204

Length overall - Inches221

Body / Hull

Hull materialAluminum

Hull thickness0.102 in. (2.6 mm)

Hull thicknessBottom and Sides: 0.102 in. (2.6 mm)

Hull typeModified Vee

Hull typeFlat

Engine and Drivetrain

Fuel typeGas

Drive typeOutboard

Engine max50 hp (37 kW)

Engine max115 hp (86 kW)

Fuel tank capacity - Detailnot available

Fuel tank capacity - Detail21 gal. (79.5 l)

Fuel tank capacity - Litersnot available

Fuel tank capacity - Liters79.49

Fuel tank capacity - Galnot available

Fuel tank capacity - Gal21

Operational Info

Maximum capacity1,300 lbs. (589.7 kg)

Maximum capacity1,200 lbs. (544 kg)

Maximum people5

Maximum people4

Storagenot available

StorageBow and Aft Livewells: 20 gal. ea. (75.71 l)

Alumacraft MV 1756 AW 2010 vs Alumacraft Pro 185 2012 — Common Questions

Which is the larger boat — the Alumacraft MV 1756 AW 2010 or the Alumacraft Pro 185 2012?

The Alumacraft Pro 185 2012 is the longer of the two at 18,4 feet overall. The Alumacraft MV 1756 AW 2010 comes in at 17,0 feet, making it roughly 1,4 ft shorter — a meaningful difference in deck room and overall on-water presence.

Which is easier to trailer — the Alumacraft MV 1756 AW 2010 or the Alumacraft Pro 185 2012?

For trailering, the Alumacraft MV 1756 AW 2010 has the edge at 6 lbs dry weight versus 11 lbs for the Alumacraft Pro 185 2012. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.

Which boat can handle a bigger outboard?

The Alumacraft Pro 185 2012 is rated to a maximum of 115 hp, giving it the larger power ceiling. The Alumacraft MV 1756 AW 2010 tops out at 50 hp. Keep in mind that maximum ratings are just that — matching the motor to the actual load and usage pattern usually matters more than chasing the ceiling.

How many people can each boat hold?

The Alumacraft MV 1756 AW 2010 is Coast Guard rated for 5 passengers, while the Alumacraft Pro 185 2012 is certified for 4. Note that legal capacity and comfortable capacity aren't always the same thing — on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.

Which boat is wider, and does it affect trailering?

The Alumacraft MV 1756 AW 2010 measures 83" wide, compared to 6" for the Alumacraft Pro 185 2012. The US standard-width towing limit is 8’6" (102") in most states — anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.

Are the Alumacraft MV 1756 AW 2010 and Alumacraft Pro 185 2012 from the same manufacturer?

Yes — both the Alumacraft MV 1756 AW 2010 and the Alumacraft Pro 185 2012 are built by Alumacraft. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.

← Alumacraft MV 1756 AW 2010 full specs ← Alumacraft Pro 185 2012 full specs