Alumacraft MV 1756 AW 2009 boat specs
Alumacraft
Alumacraft MV 1756 AW 2009
2009
View full specs →
VS
Alumacraft PF 175 2012 boat specs
Alumacraft
Alumacraft PF 175 2012
2012
View full specs →

Alumacraft MV 1756 AW 2009 vs Alumacraft PF 175 2012: Same Brand, Different Boat

The Alumacraft MV 1756 AW 2009 is a modified-V design and the Alumacraft PF 175 2012 is a flat-bottom design, so you're likely deciding between two noticeably different on-water experiences. Hull type shapes everything from ride quality and fuel burn to dock handling and resale trajectory.

On paper these two are close siblings in the size department - Alumacraft MV 1756 AW 2009 at 17,0 ft versus Alumacraft PF 175 2012 at 17,4 ft. Weight tells a clearer story for trailering families: the Alumacraft PF 175 2012 tips the scales at 1 050 lbs - 450 lbs less than the Alumacraft MV 1756 AW 2009 at 600 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.

The power gap is worth calling out. Rated to 90 hp, the Alumacraft PF 175 2012 has a 40-hp advantage over the Alumacraft MV 1756 AW 2009's 50-hp ceiling - enough to notice on acceleration and at cruising speed, particularly with a full passenger load.

For family outings this is probably the sharpest distinction between the two. The Alumacraft MV 1756 AW 2009 is rated for 5 passengers, while the Alumacraft PF 175 2012 caps at 4. If you're regularly pulling extended family or a group of friends onto the water, the extra seats on the Alumacraft MV 1756 AW 2009 could be the deciding factor.

At this size, power-to-weight ratio matters more than outright horsepower. The Alumacraft PF 175 2012 comes in at 12 lbs per hp versus 12 lbs per hp for the Alumacraft MV 1756 AW 2009. The lower the ratio the more explosive the acceleration - meaningful on a short RIB where bursts of speed, quick planing, and agility in surf or tight waterways define the experience.

Bottom line: Choose the Alumacraft MV 1756 AW 2009 if your priority is putting more people on the water - it handles 5 passengers and at 17,0 ft it has the deck room to back that rating up comfortably. The Alumacraft PF 175 2012 is the smarter pick if you want a lighter, easier-to-trailer boat rated for 4 that costs less to run day-to-day.
General Boat Info
MakeAlumacraft
MakeAlumacraft
ModelMV 1756 AW
ModelPF 175
Model Year2009
Model Year2012
Measurements / Dimensions
Beam83 in.
Beam88 / 56 in. (2.24 / 1.42 m)
Beam - Meters2.11
Beam - Meters1.42
Beam - Inches83
Beam - Inches56
Weight - Detail600 lbs.
Weight - Detail1,050 lbs. (476.27 kg)
Weight - kg272.16
Weight - kg476.27
Weight - lbs.600
Weight - lbs.1050
Width [transom] - Detail56 in.
Width [transom] - Detail88 in. (2.13 m)
Height - Detail24 in.
Height - DetailSide Height: 23 in. (0.58 m)
Height - Meters0.61
Height - Meters0.58
Height - Inches24
Height - Inches23
Height [transom]21 in.
Height [transom]21 in. (0.53 m)
Length - Feet17
Length - Feet17.42
Length overall - Detail17 ft.
Length overall - Detail17 ft. 5 in. (5.31 m)
Length overall - Meters5.18
Length overall - Meters5.31
Length overall - Inches204
Length overall - Inches209
Body / Hull
Hull materialAluminum
Hull materialAluminum
Hull thickness0.102 in.
Hull thicknessBottom and Sides: 0.102 in. (2.6 mm)
Hull typeModified Vee
Hull typeFlat
Engine and Drivetrain
Fuel typeGas
Fuel typeGas
Drive typeOutboard
Drive typeOutboard
Engine max50 hp
Engine max90 hp (67 kW)
Fuel tank capacity - Detailnot available
Fuel tank capacity - Detail21 gal. (79.5 l)
Fuel tank capacity - Litersnot available
Fuel tank capacity - Liters79.49
Fuel tank capacity - Galnot available
Fuel tank capacity - Gal21
Operational Info
Maximum capacity1,300 lbs.
Maximum capacity1,195 lbs. (542 kg)
Maximum people5
Maximum people4
Storagenot available
StorageBow and Aft Livewells: 20 gal. ea. (75.71 l)

Alumacraft MV 1756 AW 2009 vs Alumacraft PF 175 2012 - Common Questions

Which is the larger boat - the Alumacraft MV 1756 AW 2009 or the Alumacraft PF 175 2012?
The Alumacraft PF 175 2012 is the longer of the two at 17,4 feet overall. The Alumacraft MV 1756 AW 2009 comes in at 17,0 feet, making it roughly 0,4 ft shorter - a meaningful difference in deck room and overall on-water presence.
Which is easier to trailer - the Alumacraft MV 1756 AW 2009 or the Alumacraft PF 175 2012?
For trailering, the Alumacraft MV 1756 AW 2009 has the edge at 600 lbs dry weight versus 1 050 lbs for the Alumacraft PF 175 2012. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.
Which boat can handle a bigger outboard?
The Alumacraft PF 175 2012 is rated to a maximum of 90 hp, giving it the larger power ceiling. The Alumacraft MV 1756 AW 2009 tops out at 50 hp. Keep in mind that maximum ratings are just that - matching the motor to the actual load and usage pattern usually matters more than chasing the ceiling.
How many people can each boat hold?
The Alumacraft MV 1756 AW 2009 is Coast Guard rated for 5 passengers, while the Alumacraft PF 175 2012 is certified for 4. Note that legal capacity and comfortable capacity aren't always the same thing - on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.
Which boat has the better power-to-weight ratio?
The Alumacraft PF 175 2012 has a better power-to-weight ratio at 12 lbs per hp compared to 12 lbs per hp for the Alumacraft MV 1756 AW 2009. A lower number means quicker acceleration and faster time to plane - the number that actually matters most on short, sporty boats like these.
Which boat is wider, and does it affect trailering?
The Alumacraft MV 1756 AW 2009 measures 83" wide, compared to 56" for the Alumacraft PF 175 2012. The US standard-width towing limit is 8’6" (102") in most states - anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.
Are the Alumacraft MV 1756 AW 2009 and Alumacraft PF 175 2012 from the same manufacturer?
Yes - both the Alumacraft MV 1756 AW 2009 and the Alumacraft PF 175 2012 are built by Alumacraft. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.