Alumacraft MV 1756 AW 2008 boat specs
Alumacraft
Alumacraft MV 1756 AW 2008
2008
View full specs →
VS
Alumacraft Riveted Jon MV 1648 SS 2012 boat specs
Alumacraft
Alumacraft Riveted Jon MV 1648 SS 2012
2012
View full specs →

Alumacraft MV 1756 AW 2008 vs Alumacraft Riveted Jon MV 1648 SS 2012: A Close Look at Two Modified-V Boats

Both the Alumacraft MV 1756 AW 2008 and the Alumacraft Riveted Jon MV 1648 SS 2012 are modified-V designs, both built in aluminium, so the buying decision usually comes down to a handful of practical questions: how many people are you putting on the water, how far do you trailer, and what does your tow vehicle weigh?

On paper these two are close siblings in the size department - Alumacraft MV 1756 AW 2008 at 17,0 ft versus Alumacraft Riveted Jon MV 1648 SS 2012 at 16,0 ft. Weight tells a clearer story for trailering families: the Alumacraft MV 1756 AW 2008 tips the scales at 600 lbs - 320 lbs more than the Alumacraft Riveted Jon MV 1648 SS 2012 at 280 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.

Both boats share a closely matched power ceiling - 50 hp for the Alumacraft MV 1756 AW 2008 and 30 hp for the Alumacraft Riveted Jon MV 1648 SS 2012. Real-world performance will come down more to which motor is actually bolted on, its load at the time, and whether it's a 4-stroke or 2-stroke setup.

Both boats are rated for 5 passengers - a good fit for a family of four or five plus guests. Comfort at capacity is another matter; the longer hull typically means more seat options and better weight distribution.

At this size, power-to-weight ratio matters more than outright horsepower. The Alumacraft Riveted Jon MV 1648 SS 2012 comes in at 9 lbs per hp versus 12 lbs per hp for the Alumacraft MV 1756 AW 2008. The lower the ratio the more explosive the acceleration - meaningful on a short RIB where bursts of speed, quick planing, and agility in surf or tight waterways define the experience.

Bottom line: Performance buyers should lean toward the Alumacraft MV 1756 AW 2008 and its 50-hp ceiling. If fuel economy and quieter running matter more than top-end speed, the Alumacraft Riveted Jon MV 1648 SS 2012 with its 30-hp rating is the more economical daily driver.
General Boat Info
MakeAlumacraft
MakeAlumacraft
ModelMV 1756 AW
ModelRiveted Jon MV 1648 SS
Model Year2008
Model Year2012
Measurements / Dimensions
Beam83 in.
Beam70 in.
Beam - Meters2.11
Beam - Meters1.78
Beam - Inches83
Beam - Inches70
Weight - Detail600 lbs.
Weight - Detail280 lbs.
Weight - kg272.16
Weight - kg127.01
Weight - lbs.600
Weight - lbs.280
Width [transom] - Detail56 in.
Width [transom] - Detailnot available
Height - Detail24 in.
Height - Detail21 in.
Height - Meters0.61
Height - Meters0.53
Height - Inches24
Height - Inches21
Height [transom]21 in.
Height [transom]15 / 20 in.
Length - Feet17
Length - Feet16
Length overall - Detail17 ft.
Length overall - Detail16 ft.
Length overall - Meters5.18
Length overall - Meters4.88
Length overall - Inches204
Length overall - Inches192
Body / Hull
Hull materialAluminum
Hull materialAluminum
Hull thickness0.102 in.
Hull thickness0.070 in.
Hull typeModified Vee
Hull typeModified Vee
Engine and Drivetrain
Fuel typeGas
Fuel typeGas
Drive typeOutboard
Drive typeOutboard
Engine max50 hp, 75 hp with optional console and optional floor
Engine max30 hp
Operational Info
Maximum capacity825 lbs.
Maximum capacity1,010 lbs.
Maximum people5
Maximum people5

Alumacraft MV 1756 AW 2008 vs Alumacraft Riveted Jon MV 1648 SS 2012 - Common Questions

Which is the larger boat - the Alumacraft MV 1756 AW 2008 or the Alumacraft Riveted Jon MV 1648 SS 2012?
The Alumacraft MV 1756 AW 2008 is the longer of the two at 17,0 feet overall. The Alumacraft Riveted Jon MV 1648 SS 2012 comes in at 16,0 feet, making it roughly 1,0 ft shorter - a meaningful difference in deck room and overall on-water presence.
Which is easier to trailer - the Alumacraft MV 1756 AW 2008 or the Alumacraft Riveted Jon MV 1648 SS 2012?
For trailering, the Alumacraft Riveted Jon MV 1648 SS 2012 has the edge at 280 lbs dry weight versus 600 lbs for the Alumacraft MV 1756 AW 2008. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.
Which boat can handle a bigger outboard?
The Alumacraft MV 1756 AW 2008 is rated to a maximum of 50 hp, giving it the larger power ceiling. The Alumacraft Riveted Jon MV 1648 SS 2012 tops out at 30 hp. Keep in mind that maximum ratings are just that - matching the motor to the actual load and usage pattern usually matters more than chasing the ceiling.
How many people can each boat hold?
The Alumacraft MV 1756 AW 2008 is Coast Guard rated for 5 passengers, while the Alumacraft Riveted Jon MV 1648 SS 2012 is certified for 5. Note that legal capacity and comfortable capacity aren't always the same thing - on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.
Which boat has the better power-to-weight ratio?
The Alumacraft Riveted Jon MV 1648 SS 2012 has a better power-to-weight ratio at 9 lbs per hp compared to 12 lbs per hp for the Alumacraft MV 1756 AW 2008. A lower number means quicker acceleration and faster time to plane - the number that actually matters most on short, sporty boats like these.
Which boat is wider, and does it affect trailering?
The Alumacraft MV 1756 AW 2008 measures 83" wide, compared to 70" for the Alumacraft Riveted Jon MV 1648 SS 2012. The US standard-width towing limit is 8’6" (102") in most states - anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.
Are the Alumacraft MV 1756 AW 2008 and Alumacraft Riveted Jon MV 1648 SS 2012 from the same manufacturer?
Yes - both the Alumacraft MV 1756 AW 2008 and the Alumacraft Riveted Jon MV 1648 SS 2012 are built by Alumacraft. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.