Matching a modified vee Alumacraft MV 1756 AW SC 2010 against a deep vee Alumacraft Tournament Pro 185 Tiller 2009 means you're likely deciding between two genuinely different on-water experiences. Hull type shapes everything from ride quality and fuel burn to dock handling and resale trajectory.

On paper these two are close siblings in the size department — Alumacraft MV 1756 AW SC 2010 at 17,0 ft versus Alumacraft Tournament Pro 185 Tiller 2009 at 18,0 ft. Weight tells a clearer story for trailering families: the Alumacraft Tournament Pro 185 Tiller 2009 tips the scales at 1 385 lbs — 1 302 lbs less than the Alumacraft MV 1756 AW SC 2010 at 83 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.

Both boats share a closely matched power ceiling — 75 hp for the Alumacraft MV 1756 AW SC 2010 and 90 hp for the Alumacraft Tournament Pro 185 Tiller 2009. Real-world performance will come down more to which motor is actually bolted on, its load at the time, and whether it's a 4-stroke or 2-stroke setup. Fuel capacity breaks the other way: the Alumacraft Tournament Pro 185 Tiller 2009 carries 38 gallons versus 16 gallons in the Alumacraft MV 1756 AW SC 2010. On a lake day that's negligible, but for coastal cruising or long reservoir runs the extra range matters.

Both boats are rated for 5 passengers — a good fit for a family of four or five plus guests. Comfort at capacity is another matter; the longer hull typically means more seat options and better weight distribution.

At this size, power-to-weight ratio matters more than outright horsepower. The Alumacraft MV 1756 AW SC 2010 comes in at 1 lbs per hp versus 15 lbs per hp for the Alumacraft Tournament Pro 185 Tiller 2009. The lower the ratio the more explosive the acceleration — meaningful on a short RIB where bursts of speed, quick planing, and agility in surf or tight waterways define the experience.