Alumacraft MV 1756 AW SC 2010 vs Alumacraft MV 1756 CC 2004 - Boat Spec Comparison

Q: Which is easier to trailer — the Alumacraft MV 1756 AW SC 2010 or the Alumacraft MV 1756 CC 2004?

For trailering, the Alumacraft MV 1756 CC 2004 has the edge at 6 lbs dry weight versus 83 lbs for the Alumacraft MV 1756 AW SC 2010. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.

Q: How many people can each boat hold?

The Alumacraft MV 1756 AW SC 2010 is Coast Guard rated for 5 passengers, while the Alumacraft MV 1756 CC 2004 is certified for 5. Note that legal capacity and comfortable capacity aren't always the same thing — on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.

Q: Do these boats require an oversize trailer permit to tow on US highways?

Both the Alumacraft MV 1756 AW SC 2010 and Alumacraft MV 1756 CC 2004 share an 83 in. (2.11 m) beam — meaning both sit right at the 8’6" threshold that most US states use for standard-width loads. In most states you can tow at that width without a special permit, but regulations vary. Always check the rules for your state and any states you'll be passing through before your first long haul.

Q: Are the Alumacraft MV 1756 AW SC 2010 and Alumacraft MV 1756 CC 2004 from the same manufacturer?

Yes — both the Alumacraft MV 1756 AW SC 2010 and the Alumacraft MV 1756 CC 2004 are built by Alumacraft. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.

Boat Comparison

Alumacraft MV 1756 AW SC 2010 vs Alumacraft MV 1756 CC 2004

Alumacraft

Alumacraft MV 1756 AW SC 2010

2010

View full specs →

Alumacraft

Alumacraft MV 1756 CC 2004

2004

View full specs →

Detailed Evaluation & Buyer Recommendation

Alumacraft MV 1756 AW SC 2010 vs Alumacraft MV 1756 CC 2004 — Same Brand, Different Boat

The Alumacraft MV 1756 AW SC 2010 vs Alumacraft MV 1756 CC 2004 comparison sits squarely in the category of decisions where specs alone won't tell the whole story — intended use, storage, and long-term ownership costs all factor in.

Both boats share a closely matched power ceiling — 75 hp for the Alumacraft MV 1756 AW SC 2010 and 75 hp for the Alumacraft MV 1756 CC 2004. Real-world performance will come down more to which motor is actually bolted on, its load at the time, and whether it's a 4-stroke or 2-stroke setup.

Both boats are rated for 5 passengers — a good fit for a family of four or five plus guests. Comfort at capacity is another matter; the longer hull typically means more seat options and better weight distribution.

Bottom line: The Alumacraft MV 1756 AW SC 2010 and Alumacraft MV 1756 CC 2004 are closely matched on the specs that matter most. Test-ride both on the water you actually use, check current dealer pricing, and factor in long-term service access before you sign.

General Boat Info

MakeAlumacraft

ModelMV 1756 AW SC

ModelMV 1756 CC

Model Year201

Model Year2004

Measurements / Dimensions

Beam83 in. (2.11 m)

Beam83 in

Beam - Meters2.11

Beam - Inches83

Weight - Detail830 lbs. (376 kg)

Weight - Detail600 lbs

Weight - kg376.48

Weight - kg272.16

Weight - lbs.83

Weight - lbs.6

Width [transom] - Detail56 in. (1.42 m)

Width [transom] - Detailnot available

Height - Detail24 in. (.61 m)

Height - Detail24 in

Height - Meters0.61

Height - Inches24

Height [transom]21 in. (.53 m)

Height [transom]21 in

Length - Meters5.2

Length - Metersnot available

Length - Feet17

Length - Feetnot available

Length overall - Detail17 ft. (5.2 m)

Length overall - Detail17 ft

Length overall - Meters5.18

Length overall - Inches204

Body / Hull

Hull materialAluminum

Hull thickness0.102 in. (2.6 mm)

Hull thicknessnot available

Hull typeModified Vee

Hull typenot available

Engine and Drivetrain

Fuel tank capacity - Detail16 gal. (60.6 l)

Fuel tank capacity - Detailnot available

Fuel tank capacity - Liters60.57

Fuel tank capacity - Litersnot available

Fuel tank capacity - Gal16

Fuel tank capacity - Galnot available

Fuel typeGas

Fuel typenot available

Drive typeOutboard

Drive typenot available

Engine max75 hp (56 kW)

Engine max75 hp w/Tiller Steering

Operational Info

Maximum capacity1,300 lbs. (589.7 kg)

Maximum capacitynot available

Maximum people5

Maximum people5 persons

Alumacraft MV 1756 AW SC 2010 vs Alumacraft MV 1756 CC 2004 — Common Questions

Which is easier to trailer — the Alumacraft MV 1756 AW SC 2010 or the Alumacraft MV 1756 CC 2004?

For trailering, the Alumacraft MV 1756 CC 2004 has the edge at 6 lbs dry weight versus 83 lbs for the Alumacraft MV 1756 AW SC 2010. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.

How many people can each boat hold?

The Alumacraft MV 1756 AW SC 2010 is Coast Guard rated for 5 passengers, while the Alumacraft MV 1756 CC 2004 is certified for 5. Note that legal capacity and comfortable capacity aren't always the same thing — on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.

Do these boats require an oversize trailer permit to tow on US highways?

Both the Alumacraft MV 1756 AW SC 2010 and Alumacraft MV 1756 CC 2004 share an 83 in. (2.11 m) beam — meaning both sit right at the 8’6" threshold that most US states use for standard-width loads. In most states you can tow at that width without a special permit, but regulations vary. Always check the rules for your state and any states you'll be passing through before your first long haul.

Are the Alumacraft MV 1756 AW SC 2010 and Alumacraft MV 1756 CC 2004 from the same manufacturer?

Yes — both the Alumacraft MV 1756 AW SC 2010 and the Alumacraft MV 1756 CC 2004 are built by Alumacraft. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.

← Alumacraft MV 1756 AW SC 2010 full specs ← Alumacraft MV 1756 CC 2004 full specs