Alumacraft MV 1756 AW SC  2008 boat specs
Alumacraft
Alumacraft MV 1756 AW SC 2008
2008
View full specs →
VS
Alumacraft V-14 20 2013 boat specs
Alumacraft
Alumacraft V-14 20 2013
2013
View full specs →

Alumacraft MV 1756 AW SC 2008 vs Alumacraft V-14 20 2013 — A Close Look at Two Modified Vees

When two boats share the same hull type — in this case both the Alumacraft MV 1756 AW SC 2008 and the Alumacraft V-14 20 2013 are modified vee designs with aluminum construction — the buying decision usually comes down to a handful of practical questions: how many people are you putting on the water, how far do you trailer, and what does your tow vehicle weigh?

On paper these two are close siblings in the size department — Alumacraft MV 1756 AW SC 2008 at 17,0 ft versus Alumacraft V-14 20 2013 at 14,3 ft. Weight tells a clearer story for trailering families: the Alumacraft V-14 20 2013 tips the scales at 235 lbs — 152 lbs less than the Alumacraft MV 1756 AW SC 2008 at 83 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.

The power gap is worth calling out. Rated to 75 hp, the Alumacraft MV 1756 AW SC 2008 has a 55-hp advantage over the Alumacraft V-14 20 2013's 20-hp ceiling — enough to notice on acceleration and at cruising speed, particularly with a full passenger load.

Both boats are rated for 5 passengers — a good fit for a family of four or five plus guests. Comfort at capacity is another matter; the longer hull typically means more seat options and better weight distribution.

At this size, power-to-weight ratio matters more than outright horsepower. The Alumacraft MV 1756 AW SC 2008 comes in at 1 lbs per hp versus 12 lbs per hp for the Alumacraft V-14 20 2013. The lower the ratio the more explosive the acceleration — meaningful on a short RIB where bursts of speed, quick planing, and agility in surf or tight waterways define the experience.

Bottom line: The Alumacraft MV 1756 AW SC 2008 at 17,0 ft is the right call if deck space, comfort, and entertaining are top of your list. The Alumacraft V-14 20 2013 at 14,3 ft wins on trailering ease, likely lower purchase price, and simpler docking — a solid choice for a buyer who wants more boat for less money.
General Boat Info
MakeAlumacraft
MakeAlumacraft
ModelMV 1756 AW SC
ModelV-14 2
Model Year2008
Model Year2013
Measurements / Dimensions
Beam83 in
Beam68 in. (1.72 m)
Beam - Meters2.11
Beam - Meters1.73
Beam - Inches83
Beam - Inches68
Weight - Detail830 lbs
Weight - Detail235 lbs. (107 kg)
Weight - kg376.48
Weight - kg106.59
Weight - lbs.83
Weight - lbs.235
Width [transom] - Detail56 in
Width [transom] - Detail62 in. (1.58 m)
Height - Detail24 in
Height - Detail30 in. (0.76 m) bow
Height - Meters0.61
Height - Meters0.76
Height - Inches24
Height - Inches3
Height [transom]21 in
Height [transom]20 in. (0.51 m)
Length - Feet17
Length - Feet14.25
Length overall - Detail17 ft
Length overall - Detail14 ft. 3 in. (4.3 m)
Length overall - Meters5.18
Length overall - Meters4.34
Length overall - Inches204
Length overall - Inches171
Body / Hull
Hull materialAluminum
Hull materialAluminum
Hull thickness0.102 in
Hull thickness0.065 in. (1.65 mm)
Hull typeModified Vee
Hull typeModified Vee
Engine and Drivetrain
Fuel tank capacity - Detail16 gal
Fuel tank capacity - Detailnot available
Fuel tank capacity - Liters60.57
Fuel tank capacity - Litersnot available
Fuel tank capacity - Gal16
Fuel tank capacity - Galnot available
Fuel typeGas
Fuel typeGas
Drive typeOutboard
Drive typeOutboard
Engine max75 hp
Engine max20 hp (14.9 kW)
Operational Info
Maximum capacity825 lbs
Maximum capacity1,195 lbs. (542 kg)
Maximum people5
Maximum people5

Alumacraft MV 1756 AW SC 2008 vs Alumacraft V-14 20 2013 — Common Questions

Which is the larger boat — the Alumacraft MV 1756 AW SC 2008 or the Alumacraft V-14 20 2013?
The Alumacraft MV 1756 AW SC 2008 is the longer of the two at 17,0 feet overall. The Alumacraft V-14 20 2013 comes in at 14,3 feet, making it roughly 2,8 ft shorter — a meaningful difference in deck room and overall on-water presence.
Which is easier to trailer — the Alumacraft MV 1756 AW SC 2008 or the Alumacraft V-14 20 2013?
For trailering, the Alumacraft MV 1756 AW SC 2008 has the edge at 83 lbs dry weight versus 235 lbs for the Alumacraft V-14 20 2013. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.
Which boat can handle a bigger outboard?
The Alumacraft MV 1756 AW SC 2008 is rated to a maximum of 75 hp, giving it the larger power ceiling. The Alumacraft V-14 20 2013 tops out at 20 hp. Keep in mind that maximum ratings are just that — matching the motor to the actual load and usage pattern usually matters more than chasing the ceiling.
How many people can each boat hold?
The Alumacraft MV 1756 AW SC 2008 is Coast Guard rated for 5 passengers, while the Alumacraft V-14 20 2013 is certified for 5. Note that legal capacity and comfortable capacity aren't always the same thing — on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.
Which boat has the better power-to-weight ratio?
The Alumacraft MV 1756 AW SC 2008 has a better power-to-weight ratio at 1 lbs per hp compared to 12 lbs per hp for the Alumacraft V-14 20 2013. A lower number means quicker acceleration and faster time to plane — the number that actually matters most on short, sporty boats like these.
Which boat is wider, and does it affect trailering?
The Alumacraft MV 1756 AW SC 2008 measures 83" wide, compared to 68" for the Alumacraft V-14 20 2013. The US standard-width towing limit is 8’6" (102") in most states — anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.
Are the Alumacraft MV 1756 AW SC 2008 and Alumacraft V-14 20 2013 from the same manufacturer?
Yes — both the Alumacraft MV 1756 AW SC 2008 and the Alumacraft V-14 20 2013 are built by Alumacraft. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.