The Alumacraft MV 1756 AW RR 2007 vs Alumacraft VS170 2005 comparison sits squarely in the category of decisions where specs alone won't tell the whole story: intended use, storage, and long-term ownership costs all factor in.
On paper these two are close siblings in the size department - Alumacraft MV 1756 AW RR 2007 at 17,0 ft versus Alumacraft VS170 2005 at 17,0 ft. At 860 lbs and 852 lbs respectively, both sit in a similar weight class - either should pair comfortably with most mid-size SUVs and half-ton trucks, though always confirm your specific tow rating with the motor added.
The power gap is worth calling out. Rated to 115 hp, the Alumacraft MV 1756 AW RR 2007 has a 25-hp advantage over the Alumacraft VS170 2005's 90-hp ceiling - enough to notice on acceleration and at cruising speed, particularly with a full passenger load. Both carry nearly identical fuel loads - 16 gal and 18 gal - so range won't be a tiebreaker here.
Both boats are rated for 4 passengers - a good fit for a family of four or five plus guests. Comfort at capacity is another matter; the longer hull typically means more seat options and better weight distribution.
At this size, power-to-weight ratio matters more than outright horsepower. The Alumacraft MV 1756 AW RR 2007 comes in at 8 lbs per hp versus 10 lbs per hp for the Alumacraft VS170 2005. The lower the ratio the more explosive the acceleration - meaningful on a short RIB where bursts of speed, quick planing, and agility in surf or tight waterways define the experience.
Bottom line: Performance buyers should lean toward the Alumacraft MV 1756 AW RR 2007 and its 115-hp ceiling. If fuel economy and quieter running matter more than top-end speed, the Alumacraft VS170 2005 with its 90-hp rating is the more economical daily driver.