The Alumacraft MV 1650 AW 2013 vs Alumacraft PF170 2005 comparison sits squarely in the category of decisions where specs alone won't tell the whole story: intended use, storage, and long-term ownership costs all factor in.
On paper these two are close siblings in the size department - Alumacraft MV 1650 AW 2013 at 16,0 ft versus Alumacraft PF170 2005 at 17,0 ft. Weight tells a clearer story for trailering families: the Alumacraft PF170 2005 tips the scales at 800 lbs - 330 lbs less than the Alumacraft MV 1650 AW 2013 at 470 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.
The power gap is worth calling out. Rated to 75 hp, the Alumacraft PF170 2005 has a 35-hp advantage over the Alumacraft MV 1650 AW 2013's 40-hp ceiling - enough to notice on acceleration and at cruising speed, particularly with a full passenger load.
Both boats are rated for 4 passengers - a good fit for a family of four or five plus guests. Comfort at capacity is another matter; the longer hull typically means more seat options and better weight distribution.
At this size, power-to-weight ratio matters more than outright horsepower. The Alumacraft PF170 2005 comes in at 11 lbs per hp versus 12 lbs per hp for the Alumacraft MV 1650 AW 2013. The lower the ratio the more explosive the acceleration - meaningful on a short RIB where bursts of speed, quick planing, and agility in surf or tight waterways define the experience.
Bottom line: Performance buyers should lean toward the Alumacraft PF170 2005 and its 75-hp ceiling. If fuel economy and quieter running matter more than top-end speed, the Alumacraft MV 1650 AW 2013 with its 40-hp rating is the more economical daily driver.