Alumacraft MV 1650 AW   2010 boat specs
Alumacraft
Alumacraft MV 1650 AW 2010
2010
View full specs →
VS
Alumacraft Riveted Jon 1442 NCS 2011 boat specs
Alumacraft
Alumacraft Riveted Jon 1442 NCS 2011
2011
View full specs →

Alumacraft MV 1650 AW 2010 vs Alumacraft Riveted Jon 1442 NCS 2011: Same Brand, Different Boat

The Alumacraft MV 1650 AW 2010 is a modified-V design and the Alumacraft Riveted Jon 1442 NCS 2011 is a flat-bottom design, so you're likely deciding between two noticeably different on-water experiences. Hull type shapes everything from ride quality and fuel burn to dock handling and resale trajectory.

On paper these two are close siblings in the size department - Alumacraft MV 1650 AW 2010 at 16,0 ft versus Alumacraft Riveted Jon 1442 NCS 2011 at 14,0 ft. Weight tells a clearer story for trailering families: the Alumacraft MV 1650 AW 2010 tips the scales at 485 lbs - 255 lbs more than the Alumacraft Riveted Jon 1442 NCS 2011 at 230 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.

Both boats share a closely matched power ceiling - 40 hp for the Alumacraft MV 1650 AW 2010 and 25 hp for the Alumacraft Riveted Jon 1442 NCS 2011. Real-world performance will come down more to which motor is actually bolted on, its load at the time, and whether it's a 4-stroke or 2-stroke setup.

For family outings this is probably the sharpest distinction between the two. The Alumacraft MV 1650 AW 2010 is rated for 5 passengers, while the Alumacraft Riveted Jon 1442 NCS 2011 caps at 3. If you're regularly pulling extended family or a group of friends onto the water, the extra seats on the Alumacraft MV 1650 AW 2010 could be the deciding factor.

At this size, power-to-weight ratio matters more than outright horsepower. The Alumacraft Riveted Jon 1442 NCS 2011 comes in at 9 lbs per hp versus 12 lbs per hp for the Alumacraft MV 1650 AW 2010. The lower the ratio the more explosive the acceleration - meaningful on a short RIB where bursts of speed, quick planing, and agility in surf or tight waterways define the experience.

Bottom line: Choose the Alumacraft MV 1650 AW 2010 if your priority is putting more people on the water - it handles 5 passengers and at 16,0 ft it has the deck room to back that rating up comfortably. The Alumacraft Riveted Jon 1442 NCS 2011 is the smarter pick if you want a lighter, easier-to-trailer boat rated for 3 that costs less to run day-to-day.
General Boat Info
MakeAlumacraft
MakeAlumacraft
ModelMV 1650 AW
ModelRiveted Jon 1442 NCS
Model Year2010
Model Year2011
Measurements / Dimensions
Beam74 in. (1.88 m)
Beam62 in.
Beam - Meters1.88
Beam - Meters1.57
Beam - Inches74
Beam - Inches62
Weight - Detail485 lbs. (220 kg)
Weight - Detail230 lbs.
Weight - kg219.99
Weight - kg104.33
Weight - lbs.485
Weight - lbs.230
Width [transom] - Detail50 in. (1.27 m)
Width [transom] - Detailnot available
Height - Detail22 in. (.56 m)
Height - Detail20 in.
Height - Meters0.56
Height - Meters0.51
Height - Inches22
Height - Inches20
Height [transom]21 in. (.53 m)
Height [transom]15 in.
Length - Meters4.9
Length - Metersnot available
Length - Feet16
Length - Feet14
Length overall - Detail16 ft. (4.9 m)
Length overall - Detail14 ft. 0 in.
Length overall - Meters4.88
Length overall - Meters4.27
Length overall - Inches192
Length overall - Inches168
Body / Hull
Hull materialAluminum
Hull materialAluminum
Hull thickness0.102 in. (2.6 mm)
Hull thickness0.063 in.
Hull typeModified Vee
Hull typeFlat
Engine and Drivetrain
Fuel typeGas
Fuel typeGas
Drive typeOutboard
Drive typeOutboard
Engine max40 hp (30 kW)
Engine max25 hp
Operational Info
Maximum capacity1,100 lbs. (499 kg)
Maximum capacity755 lbs.
Maximum people5
Maximum people3

Alumacraft MV 1650 AW 2010 vs Alumacraft Riveted Jon 1442 NCS 2011 - Common Questions

Which is the larger boat - the Alumacraft MV 1650 AW 2010 or the Alumacraft Riveted Jon 1442 NCS 2011?
The Alumacraft MV 1650 AW 2010 is the longer of the two at 16,0 feet overall. The Alumacraft Riveted Jon 1442 NCS 2011 comes in at 14,0 feet, making it roughly 2,0 ft shorter - a meaningful difference in deck room and overall on-water presence.
Which is easier to trailer - the Alumacraft MV 1650 AW 2010 or the Alumacraft Riveted Jon 1442 NCS 2011?
For trailering, the Alumacraft Riveted Jon 1442 NCS 2011 has the edge at 230 lbs dry weight versus 485 lbs for the Alumacraft MV 1650 AW 2010. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.
Which boat can handle a bigger outboard?
The Alumacraft MV 1650 AW 2010 is rated to a maximum of 40 hp, giving it the larger power ceiling. The Alumacraft Riveted Jon 1442 NCS 2011 tops out at 25 hp. Keep in mind that maximum ratings are just that - matching the motor to the actual load and usage pattern usually matters more than chasing the ceiling.
How many people can each boat hold?
The Alumacraft MV 1650 AW 2010 is Coast Guard rated for 5 passengers, while the Alumacraft Riveted Jon 1442 NCS 2011 is certified for 3. Note that legal capacity and comfortable capacity aren't always the same thing - on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.
Which boat has the better power-to-weight ratio?
The Alumacraft Riveted Jon 1442 NCS 2011 has a better power-to-weight ratio at 9 lbs per hp compared to 12 lbs per hp for the Alumacraft MV 1650 AW 2010. A lower number means quicker acceleration and faster time to plane - the number that actually matters most on short, sporty boats like these.
Which boat is wider, and does it affect trailering?
The Alumacraft MV 1650 AW 2010 measures 74" wide, compared to 62" for the Alumacraft Riveted Jon 1442 NCS 2011. The US standard-width towing limit is 8’6" (102") in most states - anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.
Are the Alumacraft MV 1650 AW 2010 and Alumacraft Riveted Jon 1442 NCS 2011 from the same manufacturer?
Yes - both the Alumacraft MV 1650 AW 2010 and the Alumacraft Riveted Jon 1442 NCS 2011 are built by Alumacraft. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.