When two boats share the same hull type — in this case both the Alumacraft MV 1650 AW 2007 and the Alumacraft MV 1756 AW 2013 are modified vee designs with aluminum construction — the buying decision usually comes down to a handful of practical questions: how many people are you putting on the water, how far do you trailer, and what does your tow vehicle weigh?

On paper these two are close siblings in the size department — Alumacraft MV 1650 AW 2007 at 16,0 ft versus Alumacraft MV 1756 AW 2013 at 17,0 ft. At 485 lbs and 575 lbs respectively, both sit in a similar weight class — either should pair comfortably with most mid-size SUVs and half-ton trucks, though always confirm your specific tow rating with the motor added.

Both boats share a closely matched power ceiling — 40 hp for the Alumacraft MV 1650 AW 2007 and 50 hp for the Alumacraft MV 1756 AW 2013. Real-world performance will come down more to which motor is actually bolted on, its load at the time, and whether it's a 4-stroke or 2-stroke setup.

For family outings this is probably the sharpest distinction between the two. The Alumacraft MV 1650 AW 2007 is rated for 5 passengers, while the Alumacraft MV 1756 AW 2013 caps at 4. If you're regularly pulling extended family or a group of friends onto the water, the extra seats on the Alumacraft MV 1650 AW 2007 could be the deciding factor.

At this size, power-to-weight ratio matters more than outright horsepower. The Alumacraft MV 1756 AW 2013 comes in at 12 lbs per hp versus 12 lbs per hp for the Alumacraft MV 1650 AW 2007. The lower the ratio the more explosive the acceleration — meaningful on a short RIB where bursts of speed, quick planing, and agility in surf or tight waterways define the experience.