Alumacraft MV 1546 AW  DD 2005 boat specs
Alumacraft
Alumacraft MV 1546 AW DD 2005
2005
View full specs →
VS
Alumacraft Riveted Jon 1442 NCS 2012 boat specs
Alumacraft
Alumacraft Riveted Jon 1442 NCS 2012
2012
View full specs →

Alumacraft MV 1546 AW DD 2005 vs Alumacraft Riveted Jon 1442 NCS 2012: Same Brand, Different Boat

The Alumacraft MV 1546 AW DD 2005 vs Alumacraft Riveted Jon 1442 NCS 2012 comparison sits squarely in the category of decisions where specs alone won't tell the whole story: intended use, storage, and long-term ownership costs all factor in.

On paper these two are close siblings in the size department - Alumacraft MV 1546 AW DD 2005 at 15,0 ft versus Alumacraft Riveted Jon 1442 NCS 2012 at 14,0 ft. Weight tells a clearer story for trailering families: the Alumacraft MV 1546 AW DD 2005 tips the scales at 340 lbs - 110 lbs more than the Alumacraft Riveted Jon 1442 NCS 2012 at 230 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.

Both boats share a closely matched power ceiling - 25 hp for the Alumacraft MV 1546 AW DD 2005 and 25 hp for the Alumacraft Riveted Jon 1442 NCS 2012. Real-world performance will come down more to which motor is actually bolted on, its load at the time, and whether it's a 4-stroke or 2-stroke setup.

For family outings this is probably the sharpest distinction between the two. The Alumacraft MV 1546 AW DD 2005 is rated for 4 passengers, while the Alumacraft Riveted Jon 1442 NCS 2012 caps at 3. If you're regularly pulling extended family or a group of friends onto the water, the extra seats on the Alumacraft MV 1546 AW DD 2005 could be the deciding factor.

At this size, power-to-weight ratio matters more than outright horsepower. The Alumacraft Riveted Jon 1442 NCS 2012 comes in at 9 lbs per hp versus 14 lbs per hp for the Alumacraft MV 1546 AW DD 2005. The lower the ratio the more explosive the acceleration - meaningful on a short RIB where bursts of speed, quick planing, and agility in surf or tight waterways define the experience.

Bottom line: Choose the Alumacraft MV 1546 AW DD 2005 if your priority is putting more people on the water - it handles 4 passengers and at 15,0 ft it has the deck room to back that rating up comfortably. The Alumacraft Riveted Jon 1442 NCS 2012 is the smarter pick if you want a lighter, easier-to-trailer boat rated for 3 that costs less to run day-to-day.
General Boat Info
MakeAlumacraft
MakeAlumacraft
ModelMV 1546 AW DD
ModelRiveted Jon 1442 NCS
Model Year2005
Model Year2012
Measurements / Dimensions
Beam65 in.
Beam62 in.
Beam - Meters1.65
Beam - Meters1.57
Beam - Inches65
Beam - Inches62
Weight - Detail340 lbs.
Weight - Detail230 lbs.
Weight - kg154.22
Weight - kg104.33
Weight - lbs.340
Weight - lbs.230
Width [transom] - Detail46 in.
Width [transom] - Detailnot available
Height - Detail20 in.
Height - Detail20 in.
Height - Meters0.51
Height - Meters0.51
Height - Inches20
Height - Inches20
Height [transom]15 in.
Height [transom]15 in.
Length - Feet15
Length - Feet14
Length overall - Detail15 ft. 0 in.
Length overall - Detail14 ft.
Length overall - Meters4.57
Length overall - Meters4.27
Length overall - Inches180
Length overall - Inches168
Body / Hull
Hull materialAluminum
Hull materialAluminum
Hull thicknessBottom/sides: .082 in.
Hull thickness0.063 in.
Hull typenot available
Hull typeFlat
Engine and Drivetrain
Engine max25 hp
Engine max25 hp
Fuel typenot available
Fuel typeGas
Drive typenot available
Drive typeOutboard
Operational Info
Maximum people4
Maximum people3
Maximum capacitynot available
Maximum capacity755 lbs.

Alumacraft MV 1546 AW DD 2005 vs Alumacraft Riveted Jon 1442 NCS 2012 - Common Questions

Which is the larger boat - the Alumacraft MV 1546 AW DD 2005 or the Alumacraft Riveted Jon 1442 NCS 2012?
The Alumacraft MV 1546 AW DD 2005 is the longer of the two at 15,0 feet overall. The Alumacraft Riveted Jon 1442 NCS 2012 comes in at 14,0 feet, making it roughly 1,0 ft shorter - a meaningful difference in deck room and overall on-water presence.
Which is easier to trailer - the Alumacraft MV 1546 AW DD 2005 or the Alumacraft Riveted Jon 1442 NCS 2012?
For trailering, the Alumacraft Riveted Jon 1442 NCS 2012 has the edge at 230 lbs dry weight versus 340 lbs for the Alumacraft MV 1546 AW DD 2005. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.
How many people can each boat hold?
The Alumacraft MV 1546 AW DD 2005 is Coast Guard rated for 4 passengers, while the Alumacraft Riveted Jon 1442 NCS 2012 is certified for 3. Note that legal capacity and comfortable capacity aren't always the same thing - on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.
Which boat has the better power-to-weight ratio?
The Alumacraft Riveted Jon 1442 NCS 2012 has a better power-to-weight ratio at 9 lbs per hp compared to 14 lbs per hp for the Alumacraft MV 1546 AW DD 2005. A lower number means quicker acceleration and faster time to plane - the number that actually matters most on short, sporty boats like these.
Which boat is wider, and does it affect trailering?
The Alumacraft MV 1546 AW DD 2005 measures 65" wide, compared to 62" for the Alumacraft Riveted Jon 1442 NCS 2012. The US standard-width towing limit is 8’6" (102") in most states - anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.
Are the Alumacraft MV 1546 AW DD 2005 and Alumacraft Riveted Jon 1442 NCS 2012 from the same manufacturer?
Yes - both the Alumacraft MV 1546 AW DD 2005 and the Alumacraft Riveted Jon 1442 NCS 2012 are built by Alumacraft. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.