Alumacraft MV 1546 AW  DD 2005 boat specs
Alumacraft
Alumacraft MV 1546 AW DD 2005
2005
View full specs →
VS
Alumacraft PF 175 2012 boat specs
Alumacraft
Alumacraft PF 175 2012
2012
View full specs →

Alumacraft MV 1546 AW DD 2005 vs Alumacraft PF 175 2012: Same Brand, Different Boat

The Alumacraft MV 1546 AW DD 2005 vs Alumacraft PF 175 2012 comparison sits squarely in the category of decisions where specs alone won't tell the whole story: intended use, storage, and long-term ownership costs all factor in.

On paper these two are close siblings in the size department - Alumacraft MV 1546 AW DD 2005 at 15,0 ft versus Alumacraft PF 175 2012 at 17,4 ft. Weight tells a clearer story for trailering families: the Alumacraft PF 175 2012 tips the scales at 1 050 lbs - 710 lbs less than the Alumacraft MV 1546 AW DD 2005 at 340 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.

The power gap is worth calling out. Rated to 90 hp, the Alumacraft PF 175 2012 has a 65-hp advantage over the Alumacraft MV 1546 AW DD 2005's 25-hp ceiling - enough to notice on acceleration and at cruising speed, particularly with a full passenger load.

Both boats are rated for 4 passengers - a good fit for a family of four or five plus guests. Comfort at capacity is another matter; the longer hull typically means more seat options and better weight distribution.

At this size, power-to-weight ratio matters more than outright horsepower. The Alumacraft PF 175 2012 comes in at 12 lbs per hp versus 14 lbs per hp for the Alumacraft MV 1546 AW DD 2005. The lower the ratio the more explosive the acceleration - meaningful on a short RIB where bursts of speed, quick planing, and agility in surf or tight waterways define the experience.

Bottom line: The Alumacraft PF 175 2012 at 17,4 ft is the right call if deck space, comfort, and entertaining are top of your list. The Alumacraft MV 1546 AW DD 2005 at 15,0 ft wins on trailering ease, likely lower purchase price, and simpler docking - a solid choice for a buyer who wants more boat for less money.
General Boat Info
MakeAlumacraft
MakeAlumacraft
ModelMV 1546 AW DD
ModelPF 175
Model Year2005
Model Year2012
Measurements / Dimensions
Beam65 in.
Beam88 / 56 in. (2.24 / 1.42 m)
Beam - Meters1.65
Beam - Meters1.42
Beam - Inches65
Beam - Inches56
Weight - Detail340 lbs.
Weight - Detail1,050 lbs. (476.27 kg)
Weight - kg154.22
Weight - kg476.27
Weight - lbs.340
Weight - lbs.1050
Width [transom] - Detail46 in.
Width [transom] - Detail88 in. (2.13 m)
Height - Detail20 in.
Height - DetailSide Height: 23 in. (0.58 m)
Height - Meters0.51
Height - Meters0.58
Height - Inches20
Height - Inches23
Height [transom]15 in.
Height [transom]21 in. (0.53 m)
Length - Feet15
Length - Feet17.42
Length overall - Detail15 ft. 0 in.
Length overall - Detail17 ft. 5 in. (5.31 m)
Length overall - Meters4.57
Length overall - Meters5.31
Length overall - Inches180
Length overall - Inches209
Body / Hull
Hull materialAluminum
Hull materialAluminum
Hull thicknessBottom/sides: .082 in.
Hull thicknessBottom and Sides: 0.102 in. (2.6 mm)
Hull typenot available
Hull typeFlat
Engine and Drivetrain
Engine max25 hp
Engine max90 hp (67 kW)
Fuel tank capacity - Detailnot available
Fuel tank capacity - Detail21 gal. (79.5 l)
Fuel tank capacity - Litersnot available
Fuel tank capacity - Liters79.49
Fuel tank capacity - Galnot available
Fuel tank capacity - Gal21
Fuel typenot available
Fuel typeGas
Drive typenot available
Drive typeOutboard
Operational Info
Maximum people4
Maximum people4
Storagenot available
StorageBow and Aft Livewells: 20 gal. ea. (75.71 l)
Maximum capacitynot available
Maximum capacity1,195 lbs. (542 kg)

Alumacraft MV 1546 AW DD 2005 vs Alumacraft PF 175 2012 - Common Questions

Which is the larger boat - the Alumacraft MV 1546 AW DD 2005 or the Alumacraft PF 175 2012?
The Alumacraft PF 175 2012 is the longer of the two at 17,4 feet overall. The Alumacraft MV 1546 AW DD 2005 comes in at 15,0 feet, making it roughly 2,4 ft shorter - a meaningful difference in deck room and overall on-water presence.
Which is easier to trailer - the Alumacraft MV 1546 AW DD 2005 or the Alumacraft PF 175 2012?
For trailering, the Alumacraft MV 1546 AW DD 2005 has the edge at 340 lbs dry weight versus 1 050 lbs for the Alumacraft PF 175 2012. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.
Which boat can handle a bigger outboard?
The Alumacraft PF 175 2012 is rated to a maximum of 90 hp, giving it the larger power ceiling. The Alumacraft MV 1546 AW DD 2005 tops out at 25 hp. Keep in mind that maximum ratings are just that - matching the motor to the actual load and usage pattern usually matters more than chasing the ceiling.
How many people can each boat hold?
The Alumacraft MV 1546 AW DD 2005 is Coast Guard rated for 4 passengers, while the Alumacraft PF 175 2012 is certified for 4. Note that legal capacity and comfortable capacity aren't always the same thing - on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.
Which boat has the better power-to-weight ratio?
The Alumacraft PF 175 2012 has a better power-to-weight ratio at 12 lbs per hp compared to 14 lbs per hp for the Alumacraft MV 1546 AW DD 2005. A lower number means quicker acceleration and faster time to plane - the number that actually matters most on short, sporty boats like these.
Which boat is wider, and does it affect trailering?
The Alumacraft MV 1546 AW DD 2005 measures 65" wide, compared to 56" for the Alumacraft PF 175 2012. The US standard-width towing limit is 8’6" (102") in most states - anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.
Are the Alumacraft MV 1546 AW DD 2005 and Alumacraft PF 175 2012 from the same manufacturer?
Yes - both the Alumacraft MV 1546 AW DD 2005 and the Alumacraft PF 175 2012 are built by Alumacraft. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.