Alumacraft MV 1546 AW DD 2004 vs Alumacraft Pro 175 2010 - Boat Spec Comparison

Q: Which is easier to trailer — the Alumacraft MV 1546 AW DD 2004 or the Alumacraft Pro 175 2010?

For trailering, the Alumacraft Pro 175 2010 has the edge at 12 lbs dry weight versus 26 lbs for the Alumacraft MV 1546 AW DD 2004. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.

Q: What is the maximum horsepower rating for these boats?

The Alumacraft Pro 175 2010 has a documented max rating of 90 hp. Engine specifications for the Alumacraft MV 1546 AW DD 2004 were not available in our database — check the OEM spec sheet or manufacturer's website for confirmation.

Q: How many people can each boat hold?

The Alumacraft MV 1546 AW DD 2004 is Coast Guard rated for 4 passengers, while the Alumacraft Pro 175 2010 is certified for 4. Note that legal capacity and comfortable capacity aren't always the same thing — on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.

Q: Which boat is wider, and does it affect trailering?

The Alumacraft Pro 175 2010 measures 88" wide, compared to 65" for the Alumacraft MV 1546 AW DD 2004. The US standard-width towing limit is 8’6" (102") in most states — anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.

Q: Are the Alumacraft MV 1546 AW DD 2004 and Alumacraft Pro 175 2010 from the same manufacturer?

Yes — both the Alumacraft MV 1546 AW DD 2004 and the Alumacraft Pro 175 2010 are built by Alumacraft. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.

Boat Comparison

Alumacraft MV 1546 AW DD 2004 vs Alumacraft Pro 175 2010

Alumacraft

Alumacraft MV 1546 AW DD 2004

2004

View full specs →

Alumacraft

Alumacraft Pro 175 2010

2010

View full specs →

Detailed Evaluation & Buyer Recommendation

Alumacraft MV 1546 AW DD 2004 vs Alumacraft Pro 175 2010 — Same Brand, Different Boat

The Alumacraft MV 1546 AW DD 2004 vs Alumacraft Pro 175 2010 comparison sits squarely in the category of decisions where specs alone won't tell the whole story — intended use, storage, and long-term ownership costs all factor in.

The Alumacraft Pro 175 2010 tops out at 90 hp. Engine specs for the Alumacraft MV 1546 AW DD 2004 aren't listed — confirm with a dealer before selecting an outboard.

Both boats are rated for 4 passengers — a good fit for a family of four or five plus guests. Comfort at capacity is another matter; the longer hull typically means more seat options and better weight distribution.

Bottom line: The Alumacraft MV 1546 AW DD 2004 and Alumacraft Pro 175 2010 are closely matched on the specs that matter most. Test-ride both on the water you actually use, check current dealer pricing, and factor in long-term service access before you sign.

General Boat Info

MakeAlumacraft

ModelMV 1546 AW DD

ModelPro 175

Model Year2004

Model Year201

Measurements / Dimensions

Beam65 in

Beam88 in. (2.23 m) Bottom: 56 in. (1.42 m)

Beam - Meters1.65

Beam - Meters2.24

Beam - Inches65

Beam - Inches88

Draft [drive up] - DetailN/A

Draft [drive up] - Detailnot available

Weight - Detail260 lbs

Weight - Detail1,200 lbs. (544 kg)

Weight - kg117.93

Weight - kg544.31

Weight - lbs.26

Weight - lbs.12

Height - Detail20 in

Height - Detailnot available

Height - Meters0.51

Height - Metersnot available

Height - Inches2

Height - Inchesnot available

Height [transom]15 in

Height [transom]22 in. (0.6 m)

Length overall - Detail15 ft

Length overall - Detail17 ft. 5 in. (5.31 m)

Length overall - Meters4.57

Length overall - Meters5.31

Length overall - Inches18

Length overall - Inches209

Depth - Detailnot available

Depth - Detail23 in. (0.58 m)

Depth - Centimetersnot available

Depth - Centimeters58.42

Depth - Inchesnot available

Depth - Inches23

Width [transom] - Detailnot available

Width [transom] - Detail88 in. (2.2 m)

Length - Metersnot available

Length - Meters5.31

Length - Feetnot available

Length - Feet17.42

Body / Hull

Hull materialAluminum

Hull thicknessnot available

Hull thickness0.102 in. (2.6 mm)

Hull typenot available

Hull typeModified Vee

Engine and Drivetrain

Engine/s standard25 hp

Engine/s standardnot available

Fuel tank capacity - DetailN/A

Fuel tank capacity - Detail16 gal. (68 l)

Fuel tank capacity - Litersnot available

Fuel tank capacity - Liters60.57

Fuel tank capacity - Galnot available

Fuel tank capacity - Gal16

Fuel typenot available

Fuel typeGas

Drive typenot available

Drive typeOutboard

Engine maxnot available

Engine max90 hp (67 kW)

Operational Info

Water capacityN/A

Water capacitynot available

Maximum people4 persons

Maximum people4

Maximum capacitynot available

Maximum capacity1,200 lbs. (544 kg)

Trailer Info

Trailer - DetailN/A

Trailer - Detailnot available

Alumacraft MV 1546 AW DD 2004 vs Alumacraft Pro 175 2010 — Common Questions

Which is easier to trailer — the Alumacraft MV 1546 AW DD 2004 or the Alumacraft Pro 175 2010?

For trailering, the Alumacraft Pro 175 2010 has the edge at 12 lbs dry weight versus 26 lbs for the Alumacraft MV 1546 AW DD 2004. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.

What is the maximum horsepower rating for these boats?

The Alumacraft Pro 175 2010 has a documented max rating of 90 hp. Engine specifications for the Alumacraft MV 1546 AW DD 2004 were not available in our database — check the OEM spec sheet or manufacturer's website for confirmation.

How many people can each boat hold?

The Alumacraft MV 1546 AW DD 2004 is Coast Guard rated for 4 passengers, while the Alumacraft Pro 175 2010 is certified for 4. Note that legal capacity and comfortable capacity aren't always the same thing — on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.

Which boat is wider, and does it affect trailering?

The Alumacraft Pro 175 2010 measures 88" wide, compared to 65" for the Alumacraft MV 1546 AW DD 2004. The US standard-width towing limit is 8’6" (102") in most states — anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.

Are the Alumacraft MV 1546 AW DD 2004 and Alumacraft Pro 175 2010 from the same manufacturer?

Yes — both the Alumacraft MV 1546 AW DD 2004 and the Alumacraft Pro 175 2010 are built by Alumacraft. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.

← Alumacraft MV 1546 AW DD 2004 full specs ← Alumacraft Pro 175 2010 full specs