Alumacraft MV 1546 AW DD Tunnel 2013 boat specs
Alumacraft
Alumacraft MV 1546 AW DD Tunnel 2013
2013
View full specs →
VS
Alumacraft Riveted Jon 1542 2011 boat specs
Alumacraft
Alumacraft Riveted Jon 1542 2011
2011
View full specs →

Alumacraft MV 1546 AW DD Tunnel 2013 vs Alumacraft Riveted Jon 1542 2011: Same Brand, Different Boat

The Alumacraft MV 1546 AW DD Tunnel 2013 is a tunnel hull design and the Alumacraft Riveted Jon 1542 2011 is a flat-bottom design, so you're likely deciding between two noticeably different on-water experiences. Hull type shapes everything from ride quality and fuel burn to dock handling and resale trajectory.

On paper these two are close siblings in the size department - Alumacraft MV 1546 AW DD Tunnel 2013 at 15,0 ft versus Alumacraft Riveted Jon 1542 2011 at 15,0 ft. Weight tells a clearer story for trailering families: the Alumacraft MV 1546 AW DD Tunnel 2013 tips the scales at 325 lbs - 115 lbs more than the Alumacraft Riveted Jon 1542 2011 at 210 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.

Both boats share a closely matched power ceiling - 25 hp for the Alumacraft MV 1546 AW DD Tunnel 2013 and 25 hp for the Alumacraft Riveted Jon 1542 2011. Real-world performance will come down more to which motor is actually bolted on, its load at the time, and whether it's a 4-stroke or 2-stroke setup.

For family outings this is probably the sharpest distinction between the two. The Alumacraft Riveted Jon 1542 2011 is rated for 4 passengers, while the Alumacraft MV 1546 AW DD Tunnel 2013 caps at 3. If you're regularly pulling extended family or a group of friends onto the water, the extra seats on the Alumacraft Riveted Jon 1542 2011 could be the deciding factor.

At this size, power-to-weight ratio matters more than outright horsepower. The Alumacraft Riveted Jon 1542 2011 comes in at 8 lbs per hp versus 13 lbs per hp for the Alumacraft MV 1546 AW DD Tunnel 2013. The lower the ratio the more explosive the acceleration - meaningful on a short RIB where bursts of speed, quick planing, and agility in surf or tight waterways define the experience.

Bottom line: Choose the Alumacraft Riveted Jon 1542 2011 if your priority is putting more people on the water - it handles 4 passengers and at 15,0 ft it has the deck room to back that rating up comfortably. The Alumacraft MV 1546 AW DD Tunnel 2013 is the smarter pick if you want a lighter, easier-to-trailer boat rated for 3 that costs less to run day-to-day.
General Boat Info
MakeAlumacraft
MakeAlumacraft
ModelMV 1546 AW DD Tunnel
ModelRiveted Jon 1542
Model Year2013
Model Year2011
Measurements / Dimensions
Beam65 in.
Beam62 in.
Beam - Meters1.65
Beam - Meters1.57
Beam - Inches65
Beam - Inches62
Weight - Detail325 lbs.
Weight - Detail210 lbs.
Weight - kg147.42
Weight - kg95.25
Weight - lbs.325
Weight - lbs.210
Height - Detail20 in.
Height - Detail20 in.
Height - Meters0.51
Height - Meters0.51
Height - Inches20
Height - Inches20
Height [transom]15 in.
Height [transom]15 in.
Length - Feet15
Length - Feet15
Length overall - Detail15 ft.
Length overall - Detail15 ft. 0 in.
Length overall - Meters4.57
Length overall - Meters4.57
Length overall - Inches180
Length overall - Inches180
Body / Hull
Hull materialAluminum
Hull materialAluminum
Hull thickness0.0802 in.
Hull thickness0.063 in.
Hull typeTunnel
Hull typeFlat
Engine and Drivetrain
Fuel typeGas
Fuel typeGas
Drive typeOutboard
Drive typeOutboard
Engine max25 hp
Engine max25 hp
Operational Info
Maximum capacity719 lbs.
Maximum capacity775 lbs.
Maximum people3
Maximum people4

Alumacraft MV 1546 AW DD Tunnel 2013 vs Alumacraft Riveted Jon 1542 2011 - Common Questions

Which is the larger boat - the Alumacraft MV 1546 AW DD Tunnel 2013 or the Alumacraft Riveted Jon 1542 2011?
The Alumacraft Riveted Jon 1542 2011 is the longer of the two at 15,0 feet overall. The Alumacraft MV 1546 AW DD Tunnel 2013 comes in at 15,0 feet, making it roughly 0,0 ft shorter - a meaningful difference in deck room and overall on-water presence.
Which is easier to trailer - the Alumacraft MV 1546 AW DD Tunnel 2013 or the Alumacraft Riveted Jon 1542 2011?
For trailering, the Alumacraft Riveted Jon 1542 2011 has the edge at 210 lbs dry weight versus 325 lbs for the Alumacraft MV 1546 AW DD Tunnel 2013. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.
How many people can each boat hold?
The Alumacraft MV 1546 AW DD Tunnel 2013 is Coast Guard rated for 3 passengers, while the Alumacraft Riveted Jon 1542 2011 is certified for 4. Note that legal capacity and comfortable capacity aren't always the same thing - on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.
Which boat has the better power-to-weight ratio?
The Alumacraft Riveted Jon 1542 2011 has a better power-to-weight ratio at 8 lbs per hp compared to 13 lbs per hp for the Alumacraft MV 1546 AW DD Tunnel 2013. A lower number means quicker acceleration and faster time to plane - the number that actually matters most on short, sporty boats like these.
Which boat is wider, and does it affect trailering?
The Alumacraft MV 1546 AW DD Tunnel 2013 measures 65" wide, compared to 62" for the Alumacraft Riveted Jon 1542 2011. The US standard-width towing limit is 8’6" (102") in most states - anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.
Are the Alumacraft MV 1546 AW DD Tunnel 2013 and Alumacraft Riveted Jon 1542 2011 from the same manufacturer?
Yes - both the Alumacraft MV 1546 AW DD Tunnel 2013 and the Alumacraft Riveted Jon 1542 2011 are built by Alumacraft. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.