Both the Alumacraft MV 1546 AW DD Tunnel 2010 and the Alumacraft Pro 175 2008 are modified-V designs, both built in aluminium, so the buying decision usually comes down to a handful of practical questions: how many people are you putting on the water, how far do you trailer, and what does your tow vehicle weigh?
On paper these two are close siblings in the size department - Alumacraft MV 1546 AW DD Tunnel 2010 at 15,0 ft versus Alumacraft Pro 175 2008 at 17,0 ft. Weight tells a clearer story for trailering families: the Alumacraft Pro 175 2008 tips the scales at 1 200 lbs - 860 lbs less than the Alumacraft MV 1546 AW DD Tunnel 2010 at 340 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.
The power gap is worth calling out. Rated to 90 hp, the Alumacraft Pro 175 2008 has a 65-hp advantage over the Alumacraft MV 1546 AW DD Tunnel 2010's 25-hp ceiling - enough to notice on acceleration and at cruising speed, particularly with a full passenger load.
Both boats are rated for 4 passengers - a good fit for a family of four or five plus guests. Comfort at capacity is another matter; the longer hull typically means more seat options and better weight distribution.
At this size, power-to-weight ratio matters more than outright horsepower. The Alumacraft Pro 175 2008 comes in at 13 lbs per hp versus 14 lbs per hp for the Alumacraft MV 1546 AW DD Tunnel 2010. The lower the ratio the more explosive the acceleration - meaningful on a short RIB where bursts of speed, quick planing, and agility in surf or tight waterways define the experience.
Bottom line: Performance buyers should lean toward the Alumacraft Pro 175 2008 and its 90-hp ceiling. If fuel economy and quieter running matter more than top-end speed, the Alumacraft MV 1546 AW DD Tunnel 2010 with its 25-hp rating is the more economical daily driver.