Alumacraft MV 1542 NCS 2004 vs Alumacraft T14V 2008 - Boat Spec Comparison

Q: Which is easier to trailer — the Alumacraft MV 1542 NCS 2004 or the Alumacraft T14V 2008?

For trailering, the Alumacraft MV 1542 NCS 2004 has the edge at 23 lbs dry weight versus 209 lbs for the Alumacraft T14V 2008. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.

Q: Which boat can handle a bigger outboard?

The Alumacraft MV 1542 NCS 2004 is rated to a maximum of 25 hp, giving it the larger power ceiling. The Alumacraft T14V 2008 tops out at 15 hp. Keep in mind that maximum ratings are just that — matching the motor to the actual load and usage pattern usually matters more than chasing the ceiling.

Q: How many people can each boat hold?

The Alumacraft MV 1542 NCS 2004 is Coast Guard rated for 4 passengers, while the Alumacraft T14V 2008 is certified for 4. Note that legal capacity and comfortable capacity aren't always the same thing — on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.

Q: Which boat is wider, and does it affect trailering?

The Alumacraft MV 1542 NCS 2004 measures 62" wide, compared to 61" for the Alumacraft T14V 2008. The US standard-width towing limit is 8’6" (102") in most states — anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.

Q: Are the Alumacraft MV 1542 NCS 2004 and Alumacraft T14V 2008 from the same manufacturer?

Yes — both the Alumacraft MV 1542 NCS 2004 and the Alumacraft T14V 2008 are built by Alumacraft. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.

Boat Comparison

Alumacraft MV 1542 NCS 2004 vs Alumacraft T14V 2008

Alumacraft

Alumacraft MV 1542 NCS 2004

2004

View full specs →

Alumacraft

Alumacraft T14V 2008

2008

View full specs →

Detailed Evaluation & Buyer Recommendation

Alumacraft MV 1542 NCS 2004 vs Alumacraft T14V 2008 — Same Brand, Different Boat

The Alumacraft MV 1542 NCS 2004 vs Alumacraft T14V 2008 comparison sits squarely in the category of decisions where specs alone won't tell the whole story — intended use, storage, and long-term ownership costs all factor in.

Both boats share a closely matched power ceiling — 25 hp for the Alumacraft MV 1542 NCS 2004 and 15 hp for the Alumacraft T14V 2008. Real-world performance will come down more to which motor is actually bolted on, its load at the time, and whether it's a 4-stroke or 2-stroke setup.

Both boats are rated for 4 passengers — a good fit for a family of four or five plus guests. Comfort at capacity is another matter; the longer hull typically means more seat options and better weight distribution.

Bottom line: The Alumacraft MV 1542 NCS 2004 and Alumacraft T14V 2008 are closely matched on the specs that matter most. Test-ride both on the water you actually use, check current dealer pricing, and factor in long-term service access before you sign.

General Boat Info

MakeAlumacraft

ModelMV 1542 NCS

ModelT14V

Model Year2004

Model Year2008

Measurements / Dimensions

Beam62 in

Beam61 in. (1.54 m)

Beam - Meters1.57

Beam - Meters1.55

Beam - Inches62

Beam - Inches61

Weight - Detail230 lbs

Weight - Detail209 lbs. (94 kg)

Weight - kg104.33

Weight - kg94.8

Weight - lbs.23

Weight - lbs.209

Height - Detail20 in

Height - Detail26 in. (0.65 m)

Height - Meters0.51

Height - Meters0.66

Height - Inches2

Height - Inches26

Height [transom]15 in

Height [transom]15 in. (0.38 m)

Length overall - Detail15 ft

Length overall - Detail14 ft. 2 in. (4.3 m)

Length overall - Meters4.57

Length overall - Meters4.32

Length overall - Inches18

Length overall - Inches17

Width [transom] - Detailnot available

Width [transom] - Detail60 in. (1.52 m)

Length - Metersnot available

Length - Meters4.3

Length - Feetnot available

Length - Feet14

Length - Inchesnot available

Length - Inches2

Body / Hull

Hull materialAluminum

Hull thicknessnot available

Hull thicknessFull Vee Hull: Bottom-0.060 in. (1.52 mm) Sides-0.050 in. (1.27 mm)

Hull typenot available

Hull typeOther

Engine and Drivetrain

Engine max25 hp w/Tiller Steering

Engine max15 hp (11 kW)

Fuel typenot available

Fuel typeGas

Drive typenot available

Drive typeOutboard

Operational Info

Maximum people4 persons

Maximum people4

Maximum capacitynot available

Maximum capacity825 lbs. (374 kg)

Alumacraft MV 1542 NCS 2004 vs Alumacraft T14V 2008 — Common Questions

Which is easier to trailer — the Alumacraft MV 1542 NCS 2004 or the Alumacraft T14V 2008?

For trailering, the Alumacraft MV 1542 NCS 2004 has the edge at 23 lbs dry weight versus 209 lbs for the Alumacraft T14V 2008. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.

Which boat can handle a bigger outboard?

The Alumacraft MV 1542 NCS 2004 is rated to a maximum of 25 hp, giving it the larger power ceiling. The Alumacraft T14V 2008 tops out at 15 hp. Keep in mind that maximum ratings are just that — matching the motor to the actual load and usage pattern usually matters more than chasing the ceiling.

How many people can each boat hold?

The Alumacraft MV 1542 NCS 2004 is Coast Guard rated for 4 passengers, while the Alumacraft T14V 2008 is certified for 4. Note that legal capacity and comfortable capacity aren't always the same thing — on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.

Which boat is wider, and does it affect trailering?

The Alumacraft MV 1542 NCS 2004 measures 62" wide, compared to 61" for the Alumacraft T14V 2008. The US standard-width towing limit is 8’6" (102") in most states — anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.

Are the Alumacraft MV 1542 NCS 2004 and Alumacraft T14V 2008 from the same manufacturer?

Yes — both the Alumacraft MV 1542 NCS 2004 and the Alumacraft T14V 2008 are built by Alumacraft. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.

← Alumacraft MV 1542 NCS 2004 full specs ← Alumacraft T14V 2008 full specs