Alumacraft MV 1542 NCS 2002 vs Alumacraft Pro 175 2011 - Boat Spec Comparison

Q: Which is easier to trailer — the Alumacraft MV 1542 NCS 2002 or the Alumacraft Pro 175 2011?

For trailering, the Alumacraft Pro 175 2011 has the edge at 1 lbs dry weight versus 23 lbs for the Alumacraft MV 1542 NCS 2002. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.

Q: Which boat can handle a bigger outboard?

The Alumacraft Pro 175 2011 is rated to a maximum of 90 hp, giving it the larger power ceiling. The Alumacraft MV 1542 NCS 2002 tops out at 25 hp. Keep in mind that maximum ratings are just that — matching the motor to the actual load and usage pattern usually matters more than chasing the ceiling.

Q: How many people can each boat hold?

The Alumacraft MV 1542 NCS 2002 is Coast Guard rated for 4 passengers, while the Alumacraft Pro 175 2011 is certified for 4. Note that legal capacity and comfortable capacity aren't always the same thing — on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.

Q: Which boat is wider, and does it affect trailering?

The Alumacraft Pro 175 2011 measures 88" wide, compared to 62" for the Alumacraft MV 1542 NCS 2002. The US standard-width towing limit is 8’6" (102") in most states — anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.

Q: Are the Alumacraft MV 1542 NCS 2002 and Alumacraft Pro 175 2011 from the same manufacturer?

Yes — both the Alumacraft MV 1542 NCS 2002 and the Alumacraft Pro 175 2011 are built by Alumacraft. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.

Boat Comparison

Alumacraft MV 1542 NCS 2002 vs Alumacraft Pro 175 2011

Alumacraft

Alumacraft MV 1542 NCS 2002

2002

View full specs →

Alumacraft

Alumacraft Pro 175 2011

2011

View full specs →

Detailed Evaluation & Buyer Recommendation

Alumacraft MV 1542 NCS 2002 vs Alumacraft Pro 175 2011 — Same Brand, Different Boat

The Alumacraft MV 1542 NCS 2002 vs Alumacraft Pro 175 2011 comparison sits squarely in the category of decisions where specs alone won't tell the whole story — intended use, storage, and long-term ownership costs all factor in.

The power gap is worth calling out. Rated to 90 hp, the Alumacraft Pro 175 2011 has a 65-hp advantage over the Alumacraft MV 1542 NCS 2002's 25-hp ceiling — enough to notice on acceleration and at cruising speed, particularly with a full passenger load.

Both boats are rated for 4 passengers — a good fit for a family of four or five plus guests. Comfort at capacity is another matter; the longer hull typically means more seat options and better weight distribution.

Bottom line: Performance buyers should lean toward the Alumacraft Pro 175 2011 and its 90-hp ceiling. If fuel economy and quieter running matter more than top-end speed, the Alumacraft MV 1542 NCS 2002 with its 25-hp rating is the more economical daily driver.

General Boat Info

MakeAlumacraft

ModelMV 1542 NCS

ModelPro 175

Model Year2002

Model Year2011

Measurements / Dimensions

Beam62 in

Beam88 in. (2.24 m)

Beam - Meters1.57

Beam - Meters2.24

Beam - Inches62

Beam - Inches88

Weight - Detail230 lbs

Weight - Detail1,000 lbs. (453.59 kg)

Weight - kg104.33

Weight - kg453.59

Weight - lbs.23

Weight - lbs.1

Height - Detail20 in

Height - DetailSide Height: 23 in. (0.58 m)

Height - Meters0.51

Height - Meters0.58

Height - Inches2

Height - Inches23

Height [transom]15 in

Height [transom]21 in. (0.53 m)

Length overall - Detail15 ft

Length overall - Detail17 ft. 5 in. (5.31 m)

Length overall - Meters4.57

Length overall - Meters5.31

Length overall - Inches18

Length overall - Inches209

Width [transom] - Detailnot available

Width [transom] - Detail88 in. (2.24 m)

Length - Feetnot available

Length - Feet17.42

Body / Hull

Hull materialAluminum

Hull thicknessnot available

Hull thicknessBottom and Sides: 0.102 in. (2.6 mm)

Hull typenot available

Hull typeFlat

Engine and Drivetrain

Engine max25 hp w/Tiller Steering

Engine max90 hp (67 kW)

Fuel tank capacity - Detailnot available

Fuel tank capacity - Detail21 gal. (79.5 l)

Fuel tank capacity - Litersnot available

Fuel tank capacity - Liters79.49

Fuel tank capacity - Galnot available

Fuel tank capacity - Gal21

Fuel typenot available

Fuel typeGas

Drive typenot available

Drive typeOutboard

Operational Info

Maximum people4 persons

Maximum people4

Storagenot available

StorageBow and Aft Livewells: 20 gal. ea. (75.71 l)

Maximum capacitynot available

Maximum capacity1,200 lbs. (544 kg)

Alumacraft MV 1542 NCS 2002 vs Alumacraft Pro 175 2011 — Common Questions

Which is easier to trailer — the Alumacraft MV 1542 NCS 2002 or the Alumacraft Pro 175 2011?

For trailering, the Alumacraft Pro 175 2011 has the edge at 1 lbs dry weight versus 23 lbs for the Alumacraft MV 1542 NCS 2002. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.

Which boat can handle a bigger outboard?

The Alumacraft Pro 175 2011 is rated to a maximum of 90 hp, giving it the larger power ceiling. The Alumacraft MV 1542 NCS 2002 tops out at 25 hp. Keep in mind that maximum ratings are just that — matching the motor to the actual load and usage pattern usually matters more than chasing the ceiling.

How many people can each boat hold?

The Alumacraft MV 1542 NCS 2002 is Coast Guard rated for 4 passengers, while the Alumacraft Pro 175 2011 is certified for 4. Note that legal capacity and comfortable capacity aren't always the same thing — on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.

Which boat is wider, and does it affect trailering?

The Alumacraft Pro 175 2011 measures 88" wide, compared to 62" for the Alumacraft MV 1542 NCS 2002. The US standard-width towing limit is 8’6" (102") in most states — anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.

Are the Alumacraft MV 1542 NCS 2002 and Alumacraft Pro 175 2011 from the same manufacturer?

Yes — both the Alumacraft MV 1542 NCS 2002 and the Alumacraft Pro 175 2011 are built by Alumacraft. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.

← Alumacraft MV 1542 NCS 2002 full specs ← Alumacraft Pro 175 2011 full specs