Alumacraft MV 1450 AW   2002 boat specs
Alumacraft
Alumacraft MV 1450 AW 2002
2002
View full specs →
VS
Alumacraft V16 2003 boat specs
Alumacraft
Alumacraft V16 2003
2003
View full specs →

Alumacraft MV 1450 AW 2002 vs Alumacraft V16 2003 — Same Brand, Different Boat

The Alumacraft MV 1450 AW 2002 vs Alumacraft V16 2003 comparison sits squarely in the category of decisions where specs alone won't tell the whole story — intended use, storage, and long-term ownership costs all factor in.

Both boats share a closely matched power ceiling — 30 hp for the Alumacraft MV 1450 AW 2002 and 40 hp for the Alumacraft V16 2003. Real-world performance will come down more to which motor is actually bolted on, its load at the time, and whether it's a 4-stroke or 2-stroke setup.

Both boats are rated for 5 passengers — a good fit for a family of four or five plus guests. Comfort at capacity is another matter; the longer hull typically means more seat options and better weight distribution.

Bottom line: The Alumacraft MV 1450 AW 2002 and Alumacraft V16 2003 are closely matched on the specs that matter most. Test-ride both on the water you actually use, check current dealer pricing, and factor in long-term service access before you sign.
General Boat Info
MakeAlumacraft
MakeAlumacraft
ModelMV 1450 AW
ModelV16
Model Year2002
Model Year2003
Measurements / Dimensions
Beam74 in
Beam70 in
Beam - Meters1.88
Beam - Meters1.78
Beam - Inches74
Beam - Inches7
Weight - Detail265 lbs
Weight - Detail287 lbs
Weight - kg120.2
Weight - kg130.18
Weight - lbs.265
Weight - lbs.287
Height - Detail22 in
Height - Detail30 in
Height - Meters0.56
Height - Meters0.76
Height - Inches22
Height - Inches3
Height [transom]20 in
Height [transom]15/20 in. 25 in. available on special orders
Length overall - Detail14 ft
Length overall - Detail16 ft. 7 in
Length overall - Meters4.27
Length overall - Meters5.05
Length overall - Inches168
Length overall - Inches199
Draft [drive up] - Detailnot available
Draft [drive up] - DetailN/A
Body / Hull
Hull materialAluminum
Hull materialAluminum
Engine and Drivetrain
Engine max30 hp w/Tiller Steering; 40 hp w/Console Steering
Engine max40 HP
Fuel tank capacity - Detailnot available
Fuel tank capacity - DetailN/A
Operational Info
Maximum people5 persons
Maximum people5 persons
Water capacitynot available
Water capacityN/A
Trailer Info
Trailer - Detailnot available
Trailer - DetailN/A

Alumacraft MV 1450 AW 2002 vs Alumacraft V16 2003 — Common Questions

Which is easier to trailer — the Alumacraft MV 1450 AW 2002 or the Alumacraft V16 2003?
For trailering, the Alumacraft MV 1450 AW 2002 has the edge at 265 lbs dry weight versus 287 lbs for the Alumacraft V16 2003. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.
Which boat can handle a bigger outboard?
The Alumacraft V16 2003 is rated to a maximum of 40 hp, giving it the larger power ceiling. The Alumacraft MV 1450 AW 2002 tops out at 30 hp. Keep in mind that maximum ratings are just that — matching the motor to the actual load and usage pattern usually matters more than chasing the ceiling.
How many people can each boat hold?
The Alumacraft MV 1450 AW 2002 is Coast Guard rated for 5 passengers, while the Alumacraft V16 2003 is certified for 5. Note that legal capacity and comfortable capacity aren't always the same thing — on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.
Which boat is wider, and does it affect trailering?
The Alumacraft MV 1450 AW 2002 measures 74" wide, compared to 7" for the Alumacraft V16 2003. The US standard-width towing limit is 8’6" (102") in most states — anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.
Are the Alumacraft MV 1450 AW 2002 and Alumacraft V16 2003 from the same manufacturer?
Yes — both the Alumacraft MV 1450 AW 2002 and the Alumacraft V16 2003 are built by Alumacraft. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.