Alumacraft MV  1448 2009 boat specs
Alumacraft
Alumacraft MV 1448 2009
2009
View full specs →
VS
Alumacraft T12V 2010 boat specs
Alumacraft
Alumacraft T12V 2010
2010
View full specs →

Alumacraft MV 1448 2009 vs Alumacraft T12V 2010: Same Brand, Different Boat

The spec sheets list the Alumacraft MV 1448 2009 as modified vee and the Alumacraft T12V 2010 as other, so check how each hull rides in the conditions you use before you decide.

On paper these two are close siblings in the size department - Alumacraft MV 1448 2009 at 14,0 ft versus Alumacraft T12V 2010 at 12,2 ft. At 250 lbs and 160 lbs respectively, both sit in a similar weight class - either should pair comfortably with most mid-size SUVs and half-ton trucks, though always confirm your specific tow rating with the motor added.

Both boats share a closely matched power ceiling - 25 hp for the Alumacraft MV 1448 2009 and 10 hp for the Alumacraft T12V 2010. Real-world performance will come down more to which motor is actually bolted on, its load at the time, and whether it's a 4-stroke or 2-stroke setup.

For family outings this is probably the sharpest distinction between the two. The Alumacraft MV 1448 2009 is rated for 5 passengers, while the Alumacraft T12V 2010 caps at 3. If you're regularly pulling extended family or a group of friends onto the water, the extra seats on the Alumacraft MV 1448 2009 could be the deciding factor.

At this size, power-to-weight ratio matters more than outright horsepower. The Alumacraft MV 1448 2009 comes in at 10 lbs per hp versus 16 lbs per hp for the Alumacraft T12V 2010. The lower the ratio the more explosive the acceleration - meaningful on a short RIB where bursts of speed, quick planing, and agility in surf or tight waterways define the experience.

Bottom line: Choose the Alumacraft MV 1448 2009 if your priority is putting more people on the water - it handles 5 passengers and at 14,0 ft it has the deck room to back that rating up comfortably. The Alumacraft T12V 2010 is the smarter pick if you want a lighter, easier-to-trailer boat rated for 3 that costs less to run day-to-day.
General Boat Info
MakeAlumacraft
MakeAlumacraft
ModelMV 1448
ModelT12V
Model Year2009
Model Year2010
Measurements / Dimensions
Beam70 in.
Beam60 in. (1.52 m)
Beam - Meters1.78
Beam - Meters1.52
Beam - Inches70
Beam - Inches60
Weight - Detail250 lbs.
Weight - Detail160 lbs. (73 kg)
Weight - kg113.4
Weight - kg72.57
Weight - lbs.250
Weight - lbs.160
Width [transom] - Detail48 in.
Width [transom] - Detail60 in. (1.52 m)
Height - Detail21 in.
Height - Detail25 in. (0.64 m)
Height - Meters0.53
Height - Meters0.64
Height - Inches21
Height - Inches25
Height [transom]15 in. or 20 in.
Height [transom]15 in. (0.38 m)
Length - Feet14
Length - Feet12.17
Length overall - Detail14 ft.
Length overall - Detail12 ft. 2 in. (3.7 m)
Length overall - Meters4.27
Length overall - Meters3.71
Length overall - Inches168
Length overall - Inches146
Length - Metersnot available
Length - Meters3.7
Body / Hull
Hull materialAluminum
Hull materialAluminum
Hull thickness0.070 in.
Hull thicknessBottom: 0.060 in. (1.52 mm) Sides: 0.050 in. (1.27 mm)
Hull typeModified Vee
Hull typeOther
Engine and Drivetrain
Fuel typeGas
Fuel typeGas
Drive typeOutboard
Drive typeOutboard
Engine max25 hp
Engine max10 hp (7 kW)
Operational Info
Maximum capacity885 lbs.
Maximum capacity655 lbs. (297 kg)
Maximum people5
Maximum people3

Alumacraft MV 1448 2009 vs Alumacraft T12V 2010 - Common Questions

Which is the larger boat - the Alumacraft MV 1448 2009 or the Alumacraft T12V 2010?
The Alumacraft MV 1448 2009 is the longer of the two at 14,0 feet overall. The Alumacraft T12V 2010 comes in at 12,2 feet, making it roughly 1,8 ft shorter - a meaningful difference in deck room and overall on-water presence.
Which is easier to trailer - the Alumacraft MV 1448 2009 or the Alumacraft T12V 2010?
For trailering, the Alumacraft T12V 2010 has the edge at 160 lbs dry weight versus 250 lbs for the Alumacraft MV 1448 2009. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.
Which boat can handle a bigger outboard?
The Alumacraft MV 1448 2009 is rated to a maximum of 25 hp, giving it the larger power ceiling. The Alumacraft T12V 2010 tops out at 10 hp. Keep in mind that maximum ratings are just that - matching the motor to the actual load and usage pattern usually matters more than chasing the ceiling.
How many people can each boat hold?
The Alumacraft MV 1448 2009 is Coast Guard rated for 5 passengers, while the Alumacraft T12V 2010 is certified for 3. Note that legal capacity and comfortable capacity aren't always the same thing - on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.
Which boat has the better power-to-weight ratio?
The Alumacraft MV 1448 2009 has a better power-to-weight ratio at 10 lbs per hp compared to 16 lbs per hp for the Alumacraft T12V 2010. A lower number means quicker acceleration and faster time to plane - the number that actually matters most on short, sporty boats like these.
Which boat is wider, and does it affect trailering?
The Alumacraft MV 1448 2009 measures 70" wide, compared to 60" for the Alumacraft T12V 2010. The US standard-width towing limit is 8’6" (102") in most states - anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.
Are the Alumacraft MV 1448 2009 and Alumacraft T12V 2010 from the same manufacturer?
Yes - both the Alumacraft MV 1448 2009 and the Alumacraft T12V 2010 are built by Alumacraft. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.