Alumacraft Magnum 165 2000 vs Alumacraft PF 175 2011 - Boat Spec Comparison

Q: Which is easier to trailer — the Alumacraft Magnum 165 2000 or the Alumacraft PF 175 2011?

For trailering, the Alumacraft Magnum 165 2000 has the edge at 84 lbs dry weight versus 105 lbs for the Alumacraft PF 175 2011. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.

Q: What is the maximum horsepower rating for these boats?

The Alumacraft PF 175 2011 has a documented max rating of 90 hp. Engine specifications for the Alumacraft Magnum 165 2000 were not available in our database — check the OEM spec sheet or manufacturer's website for confirmation.

Q: How many people can each boat hold?

The Alumacraft Magnum 165 2000 is Coast Guard rated for 5 passengers, while the Alumacraft PF 175 2011 is certified for 4. Note that legal capacity and comfortable capacity aren't always the same thing — on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.

Q: Which boat is wider, and does it affect trailering?

The Alumacraft PF 175 2011 measures 88" wide, compared to 81" for the Alumacraft Magnum 165 2000. The US standard-width towing limit is 8’6" (102") in most states — anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.

Q: How do the fuel tanks compare on the Alumacraft Magnum 165 2000 and Alumacraft PF 175 2011?

Both boats carry similar fuel loads — 22 gallons and 21 gallons respectively. Range will depend heavily on motor choice, throttle usage, and whether you're on flat lake water or coastal chop.

Q: Are the Alumacraft Magnum 165 2000 and Alumacraft PF 175 2011 from the same manufacturer?

Yes — both the Alumacraft Magnum 165 2000 and the Alumacraft PF 175 2011 are built by Alumacraft. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.

Boat Comparison

Alumacraft Magnum 165 2000 vs Alumacraft PF 175 2011

Alumacraft

Alumacraft Magnum 165 2000

2000

View full specs →

Alumacraft

Alumacraft PF 175 2011

2011

View full specs →

Detailed Evaluation & Buyer Recommendation

Alumacraft Magnum 165 2000 vs Alumacraft PF 175 2011 — Same Brand, Different Boat

The Alumacraft Magnum 165 2000 vs Alumacraft PF 175 2011 comparison sits squarely in the category of decisions where specs alone won't tell the whole story — intended use, storage, and long-term ownership costs all factor in.

The Alumacraft PF 175 2011 tops out at 90 hp. Engine specs for the Alumacraft Magnum 165 2000 aren't listed — confirm with a dealer before selecting an outboard.Both carry nearly identical fuel loads — 22 gal and 21 gal — so range won't be a tiebreaker here.

For family outings this is probably the sharpest distinction between the two. The Alumacraft Magnum 165 2000 is rated for 5 passengers, while the Alumacraft PF 175 2011 caps at 4. If you're regularly pulling extended family or a group of friends onto the water, the extra seats on the Alumacraft Magnum 165 2000 could be the deciding factor.

Bottom line: Choose the Alumacraft Magnum 165 2000 if your priority is putting more people on the water — it handles 5 passengers and at 0,0 ft it has the deck room to back that rating up comfortably. The Alumacraft PF 175 2011 is the smarter pick if you want a lighter, easier-to-trailer boat rated for 4 that costs less to run day-to-day.

General Boat Info

MakeAlumacraft

ModelMagnum 165

ModelPF 175

Model Year2

Model Year2011

Measurements / Dimensions

Beam81"

Beam88 in. (2.24 m)

Beam - Meters2.06

Beam - Meters2.24

Beam - Inches81

Beam - Inches88

Weight - Detail840 lbs

Weight - Detail1,050 lbs. (476.27 kg)

Weight - kg381.02

Weight - kg476.27

Weight - lbs.84

Weight - lbs.105

Length overall - Detail16' 5"

Length overall - Detail17 ft. 5 in. (5.31 m)

Length overall - Meters4.88

Length overall - Meters5.31

Length overall - Inches192

Length overall - Inches209

Width [transom] - Detailnot available

Width [transom] - Detail88 in. (2.24 m)

Height - Detailnot available

Height - DetailSide Height: 23 in. (0.58 m)

Height - Metersnot available

Height - Meters0.58

Height - Inchesnot available

Height - Inches23

Height [transom]not available

Height [transom]21 in. (0.53 m)

Length - Feetnot available

Length - Feet17.42

Body / Hull

Hull materialAluminum

Hull thicknessnot available

Hull thicknessBottom and Sides: 0.102 in. (2.6 mm)

Hull typenot available

Hull typeFlat

Engine and Drivetrain

Engine/s standard40 - 65hp

Engine/s standardnot available

Fuel tank capacity - Detail22 gallons

Fuel tank capacity - Detail21 gal. (79.5 l)

Fuel tank capacity - Liters83.28

Fuel tank capacity - Liters79.49

Fuel tank capacity - Gal22

Fuel tank capacity - Gal21

Fuel typenot available

Fuel typeGas

Drive typenot available

Drive typeOutboard

Engine maxnot available

Engine max90 hp (67 kW)

Operational Info

Maximum people5 person

Maximum people4

Storagenot available

StorageBow and Aft Livewells: 20 gal. ea. (75.71 l)

Maximum capacitynot available

Maximum capacity1,195 lbs. (542 kg)

Alumacraft Magnum 165 2000 vs Alumacraft PF 175 2011 — Common Questions

Which is easier to trailer — the Alumacraft Magnum 165 2000 or the Alumacraft PF 175 2011?

For trailering, the Alumacraft Magnum 165 2000 has the edge at 84 lbs dry weight versus 105 lbs for the Alumacraft PF 175 2011. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.

What is the maximum horsepower rating for these boats?

The Alumacraft PF 175 2011 has a documented max rating of 90 hp. Engine specifications for the Alumacraft Magnum 165 2000 were not available in our database — check the OEM spec sheet or manufacturer's website for confirmation.

How many people can each boat hold?

The Alumacraft Magnum 165 2000 is Coast Guard rated for 5 passengers, while the Alumacraft PF 175 2011 is certified for 4. Note that legal capacity and comfortable capacity aren't always the same thing — on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.

Which boat is wider, and does it affect trailering?

The Alumacraft PF 175 2011 measures 88" wide, compared to 81" for the Alumacraft Magnum 165 2000. The US standard-width towing limit is 8’6" (102") in most states — anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.

How do the fuel tanks compare on the Alumacraft Magnum 165 2000 and Alumacraft PF 175 2011?

Both boats carry similar fuel loads — 22 gallons and 21 gallons respectively. Range will depend heavily on motor choice, throttle usage, and whether you're on flat lake water or coastal chop.

Are the Alumacraft Magnum 165 2000 and Alumacraft PF 175 2011 from the same manufacturer?

Yes — both the Alumacraft Magnum 165 2000 and the Alumacraft PF 175 2011 are built by Alumacraft. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.

← Alumacraft Magnum 165 2000 full specs ← Alumacraft PF 175 2011 full specs