Alumacraft Lunker II  2013 boat specs
Alumacraft
Alumacraft Lunker II 2013
2013
View full specs →
VS
Alumacraft V14 2010 boat specs
Alumacraft
Alumacraft V14 2010
2010
View full specs →

Alumacraft Lunker II 2013 vs Alumacraft V14 2010: Same Brand, Different Boat

The spec sheets list the Alumacraft Lunker II 2013 as deep vee and the Alumacraft V14 2010 as other, so check how each hull rides in the conditions you use before you decide.

On paper these two are close siblings in the size department - Alumacraft Lunker II 2013 at 16,5 ft versus Alumacraft V14 2010 at 14,4 ft. Weight tells a clearer story for trailering families: the Alumacraft Lunker II 2013 tips the scales at 705 lbs - 475 lbs more than the Alumacraft V14 2010 at 230 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.

The power gap is worth calling out. Rated to 50 hp, the Alumacraft Lunker II 2013 has a 30-hp advantage over the Alumacraft V14 2010's 20-hp ceiling - enough to notice on acceleration and at cruising speed, particularly with a full passenger load.

Both boats are rated for 5 passengers - a good fit for a family of four or five plus guests. Comfort at capacity is another matter; the longer hull typically means more seat options and better weight distribution.

At this size, power-to-weight ratio matters more than outright horsepower. The Alumacraft V14 2010 comes in at 12 lbs per hp versus 14 lbs per hp for the Alumacraft Lunker II 2013. The lower the ratio the more explosive the acceleration - meaningful on a short RIB where bursts of speed, quick planing, and agility in surf or tight waterways define the experience.

Bottom line: The Alumacraft Lunker II 2013 at 16,5 ft is the right call if deck space, comfort, and entertaining are top of your list. The Alumacraft V14 2010 at 14,4 ft wins on trailering ease, likely lower purchase price, and simpler docking - a solid choice for a buyer who wants more boat for less money.
General Boat Info
MakeAlumacraft
MakeAlumacraft
ModelLunker II
ModelV14
Model Year2013
Model Year2010
Measurements / Dimensions
Beam76 in. (1.93 m)
Beam68 in. (1.73 m)
Beam - Meters1.93
Beam - Meters1.73
Beam - Inches76
Beam - Inches68
Depth - Detail35 - 22 in. (0.89 - 0.56 m) max to floor
Depth - Detailnot available
Depth - Centimeters55.88
Depth - Centimetersnot available
Depth - Inches22
Depth - Inchesnot available
Weight - Detail705 lbs. (320 kg)
Weight - Detail230 lbs. (104 kg)
Weight - kg319.78
Weight - kg104.33
Weight - lbs.705
Weight - lbs.230
Width [transom] - Detail73 in. (1.85 m)
Width [transom] - Detail62 in. (1.58 m)
Height [transom]20 in. (0.51 m)
Height [transom]15 in. or 20 in. (0.38 m or 0.51 m)
Length - Feet16.5
Length - Feet14.42
Length overall - Detail16 ft. 6 in. (5 m)
Length overall - Detail14 ft. 5 in. (4.4 m)
Length overall - Meters5.03
Length overall - Meters4.39
Length overall - Inches198
Length overall - Inches173
Height - Detailnot available
Height - Detail30 in. (0.76 m)
Height - Metersnot available
Height - Meters0.76
Height - Inchesnot available
Height - Inches30
Length - Metersnot available
Length - Meters4.4
Body / Hull
Hull materialAluminum
Hull materialAluminum
Hull thickness0.080 in. (2 mm) bottom 0.065 in. (1.65 mm) side
Hull thicknessBottom: 0.065 in. (1.65 mm) Sides: 0.065 in. (1.65 mm)
Hull typeDeep Vee
Hull typeOther
Engine and Drivetrain
Fuel tank capacity - DetailPortable
Fuel tank capacity - Detailnot available
Fuel typeGas
Fuel typeGas
Drive typeOutboard
Drive typeOutboard
Engine max50 hp (37 kW)
Engine max20 hp (15 kW)
Operational Info
StorageBow Livewell: 13 gal. (49 l)
Storagenot available
Maximum capacity1,235 lbs. (560 kg)
Maximum capacity1,015 lbs. (542 kg)
Maximum people5
Maximum people5

Alumacraft Lunker II 2013 vs Alumacraft V14 2010 - Common Questions

Which is the larger boat - the Alumacraft Lunker II 2013 or the Alumacraft V14 2010?
The Alumacraft Lunker II 2013 is the longer of the two at 16,5 feet overall. The Alumacraft V14 2010 comes in at 14,4 feet, making it roughly 2,1 ft shorter - a meaningful difference in deck room and overall on-water presence.
Which is easier to trailer - the Alumacraft Lunker II 2013 or the Alumacraft V14 2010?
For trailering, the Alumacraft V14 2010 has the edge at 230 lbs dry weight versus 705 lbs for the Alumacraft Lunker II 2013. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.
Which boat can handle a bigger outboard?
The Alumacraft Lunker II 2013 is rated to a maximum of 50 hp, giving it the larger power ceiling. The Alumacraft V14 2010 tops out at 20 hp. Keep in mind that maximum ratings are just that - matching the motor to the actual load and usage pattern usually matters more than chasing the ceiling.
How many people can each boat hold?
The Alumacraft Lunker II 2013 is Coast Guard rated for 5 passengers, while the Alumacraft V14 2010 is certified for 5. Note that legal capacity and comfortable capacity aren't always the same thing - on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.
Which boat has the better power-to-weight ratio?
The Alumacraft V14 2010 has a better power-to-weight ratio at 12 lbs per hp compared to 14 lbs per hp for the Alumacraft Lunker II 2013. A lower number means quicker acceleration and faster time to plane - the number that actually matters most on short, sporty boats like these.
Which boat is wider, and does it affect trailering?
The Alumacraft Lunker II 2013 measures 76" wide, compared to 68" for the Alumacraft V14 2010. The US standard-width towing limit is 8’6" (102") in most states - anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.
Are the Alumacraft Lunker II 2013 and Alumacraft V14 2010 from the same manufacturer?
Yes - both the Alumacraft Lunker II 2013 and the Alumacraft V14 2010 are built by Alumacraft. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.