The Alumacraft Lunker II 2013 is a deep-V design and the Alumacraft MV 1756 AW 2006 is a modified-V design, so you're likely deciding between two noticeably different on-water experiences. Hull type shapes everything from ride quality and fuel burn to dock handling and resale trajectory.
On paper these two are close siblings in the size department - Alumacraft Lunker II 2013 at 16,5 ft versus Alumacraft MV 1756 AW 2006 at 17,0 ft. Weight tells a clearer story for trailering families: the Alumacraft Lunker II 2013 tips the scales at 705 lbs - 105 lbs more than the Alumacraft MV 1756 AW 2006 at 600 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.
Both boats share a closely matched power ceiling - 50 hp for the Alumacraft Lunker II 2013 and 50 hp for the Alumacraft MV 1756 AW 2006. Real-world performance will come down more to which motor is actually bolted on, its load at the time, and whether it's a 4-stroke or 2-stroke setup.
Both boats are rated for 5 passengers - a good fit for a family of four or five plus guests. Comfort at capacity is another matter; the longer hull typically means more seat options and better weight distribution.
At this size, power-to-weight ratio matters more than outright horsepower. The Alumacraft MV 1756 AW 2006 comes in at 12 lbs per hp versus 14 lbs per hp for the Alumacraft Lunker II 2013. The lower the ratio the more explosive the acceleration - meaningful on a short RIB where bursts of speed, quick planing, and agility in surf or tight waterways define the experience.
Bottom line: The Alumacraft Lunker II 2013 and Alumacraft MV 1756 AW 2006 are closely matched on the specs that matter most. Test-ride both on the water you actually use, check current dealer pricing, and factor in long-term service access before you sign.