Alumacraft Lunker 165 Tiller 2010 boat specs
Alumacraft
Alumacraft Lunker 165 Tiller 2010
2010
View full specs →
VS
Alumacraft MV Tex Special  2010 boat specs
Alumacraft
Alumacraft MV Tex Special 2010
2010
View full specs →

Alumacraft Lunker 165 Tiller 2010 vs Alumacraft MV Tex Special 2010: Same Brand, Different Boat

The Alumacraft Lunker 165 Tiller 2010 is a deep-V design and the Alumacraft MV Tex Special 2010 is a modified-V design, so you're likely deciding between two noticeably different on-water experiences. Hull type shapes everything from ride quality and fuel burn to dock handling and resale trajectory.

On paper these two are close siblings in the size department - Alumacraft Lunker 165 Tiller 2010 at 16,5 ft versus Alumacraft MV Tex Special 2010 at 16,0 ft. At 660 lbs and 675 lbs respectively, both sit in a similar weight class - either should pair comfortably with most mid-size SUVs and half-ton trucks, though always confirm your specific tow rating with the motor added.

Both boats share a closely matched power ceiling - 40 hp for the Alumacraft Lunker 165 Tiller 2010 and 60 hp for the Alumacraft MV Tex Special 2010. Real-world performance will come down more to which motor is actually bolted on, its load at the time, and whether it's a 4-stroke or 2-stroke setup.

Both boats are rated for 5 passengers - a good fit for a family of four or five plus guests. Comfort at capacity is another matter; the longer hull typically means more seat options and better weight distribution.

At this size, power-to-weight ratio matters more than outright horsepower. The Alumacraft MV Tex Special 2010 comes in at 11 lbs per hp versus 17 lbs per hp for the Alumacraft Lunker 165 Tiller 2010. The lower the ratio the more explosive the acceleration - meaningful on a short RIB where bursts of speed, quick planing, and agility in surf or tight waterways define the experience.

Bottom line: Performance buyers should lean toward the Alumacraft MV Tex Special 2010 and its 60-hp ceiling. If fuel economy and quieter running matter more than top-end speed, the Alumacraft Lunker 165 Tiller 2010 with its 40-hp rating is the more economical daily driver.
General Boat Info
MakeAlumacraft
MakeAlumacraft
ModelLunker 165 Tiller
ModelMV Tex Special
Model Year2010
Model Year2010
Measurements / Dimensions
Beam76 in. (1.93 m)
Beam74 in. (1.88 m) Bottom: 50 in. (1.27 m)
Beam - Meters1.93
Beam - Meters1.88
Beam - Inches76
Beam - Inches74
Depth - DetailMaximum: 35 in. (0.88 m) To Floor: 22 in. (0.56 m)
Depth - Detail21 in. (0.53 m)
Depth - Centimeters88.9
Depth - Centimeters53.34
Depth - Inches35
Depth - Inches21
Weight - Detail660 lbs. (299 kg)
Weight - Detail675 lbs. (307 kg)
Weight - kg299.37
Weight - kg306.17
Weight - lbs.660
Weight - lbs.675
Width [transom] - Detail73 in. (1.85 m)
Width [transom] - Detail69 in. (1.75 m)
Height [transom]20 in. (0.51 m)
Height [transom]20 in. (0.50 m)
Length - Meters5
Length - Meters4.88
Length - Feet16.5
Length - Feet16
Length overall - Detail16 ft. 6 in. (5 m)
Length overall - Detail16 ft. (4.88 m)
Length overall - Meters5.03
Length overall - Meters4.88
Length overall - Inches198
Length overall - Inches192
Body / Hull
Hull materialAluminum
Hull materialAluminum
Hull thicknessBottom: 0.080 in. (2 mm)
Hull thickness0.102 in. (2.5 mm)
Hull typeDeep Vee
Hull typeModified Vee
Engine and Drivetrain
Fuel typeGas
Fuel typeGas
Drive typeOutboard
Drive typeOutboard
Engine max40 hp (30 kW)
Engine max60 hp (45 kW)
Operational Info
Maximum capacity1,235 lbs. (560kg)
Maximum capacity1,010 lbs. (458 kg)
Maximum people5
Maximum people5

Alumacraft Lunker 165 Tiller 2010 vs Alumacraft MV Tex Special 2010 - Common Questions

Which is the larger boat - the Alumacraft Lunker 165 Tiller 2010 or the Alumacraft MV Tex Special 2010?
The Alumacraft Lunker 165 Tiller 2010 is the longer of the two at 16,5 feet overall. The Alumacraft MV Tex Special 2010 comes in at 16,0 feet, making it roughly 0,5 ft shorter - a meaningful difference in deck room and overall on-water presence.
Which is easier to trailer - the Alumacraft Lunker 165 Tiller 2010 or the Alumacraft MV Tex Special 2010?
For trailering, the Alumacraft Lunker 165 Tiller 2010 has the edge at 660 lbs dry weight versus 675 lbs for the Alumacraft MV Tex Special 2010. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.
Which boat can handle a bigger outboard?
The Alumacraft MV Tex Special 2010 is rated to a maximum of 60 hp, giving it the larger power ceiling. The Alumacraft Lunker 165 Tiller 2010 tops out at 40 hp. Keep in mind that maximum ratings are just that - matching the motor to the actual load and usage pattern usually matters more than chasing the ceiling.
How many people can each boat hold?
The Alumacraft Lunker 165 Tiller 2010 is Coast Guard rated for 5 passengers, while the Alumacraft MV Tex Special 2010 is certified for 5. Note that legal capacity and comfortable capacity aren't always the same thing - on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.
Which boat has the better power-to-weight ratio?
The Alumacraft MV Tex Special 2010 has a better power-to-weight ratio at 11 lbs per hp compared to 17 lbs per hp for the Alumacraft Lunker 165 Tiller 2010. A lower number means quicker acceleration and faster time to plane - the number that actually matters most on short, sporty boats like these.
Which boat is wider, and does it affect trailering?
The Alumacraft Lunker 165 Tiller 2010 measures 76" wide, compared to 74" for the Alumacraft MV Tex Special 2010. The US standard-width towing limit is 8’6" (102") in most states - anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.
Are the Alumacraft Lunker 165 Tiller 2010 and Alumacraft MV Tex Special 2010 from the same manufacturer?
Yes - both the Alumacraft Lunker 165 Tiller 2010 and the Alumacraft MV Tex Special 2010 are built by Alumacraft. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.