Alumacraft Lunker 165 LTD  2002 boat specs
Alumacraft
Alumacraft Lunker 165 LTD 2002
2002
View full specs →
VS
Alumacraft MV Angler 2000 boat specs
Alumacraft
Alumacraft MV Angler 2000
2000
View full specs →

Alumacraft Lunker 165 LTD 2002 vs Alumacraft MV Angler 2000 — Same Brand, Different Boat

The Alumacraft Lunker 165 LTD 2002 vs Alumacraft MV Angler 2000 comparison sits squarely in the category of decisions where specs alone won't tell the whole story — intended use, storage, and long-term ownership costs all factor in.

The Alumacraft Lunker 165 LTD 2002 carries a rated maximum of 50 hp. Engine data for the Alumacraft MV Angler 2000 wasn't available in our records — check the manufacturer's spec sheet before sizing a motor.

For family outings this is probably the sharpest distinction between the two. The Alumacraft Lunker 165 LTD 2002 is rated for 5 passengers, while the Alumacraft MV Angler 2000 caps at 4. If you're regularly pulling extended family or a group of friends onto the water, the extra seats on the Alumacraft Lunker 165 LTD 2002 could be the deciding factor.

Bottom line: Choose the Alumacraft Lunker 165 LTD 2002 if your priority is putting more people on the water — it handles 5 passengers and at 0,0 ft it has the deck room to back that rating up comfortably. The Alumacraft MV Angler 2000 is the smarter pick if you want a lighter, easier-to-trailer boat rated for 4 that costs less to run day-to-day.
General Boat Info
MakeAlumacraft
MakeAlumacraft
ModelLunker 165 LTD
ModelMV Angler
Model Year2002
Model Year2
Measurements / Dimensions
Beam76 in
Beam69"
Beam - Meters1.93
Beam - Meters1.75
Beam - Inches76
Beam - Inches69
Weight - Detail660 lbs
Weight - Detail620 lbs
Weight - kg299.37
Weight - kg281.23
Weight - lbs.66
Weight - lbs.62
Height - Detail37 in
Height - Detailnot available
Height - Meters0.94
Height - Metersnot available
Height - Inches37
Height - Inchesnot available
Height [transom]20 in
Height [transom]not available
Length overall - Detail16 ft. 6 in
Length overall - Detail15' 11"
Length overall - Meters5.03
Length overall - Meters4.57
Length overall - Inches198
Length overall - Inches18
Body / Hull
Hull materialAluminum
Hull materialAluminum
Engine and Drivetrain
Engine max50 HP
Engine maxnot available
Engine/s standardnot available
Engine/s standard25 - 55hp
Operational Info
Maximum people5 persons
Maximum people4 person

Alumacraft Lunker 165 LTD 2002 vs Alumacraft MV Angler 2000 — Common Questions

Which is easier to trailer — the Alumacraft Lunker 165 LTD 2002 or the Alumacraft MV Angler 2000?
For trailering, the Alumacraft MV Angler 2000 has the edge at 62 lbs dry weight versus 66 lbs for the Alumacraft Lunker 165 LTD 2002. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.
What is the maximum horsepower rating for these boats?
The Alumacraft Lunker 165 LTD 2002 has a documented max rating of 50 hp. Engine specifications for the Alumacraft MV Angler 2000 were not available in our database — check the OEM spec sheet or manufacturer's website for confirmation.
How many people can each boat hold?
The Alumacraft Lunker 165 LTD 2002 is Coast Guard rated for 5 passengers, while the Alumacraft MV Angler 2000 is certified for 4. Note that legal capacity and comfortable capacity aren't always the same thing — on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.
Which boat is wider, and does it affect trailering?
The Alumacraft Lunker 165 LTD 2002 measures 76" wide, compared to 69" for the Alumacraft MV Angler 2000. The US standard-width towing limit is 8’6" (102") in most states — anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.
Are the Alumacraft Lunker 165 LTD 2002 and Alumacraft MV Angler 2000 from the same manufacturer?
Yes — both the Alumacraft Lunker 165 LTD 2002 and the Alumacraft MV Angler 2000 are built by Alumacraft. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.