Alumacraft Lunker 165 LTD  2002 boat specs
Alumacraft
Alumacraft Lunker 165 LTD 2002
2002
View full specs →
VS
Alumacraft MV 1756 AW 2013 boat specs
Alumacraft
Alumacraft MV 1756 AW 2013
2013
View full specs →

Alumacraft Lunker 165 LTD 2002 vs Alumacraft MV 1756 AW 2013 — Same Brand, Different Boat

The Alumacraft Lunker 165 LTD 2002 vs Alumacraft MV 1756 AW 2013 comparison sits squarely in the category of decisions where specs alone won't tell the whole story — intended use, storage, and long-term ownership costs all factor in.

Both boats share a closely matched power ceiling — 50 hp for the Alumacraft Lunker 165 LTD 2002 and 50 hp for the Alumacraft MV 1756 AW 2013. Real-world performance will come down more to which motor is actually bolted on, its load at the time, and whether it's a 4-stroke or 2-stroke setup.

For family outings this is probably the sharpest distinction between the two. The Alumacraft Lunker 165 LTD 2002 is rated for 5 passengers, while the Alumacraft MV 1756 AW 2013 caps at 4. If you're regularly pulling extended family or a group of friends onto the water, the extra seats on the Alumacraft Lunker 165 LTD 2002 could be the deciding factor.

Bottom line: Choose the Alumacraft Lunker 165 LTD 2002 if your priority is putting more people on the water — it handles 5 passengers and at 0,0 ft it has the deck room to back that rating up comfortably. The Alumacraft MV 1756 AW 2013 is the smarter pick if you want a lighter, easier-to-trailer boat rated for 4 that costs less to run day-to-day.
General Boat Info
MakeAlumacraft
MakeAlumacraft
ModelLunker 165 LTD
ModelMV 1756 AW
Model Year2002
Model Year2013
Measurements / Dimensions
Beam76 in
Beam83 in
Beam - Meters1.93
Beam - Meters2.11
Beam - Inches76
Beam - Inches83
Weight - Detail660 lbs
Weight - Detail575 lbs
Weight - kg299.37
Weight - kg260.82
Weight - lbs.66
Weight - lbs.575
Height - Detail37 in
Height - Detail24 in
Height - Meters0.94
Height - Meters0.61
Height - Inches37
Height - Inches24
Height [transom]20 in
Height [transom]21 in
Length overall - Detail16 ft. 6 in
Length overall - Detail17 ft
Length overall - Meters5.03
Length overall - Meters5.18
Length overall - Inches198
Length overall - Inches204
Length - Feetnot available
Length - Feet17
Body / Hull
Hull materialAluminum
Hull materialAluminum
Hull thicknessnot available
Hull thickness0.102 in
Hull typenot available
Hull typeModified Vee
Engine and Drivetrain
Engine max50 HP
Engine max50 hp
Fuel typenot available
Fuel typeGas
Drive typenot available
Drive typeOutboard
Operational Info
Maximum people5 persons
Maximum people4
Maximum capacitynot available
Maximum capacity1,300 lbs

Alumacraft Lunker 165 LTD 2002 vs Alumacraft MV 1756 AW 2013 — Common Questions

Which is easier to trailer — the Alumacraft Lunker 165 LTD 2002 or the Alumacraft MV 1756 AW 2013?
For trailering, the Alumacraft Lunker 165 LTD 2002 has the edge at 66 lbs dry weight versus 575 lbs for the Alumacraft MV 1756 AW 2013. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.
How many people can each boat hold?
The Alumacraft Lunker 165 LTD 2002 is Coast Guard rated for 5 passengers, while the Alumacraft MV 1756 AW 2013 is certified for 4. Note that legal capacity and comfortable capacity aren't always the same thing — on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.
Which boat is wider, and does it affect trailering?
The Alumacraft MV 1756 AW 2013 measures 83" wide, compared to 76" for the Alumacraft Lunker 165 LTD 2002. The US standard-width towing limit is 8’6" (102") in most states — anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.
Are the Alumacraft Lunker 165 LTD 2002 and Alumacraft MV 1756 AW 2013 from the same manufacturer?
Yes — both the Alumacraft Lunker 165 LTD 2002 and the Alumacraft MV 1756 AW 2013 are built by Alumacraft. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.