Alumacraft Lunker 165 LTD CS 2007 boat specs
Alumacraft
Alumacraft Lunker 165 LTD CS 2007
2007
View full specs →
VS
Alumacraft MV  1448 2009 boat specs
Alumacraft
Alumacraft MV 1448 2009
2009
View full specs →

Alumacraft Lunker 165 LTD CS 2007 vs Alumacraft MV 1448 2009 — A Close Look at Two Modified Vees

When two boats share the same hull type — in this case both the Alumacraft Lunker 165 LTD CS 2007 and the Alumacraft MV 1448 2009 are modified vee designs with aluminum construction — the buying decision usually comes down to a handful of practical questions: how many people are you putting on the water, how far do you trailer, and what does your tow vehicle weigh?

On paper these two are close siblings in the size department — Alumacraft Lunker 165 LTD CS 2007 at 16,0 ft versus Alumacraft MV 1448 2009 at 14,0 ft. At 7 lbs and 25 lbs respectively, both sit in a similar weight class — either should pair comfortably with most mid-size SUVs and half-ton trucks, though always confirm your specific tow rating with the motor added.

The power gap is worth calling out. Rated to 50 hp, the Alumacraft Lunker 165 LTD CS 2007 has a 25-hp advantage over the Alumacraft MV 1448 2009's 25-hp ceiling — enough to notice on acceleration and at cruising speed, particularly with a full passenger load.

Both boats are rated for 5 passengers — a good fit for a family of four or five plus guests. Comfort at capacity is another matter; the longer hull typically means more seat options and better weight distribution.

At this size, power-to-weight ratio matters more than outright horsepower. The Alumacraft Lunker 165 LTD CS 2007 comes in at 0 lbs per hp versus 1 lbs per hp for the Alumacraft MV 1448 2009. The lower the ratio the more explosive the acceleration — meaningful on a short RIB where bursts of speed, quick planing, and agility in surf or tight waterways define the experience.

Bottom line: Performance buyers should lean toward the Alumacraft Lunker 165 LTD CS 2007 and its 50-hp ceiling. If fuel economy and quieter running matter more than top-end speed, the Alumacraft MV 1448 2009 with its 25-hp rating is the more economical daily driver.
General Boat Info
MakeAlumacraft
MakeAlumacraft
ModelLunker 165 LTD CS
ModelMV 1448
Model Year2007
Model Year2009
Measurements / Dimensions
Beam76 in. (1.92 m)
Beam70 in
Beam - Meters1.93
Beam - Meters1.78
Beam - Inches76
Beam - Inches7
Depth - DetailMaximum: 35 in. (0.88 m) To Floor: 22 in. (0.54 m)
Depth - Detailnot available
Depth - Centimeters88.9
Depth - Centimetersnot available
Depth - Inches35
Depth - Inchesnot available
Weight - Detail700 lbs. (317 kg)
Weight - Detail250 lbs
Weight - kg317.51
Weight - kg113.4
Weight - lbs.7
Weight - lbs.25
Width [transom] - Detail73 in. (1.85 m)
Width [transom] - Detail48 in
Height [transom]20 in. (0.51 m)
Height [transom]15 in. or 20 in
Length - Meters5
Length - Metersnot available
Length - Feet16
Length - Feet14
Length - Inches6
Length - Inchesnot available
Length overall - Detail16 ft. 6 in. (5 m)
Length overall - Detail14 ft
Length overall - Meters5.03
Length overall - Meters4.27
Length overall - Inches198
Length overall - Inches168
Height - Detailnot available
Height - Detail21 in
Height - Metersnot available
Height - Meters0.53
Height - Inchesnot available
Height - Inches21
Body / Hull
Hull materialAluminum
Hull materialAluminum
Hull thicknessBottom: 0.080 in. (2 mm)
Hull thickness0.070 in
Hull typeModified Vee
Hull typeModified Vee
Engine and Drivetrain
Fuel typeGas
Fuel typeGas
Drive typeOutboard
Drive typeOutboard
Engine max50 hp (37 kW)
Engine max25 hp
Operational Info
Maximum capacity1,235 lbs. (560kg)
Maximum capacity885 lbs
Maximum people5
Maximum people5

Alumacraft Lunker 165 LTD CS 2007 vs Alumacraft MV 1448 2009 — Common Questions

Which is the larger boat — the Alumacraft Lunker 165 LTD CS 2007 or the Alumacraft MV 1448 2009?
The Alumacraft Lunker 165 LTD CS 2007 is the longer of the two at 16,0 feet overall. The Alumacraft MV 1448 2009 comes in at 14,0 feet, making it roughly 2,0 ft shorter — a meaningful difference in deck room and overall on-water presence.
Which is easier to trailer — the Alumacraft Lunker 165 LTD CS 2007 or the Alumacraft MV 1448 2009?
For trailering, the Alumacraft Lunker 165 LTD CS 2007 has the edge at 7 lbs dry weight versus 25 lbs for the Alumacraft MV 1448 2009. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.
Which boat can handle a bigger outboard?
The Alumacraft Lunker 165 LTD CS 2007 is rated to a maximum of 50 hp, giving it the larger power ceiling. The Alumacraft MV 1448 2009 tops out at 25 hp. Keep in mind that maximum ratings are just that — matching the motor to the actual load and usage pattern usually matters more than chasing the ceiling.
How many people can each boat hold?
The Alumacraft Lunker 165 LTD CS 2007 is Coast Guard rated for 5 passengers, while the Alumacraft MV 1448 2009 is certified for 5. Note that legal capacity and comfortable capacity aren't always the same thing — on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.
Which boat has the better power-to-weight ratio?
The Alumacraft Lunker 165 LTD CS 2007 has a better power-to-weight ratio at 0 lbs per hp compared to 1 lbs per hp for the Alumacraft MV 1448 2009. A lower number means quicker acceleration and faster time to plane — the number that actually matters most on short, sporty boats like these.
Which boat is wider, and does it affect trailering?
The Alumacraft Lunker 165 LTD CS 2007 measures 76" wide, compared to 7" for the Alumacraft MV 1448 2009. The US standard-width towing limit is 8’6" (102") in most states — anything over that may need a wide-load permit. Confirm your specific route requirements with each state's DOT.
Are the Alumacraft Lunker 165 LTD CS 2007 and Alumacraft MV 1448 2009 from the same manufacturer?
Yes — both the Alumacraft Lunker 165 LTD CS 2007 and the Alumacraft MV 1448 2009 are built by Alumacraft. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.