Alumacraft Lunker 165 LTD CS 2005 boat specs
Alumacraft
Alumacraft Lunker 165 LTD CS 2005
2005
View full specs →
VS
Alumacraft Lunker 165 LTD Tiller 2006 boat specs
Alumacraft
Alumacraft Lunker 165 LTD Tiller 2006
2006
View full specs →

Alumacraft Lunker 165 LTD CS 2005 vs Alumacraft Lunker 165 LTD Tiller 2006 — Same Brand, Different Boat

The Alumacraft Lunker 165 LTD CS 2005 vs Alumacraft Lunker 165 LTD Tiller 2006 comparison sits squarely in the category of decisions where specs alone won't tell the whole story — intended use, storage, and long-term ownership costs all factor in.

On paper these two are close siblings in the size department — Alumacraft Lunker 165 LTD CS 2005 at 16,0 ft versus Alumacraft Lunker 165 LTD Tiller 2006 at 16,0 ft. At 7 lbs and 66 lbs respectively, both sit in a similar weight class — either should pair comfortably with most mid-size SUVs and half-ton trucks, though always confirm your specific tow rating with the motor added.

Both boats share a closely matched power ceiling — 50 hp for the Alumacraft Lunker 165 LTD CS 2005 and 50 hp for the Alumacraft Lunker 165 LTD Tiller 2006. Real-world performance will come down more to which motor is actually bolted on, its load at the time, and whether it's a 4-stroke or 2-stroke setup.

Both boats are rated for 5 passengers — a good fit for a family of four or five plus guests. Comfort at capacity is another matter; the longer hull typically means more seat options and better weight distribution.

At this size, power-to-weight ratio matters more than outright horsepower. The Alumacraft Lunker 165 LTD CS 2005 comes in at 0 lbs per hp versus 1 lbs per hp for the Alumacraft Lunker 165 LTD Tiller 2006. The lower the ratio the more explosive the acceleration — meaningful on a short RIB where bursts of speed, quick planing, and agility in surf or tight waterways define the experience.

Bottom line: The Alumacraft Lunker 165 LTD CS 2005 and Alumacraft Lunker 165 LTD Tiller 2006 are closely matched on the specs that matter most. Test-ride both on the water you actually use, check current dealer pricing, and factor in long-term service access before you sign.
General Boat Info
MakeAlumacraft
MakeAlumacraft
ModelLunker 165 LTD CS
ModelLunker 165 LTD Tiller
Model Year2005
Model Year2006
Measurements / Dimensions
Beam76 in. (1.93 m)
Beam76 in. (1.93 m)
Beam - Meters1.93
Beam - Meters1.93
Beam - Inches76
Beam - Inches76
Depth - Detail37 in. (0.94 m) Maximum to floor: 22 in. (0.56 m)
Depth - DetailMaximum: 37 in. (.94 m) To Floor: 22 in. (.56 m)
Depth - Centimeters93.98
Depth - Centimeters93.98
Depth - Inches37
Depth - Inches37
Weight - Detail700 lbs. (318 kg)
Weight - Detail660 lbs. (299 kg)
Weight - kg317.51
Weight - kg299.37
Weight - lbs.7
Weight - lbs.66
Width [transom] - Detail72.5 in. (1.84 m)
Width [transom] - Detail72.5 in. (1.84 m)
Height [transom]20 in. (0.51 m)
Height [transom]20 in. (.51 m)
Length - Meters5.03
Length - Meters5.03
Length - Feet16
Length - Feet16
Length - Inches6
Length - Inches6
Length overall - Detail16 ft. 6 in. (5.03 m)
Length overall - Detail16 ft. 6 in. (5.03 m)
Length overall - Meters5.03
Length overall - Meters5.03
Length overall - Inches198
Length overall - Inches198
Body / Hull
Hull thicknessBottom: 0.080 in. (2.0 mm) Sides: 0.65 in. (1.7 mm) 2XB Bow?2nd plate: .060 in
Hull thicknessBottom: .080 in. (2.0 mm) Sides: .065 in. (1.7 mm) 2XB Bow?2nd Plate: .060 in
Hull materialnot available
Hull materialAluminum
Hull typenot available
Hull typeModified Vee
Engine and Drivetrain
Engine max50 hp (37 kw)
Engine max50 hp (37 kw)
Fuel typenot available
Fuel typeGas
Drive typenot available
Drive typeOutboard
Operational Info
Maximum people5
Maximum people5
Maximum capacitynot available
Maximum capacity1,235 lbs. (560 kg)

Alumacraft Lunker 165 LTD CS 2005 vs Alumacraft Lunker 165 LTD Tiller 2006 — Common Questions

Which is the larger boat — the Alumacraft Lunker 165 LTD CS 2005 or the Alumacraft Lunker 165 LTD Tiller 2006?
The Alumacraft Lunker 165 LTD Tiller 2006 is the longer of the two at 16,0 feet overall. The Alumacraft Lunker 165 LTD CS 2005 comes in at 16,0 feet, making it roughly 0,0 ft shorter — a meaningful difference in deck room and overall on-water presence.
Which is easier to trailer — the Alumacraft Lunker 165 LTD CS 2005 or the Alumacraft Lunker 165 LTD Tiller 2006?
For trailering, the Alumacraft Lunker 165 LTD CS 2005 has the edge at 7 lbs dry weight versus 66 lbs for the Alumacraft Lunker 165 LTD Tiller 2006. Add a motor (typically 300–500 lbs for an outboard in this class), gear, and a partial fuel load and the difference grows. Lighter is friendlier on smaller tow vehicles and on fuel economy while hauling.
How many people can each boat hold?
The Alumacraft Lunker 165 LTD CS 2005 is Coast Guard rated for 5 passengers, while the Alumacraft Lunker 165 LTD Tiller 2006 is certified for 5. Note that legal capacity and comfortable capacity aren't always the same thing — on a full day out, most experienced boaters aim for about 80% of the rated number to keep things comfortable.
Which boat has the better power-to-weight ratio?
The Alumacraft Lunker 165 LTD CS 2005 has a better power-to-weight ratio at 0 lbs per hp compared to 1 lbs per hp for the Alumacraft Lunker 165 LTD Tiller 2006. A lower number means quicker acceleration and faster time to plane — the number that actually matters most on short, sporty boats like these.
Do these boats require an oversize trailer permit to tow on US highways?
Both the Alumacraft Lunker 165 LTD CS 2005 and Alumacraft Lunker 165 LTD Tiller 2006 share an 76 in. (1.93 m) beam — meaning both sit right at the 8’6" threshold that most US states use for standard-width loads. In most states you can tow at that width without a special permit, but regulations vary. Always check the rules for your state and any states you'll be passing through before your first long haul.
Are the Alumacraft Lunker 165 LTD CS 2005 and Alumacraft Lunker 165 LTD Tiller 2006 from the same manufacturer?
Yes — both the Alumacraft Lunker 165 LTD CS 2005 and the Alumacraft Lunker 165 LTD Tiller 2006 are built by Alumacraft. That means shared dealer networks, common parts availability, and consistent build quality across the line. The choice between them is essentially a question of how much boat you need, not which brand you trust.