The Alumacraft Fisherman 160 Tiller 2011 is a flat-bottom design and the Alumacraft Yukon 165 Tiller 2006 is a modified-V design, so you're likely deciding between two noticeably different on-water experiences. Hull type shapes everything from ride quality and fuel burn to dock handling and resale trajectory.
On paper these two are close siblings in the size department - Alumacraft Fisherman 160 Tiller 2011 at 16,3 ft versus Alumacraft Yukon 165 Tiller 2006 at 16,0 ft. Weight tells a clearer story for trailering families: the Alumacraft Yukon 165 Tiller 2006 tips the scales at 715 lbs - 115 lbs less than the Alumacraft Fisherman 160 Tiller 2011 at 600 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.
The power gap is worth calling out. Rated to 50 hp, the Alumacraft Yukon 165 Tiller 2006 has a 25-hp advantage over the Alumacraft Fisherman 160 Tiller 2011's 25-hp ceiling - enough to notice on acceleration and at cruising speed, particularly with a full passenger load.
Both boats are rated for 5 passengers - a good fit for a family of four or five plus guests. Comfort at capacity is another matter; the longer hull typically means more seat options and better weight distribution.
At this size, power-to-weight ratio matters more than outright horsepower. The Alumacraft Yukon 165 Tiller 2006 comes in at 14 lbs per hp versus 24 lbs per hp for the Alumacraft Fisherman 160 Tiller 2011. The lower the ratio the more explosive the acceleration - meaningful on a short RIB where bursts of speed, quick planing, and agility in surf or tight waterways define the experience.
Bottom line: Performance buyers should lean toward the Alumacraft Yukon 165 Tiller 2006 and its 50-hp ceiling. If fuel economy and quieter running matter more than top-end speed, the Alumacraft Fisherman 160 Tiller 2011 with its 25-hp rating is the more economical daily driver.