The Alumacraft Fisherman 160 CS 2013 vs Alumacraft MV 1650 AW SC 2005 comparison sits squarely in the category of decisions where specs alone won't tell the whole story: intended use, storage, and long-term ownership costs all factor in.
On paper these two are close siblings in the size department - Alumacraft Fisherman 160 CS 2013 at 16,3 ft versus Alumacraft MV 1650 AW SC 2005 at 16,0 ft. At 622 lbs and 680 lbs respectively, both sit in a similar weight class - either should pair comfortably with most mid-size SUVs and half-ton trucks, though always confirm your specific tow rating with the motor added.
Both boats share a closely matched power ceiling - 40 hp for the Alumacraft Fisherman 160 CS 2013 and 60 hp for the Alumacraft MV 1650 AW SC 2005. Real-world performance will come down more to which motor is actually bolted on, its load at the time, and whether it's a 4-stroke or 2-stroke setup.
Both boats are rated for 5 passengers - a good fit for a family of four or five plus guests. Comfort at capacity is another matter; the longer hull typically means more seat options and better weight distribution.
At this size, power-to-weight ratio matters more than outright horsepower. The Alumacraft MV 1650 AW SC 2005 comes in at 11 lbs per hp versus 16 lbs per hp for the Alumacraft Fisherman 160 CS 2013. The lower the ratio the more explosive the acceleration - meaningful on a short RIB where bursts of speed, quick planing, and agility in surf or tight waterways define the experience.
Bottom line: Performance buyers should lean toward the Alumacraft MV 1650 AW SC 2005 and its 60-hp ceiling. If fuel economy and quieter running matter more than top-end speed, the Alumacraft Fisherman 160 CS 2013 with its 40-hp rating is the more economical daily driver.