Matching a deep vee Alumacraft Dominator 175 CS 2013 against a modified vee Alumacraft MV 1860 AW 2007 means you're likely deciding between two genuinely different on-water experiences. Hull type shapes everything from ride quality and fuel burn to dock handling and resale trajectory.
On paper these two are close siblings in the size department — Alumacraft Dominator 175 CS 2013 at 17,8 ft versus Alumacraft MV 1860 AW 2007 at 18,0 ft. At 139 lbs and 68 lbs respectively, both sit in a similar weight class — either should pair comfortably with most mid-size SUVs and half-ton trucks, though always confirm your specific tow rating with the motor added.
The power gap is worth calling out. Rated to 150 hp, the Alumacraft Dominator 175 CS 2013 has a 100-hp advantage over the Alumacraft MV 1860 AW 2007's 50-hp ceiling — enough to notice on acceleration and at cruising speed, particularly with a full passenger load.
Both boats are rated for 6 passengers — a good fit for a family of four or five plus guests. Comfort at capacity is another matter; the longer hull typically means more seat options and better weight distribution.
At this size, power-to-weight ratio matters more than outright horsepower. The Alumacraft Dominator 175 CS 2013 comes in at 1 lbs per hp versus 1 lbs per hp for the Alumacraft MV 1860 AW 2007. The lower the ratio the more explosive the acceleration — meaningful on a short RIB where bursts of speed, quick planing, and agility in surf or tight waterways define the experience.
Bottom line: Performance buyers should lean toward the Alumacraft Dominator 175 CS 2013 and its 150-hp ceiling. If fuel economy and quieter running matter more than top-end speed, the Alumacraft MV 1860 AW 2007 with its 50-hp rating is the more economical daily driver.