Matching a deep vee Alumacraft Dominator 165 CS 2010 against a other Alumacraft Fisherman 145 Tiller 2009 means you're likely deciding between two genuinely different on-water experiences. Hull type shapes everything from ride quality and fuel burn to dock handling and resale trajectory.

On paper these two are close siblings in the size department — Alumacraft Dominator 165 CS 2010 at 16,7 ft versus Alumacraft Fisherman 145 Tiller 2009 at 14,0 ft. Weight tells a clearer story for trailering families: the Alumacraft Dominator 165 CS 2010 tips the scales at 1 175 lbs — 1 117 lbs more than the Alumacraft Fisherman 145 Tiller 2009 at 58 lbs. That difference is meaningful if you're working within a half-ton or three-quarter-ton truck's tow rating, especially once you factor in a motor, gear, and fuel.

The power gap is worth calling out. Rated to 90 hp, the Alumacraft Dominator 165 CS 2010 has a 65-hp advantage over the Alumacraft Fisherman 145 Tiller 2009's 25-hp ceiling — enough to notice on acceleration and at cruising speed, particularly with a full passenger load.

For family outings this is probably the sharpest distinction between the two. The Alumacraft Dominator 165 CS 2010 is rated for 5 passengers, while the Alumacraft Fisherman 145 Tiller 2009 caps at 4. If you're regularly pulling extended family or a group of friends onto the water, the extra seats on the Alumacraft Dominator 165 CS 2010 could be the deciding factor.

At this size, power-to-weight ratio matters more than outright horsepower. The Alumacraft Fisherman 145 Tiller 2009 comes in at 2 lbs per hp versus 13 lbs per hp for the Alumacraft Dominator 165 CS 2010. The lower the ratio the more explosive the acceleration — meaningful on a short RIB where bursts of speed, quick planing, and agility in surf or tight waterways define the experience.